ActionScript 2.0 :: Call A Button Rollover State From Inside A Another MC?
Aug 16, 2007Can you call a button rollover state from inside a another MC?
View 2 Replies
Similar Posts:
Actionscript 3 :: Adding A Rollover State To A Spark Button When State Is Disabled?
Apr 14, 2011I need to add a rollover effect to the disabled state of a Spark button. This way, users can rollover the button and know why the button is disabled.I think I would have to override ButtonBase's getCurrentSkinState. Is there anyway to test if a mouse cursor is over a disabled button?
View 1 RepliesActionScript 3.0 :: Rollover A Button And Have It Trigger The Rollover State Of Another Button
Jun 21, 2010I want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
Actionscript 2.0 :: Rollover On MC-button - Add State?
Jul 17, 2009I've been using the following code for a set of buttons that activates/deactivates the buttons so there is only one active button at a time:
[Code]....
I found this code here: [URL] I've been messing with this code for a couple days now and can't seem to figure out how to add a rollover state to this code, everything I try either glitches this code out or doesn't work... So at the moment it does half of what I want (makes it where there's only one active button at a time), what I want to do is to add a Rollover effect to the code above.
ActionScript 2.0 :: Static State Rollover Button?
Aug 8, 2009I have a navigation menu with the following code on the buttons, this works fine, you press one button, loads an external swf in movie clip holder and then when i press another button on the navigation, it loads an external swf into holder replacing the the last swf. The buttons have an rollover animation and when pressed have a static state ie you know that the button you pressed doesnt animate and you know what page you are on.
I have a another movieclip on the main stage, inside this, there is a scroller with thumbnail buttons, same code on the thumbnail buttons but on the time line in the movieclip. This too loads external swf into the movie clip holder.BUT doesnt turn off the static state in the main navigation button, so for example if i am in the home page the home page button is on.I press the another button on the navigation, and the home page button goes off and the new button stays on with new page loaded.I would like the code in the scroller to turn off the navigation button last pressed, so the thumbnail buttons, act like they are part of the navigation and not inside a movie clip..
var buttonNum:Number = 1;
for (i=1; i<=buttonNum; i++) {
this["button"+i].onRollOver = function() {[code]...
ActionScript 2.0 :: Showing A Button's Rollover State?
Mar 20, 2006You can see that there are simple roll overs for the header (this is the middle part with the photo on it and the buttons on the right); you rollOver one and the photo changes.Never one to leave well-enough alone, the boss wants to add this wrench to the works:He's not sure that people will "get" that you can hover over the buttons and will never get to see the photo and message change. So he wants the photo/message to kind of rotate through on a loop, then have it so you can override the rotation by rollingOver the button. Ok, no problem.BUT I would like the button's rollOver effect to be seen with the cooresponding photo/message. This is what I can't figure out, without trying something hacky.
View 2 RepliesActionScript 3.0 :: Specify Which Page A User Is On By Having The Button On The Rollover State?
Apr 19, 2009I would like to specify which page a user is on by having the button on the rollover state. For example, on the products page, I would like the products button to be in the rollover state. I can't figure out how I would do this. Below is the code from the as file.
package codesource
{
import flash.display.MovieClip;
import flash.events.Event;
[code].....
ActionScript 3.0 :: Button Rollover State Remains On Rollout?
Feb 9, 2009I'm in the process of building a Flash AS3 navigation for a client's website. The horizontal navigation has five main links, and a secondary navigation will drop down under three of them on rollover (this part isn't complete yet). The rollover and rollout states are animated: on rollover they gradually change color; on rollout they gradually change back to the original color.Well, I've finally gotten the code figured out (my first foray into AS3 after finally being comfortable with some things in AS2!). However, depending on how you move the mouse (i.e., if you move the mouse over the button too quickly), the rollover state remains on rollout and I can't figure out why. Can someone help? I also need to know how to designate an active state when the button is clicked (say, if you clicked on Projects, the Projects button would be highlighted (the rollover state) when you're on that page.The link to the in-progress navigation is located here: http:[url].... And this is the AS:
var homeLink:URLRequest = new URLRequest("../index.htm");
var mySound:Sound = new clickSound();
home_mc.buttonMode = true;[code]......
IDE :: Button In A Movie Clip - Maintaining The Rollover State?
Mar 4, 2009I'm trying to highlight the current 'page' / movieclip by showing the onrollover state in navigation display/button.So the colour remains the onrollover state (in this case blue) while the particular movie clip/'page' is displaying. Changing when the user rolls over another button.I have two issues:1. I understand I have to place the button within a movieclip and have been experimenting with button '02' in the attached example.fla - however now I have done this the original action contained within the movieclip instance myScreen_mc is no longer working.
View 3 RepliesActionScript 3.0 :: Button Rollover State Disabled - Mouseout Not Working
Jan 29, 2007I am using a ENTER_FRAME to destroy the rollover state of my button. I cannot use a MOUSE_OUT, because I have buttons on top. Is there a better way to do this?
Code:
package {
import flash.display.MovieClip;
import flash.events.MouseEvent;
import flash.events.*
import Tween
[Code] .....
ActionScript 2.0 :: RollOver State That Stays When User Clicks A Button?
Oct 11, 2007i wrote many things (something like back functions) but i failed. my code and my swf is below.
Code:
stop();
import mx.transitions.Tween;
[code].....
ActionScript 2.0 :: Button Press - Keep The Rollover State Active If Clicked
Aug 22, 2008I want to have a button with a rollover state that is different that the out state. I got that part, but I also want to keep the rollover state active if clicked. I can think of a couple ways to do it but I'm certain there is an easier way to do it. I have about 8 buttons and when I click on on I want that to stay in the rollover state, then when I click on another one I want the first to go back to the out state and the new one that I clicked to go to the over state and stay there.
View 3 RepliesProfessional :: Make The Button Rollover State Exist On The Highest Layer?
Apr 29, 2008I'm making an interactive map of the U.S. The layer with the outlines of the U.S. states sits on top. It has to sit on top because otherwise the outlines don't show up above the color fills for each state. I want a popup balloon to appear when you roll over each U.S. state. However, when I turn a state, say, New York, into a button, the button layer sits below the outline layer. So when I create the popup box for the button's rollover state, the popup box is *under* the US state outlines. How can I make the button rollover state exist on the highest layer?
View 2 RepliesActionScript 2.0 :: Make The Clicked Button Stay On The Rollover State In The Movie
Feb 1, 2006i am working on a flash project i want to make the clicked button stay on the rollover state in the movie
see the fla file, i am using flash 8 pro
i was thinking to make frame by frame but i have many many buttons
ActionScript 2.0 :: Move The Cursor Away Too Quickly The RollOut Does Not Happen And The Button Is Left In RollOver State?
Mar 16, 2005I have created this menu with 5 buttons. The script attached to these buttons tells a movie clip to play certain sections of the clip to create the mouse over mouse out effect. The problem is if I move the cursor away too quickly the rollOut does not happen and the button is left in rollOver state.
View 3 RepliesIDE :: "this" Inside Functions - Change Button State When Mouse Is Over A Button
Sep 3, 2009Let's say I have 3 buttons (movieclips) and, using AS2, I want that when mouse is over a button, that button changes its state, something like
[Code]...
so that the same thing happens for each button when the mouse is rolled over it, by simply calling for each button a function inside which I refer to the button by using "this". And the problem is I cannot (don't know) how to do this in AS3. I mean if I use "this" inside a function, this refers to the main timeline. So is there a possibility to write a function like
[Code]...
ActionScript 2.0 :: Button RollOver - Draw And Call A Simple Movie Clip?
May 13, 2010I am new to actionscripts and I'm having some difficulty. I am creating a website that teaches kids about the about the brain and I am creating a website very familiar to this one, http:[url].......
So far I know how to draw and call a simple movie clip such as what you see below. What I am trying to do is create the features that you see on the above website.I'll try to explain as best as possible what I have done so far:I created one flash file and drew the background for where the text will display. Next I created several movie clips for each of the brain parts and I placed an invisible button over each of these movies.For example I told the button,"cerebellum_button" to play the movie "cerebellum_mc" and told it to go to the"turnon" label."Once it stopped at the label "turnoff" it displayed the text to explain what the cerebellum does.
I feel that my code is redundant because I�m having to create a button for each animated movie clip and in each on of the movie clips I have text that will display. It seems to me that I can somehow create text for all of the movie clips in one centralized location and call each one of those text by using labels. Is there a way that I can centralize all of the text then call it? My aim is to have the user roll over the brain part, have it animate, and have it display the text to explain what that brain part does.I have one invisable
button and one animated movie that includes text.
cerebellum_button.onRollOver = function(){
cerebellum_mc.gotoAndStop("turnon");[cod].....
Duplicating Button Inside The Mc Text That Added That Animates On Mouse Rollover
Apr 17, 2009I create a button(MC) and want to duplicate it and easily change the text inside this button... basically I have an mc that acts as a button so inside the mc I have text that I added that animates on mouse rollover. Now I duplicate this mc in the library go into the mc and want to change the text, and when I do, the text in the original button also changes. This happens because the text is a Tween so it's using the same tween from the library for the new button. Is there a quick way to avoid this? I don't see anyway other than typing in the text again in the new button and animating it again.
View 6 RepliesActionScript 2.0 :: When Rollover The Button It Goes And Plays The Label Called Lb-over Which Is Inside The NavBT?
Sep 5, 2004Like if i have an instance of an mc called NavBT which is inside a button. now on the button actions can i put this code:
on (rollOver) {
this.NavBt.gotoAndPlay("lb-over");
}
so that when i rollover the button it goes and plays the label called lb-over which is inside the NavBT?
ActionScript 3.0 :: Call A Button Inside A Mc?
Apr 22, 2011How to call a button which is inside a movieclip.
View 2 RepliesActionScript 2.0 :: CS3 Button Inside 2 Movie Clips Call First 1
Nov 9, 2009I'm having a problem with something which i thought i knew and apparently i dont.I have 2 Movieclips in my scene. i have "whole" and inside it "but1gallery" inside "but1gallery" i have a button named "but1". What i need is to get to a frame inside mc "whole" when clicking "but1". this is my code(im using AS2):
View 1 RepliesActionScript 3.0 :: Call Button Function That Is Inside A Movieclip
Oct 28, 2009I have a mailTo: function that needs to be added to a button that sits inside of a movieclip. I put the code inside the actionscript layer in the movieclip.[code]...
View 2 RepliesActionScript 2.0 :: Call This Function From A Button Inside A Movie Clip?
Jul 1, 2004I have a function at frame 1 (_root). Well, i am trying to call this function from a button, inside a movie clip, but it's not successful..
View 2 RepliesIDE :: Rollover Menu Buttons - Rollover A Button That The Whole Button Image Enlarges And Moves In Front Of The Other?
Mar 26, 2010I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 RepliesIDE :: Animated Rollover / Out State
Jun 16, 2009I have an issue with an animated rollover/out state that I have created. I have seven movieclips that I am using as buttons and when rolled over/out play a different frame of the MC and move all the other mc's with an actionscript tween. The code works as it should but when I try to rollover/out of the mc to quickly the whole thing goes haywire and all the clips get out of place. I have tried to disable the buttons as soon as the user rollover on the mc but it doesn't seem to have any effect. I am only posting the code for one of the mc (publicist_btn) since all the code for the rest are the same.
[Code]...
ActionScript 2.0 :: Button Inside MovieClip To Call Function In Main Timeline
Oct 4, 2010I'm having a bit of a hard time with calling a function in the main timeline through a button in a movieclip. The mc is in the main timeline and in it I added a button with this.removeMovieClip(); and so far it works, but when I try to call a function from the main timeline it just doesn't seem to work.
View 13 RepliesActionScript 3.0 :: Add Button Inside Move Clip And Call It From Main Timeline?
Mar 16, 2012On the main timeline I have a movie clip called clock_mc and playBtn playBtn is placed in the center of clock_mc When you press playBtn clock_mc starts playing
playBtn.addEventListener(MouseEvent.CLICK, playClock);
function playClock(event:MouseEvent):void
{
if (event.target == playBtn)
[Code].....
I've tryed to placed the replayBtn on the stage on the main timeline and I've set it up to replayBtn.visible = false; And then I add replayBtn.visible = true; to last AS frame of clock_mc but it wont work Even when I put the button physically to the last frame of clock_mc it will not work either.
ActionScript 3.0 :: Call A Button Inside A MovieClip, With Names Stored In Arrays
Mar 10, 2012I have an Arrays that contains the names of MovieClips:
Code:
var MyMCs:Array = ["A","B","C","D","E"];
The actual MovieClips names are "MC_A", "MC_B", etc..., I use this method so I reuse the same Array for multiple tasks, I simply add what ever it's needed to the name to match the task at hand. On this case I add "MC_".
Then I have multiple Arrays, with the same names of the values of MyMCs. The values of each these Arrays are the names of buttons that are inside the movieclips of MyMCs:
Code:
var A:Array = ["RR","TT"];
var B:Array = ["YY","UU"];
etc...
I could add a listener to a button this way:
Code:
MC_A.YY.addEventListener(MouseEvent.CLICK, DoSomething)
My problem is that i want it to be done dynamically, using the Arrays values in a loop to add Listeners to the all buttons. The loop system is not a problem for me... my real problem is in the dynamic attribution itself.
Here is what I have:
Code:
//'i' and 'j' have previously been created
for(i=0; i<MyMCs.length; i++){
for(j=0; j<this[MyMCs[i]].length; j++){
[Code]....
I know that this is correct since I tried them separately and I can trace the proper values.
I know that my problem is in the "this" since I get an error message stating:
1084: Syntax error: expecting identifier before this.
I suppose it should state something else... I tryed with "root", "parent", "child", "MovieClip"... with no luck...
ActionScript 3.0 :: [CS4] ComboBox RollOver State?
May 18, 2009I've been researching all day and it seems like this is impossible to do. I see you can setStyle on ComboBoxes/Lists & other components but... How do you control the style for a Roll Over state? I'm not looking to change colors but instead, turn underlining on and off during MOUSE_OVER and MOUSE_OUT, respectively
View 2 RepliesActionScript 3.0 :: Show A RollOver State On A Given Mc?
Feb 12, 2009im outta it. The Flash files i created for a project are WAY WAY too slow in terms of time of reaction. I can
take seconds to simply show a rollOver state on a given mc. And very erratic behaving.
I did other projects before without any problem. Its slow local, on the server, standalone, in browser, well