ActionScript 2.0 :: Rollover Animation Stopping At It's 'on' State On Release
Nov 18, 2004
i have a problem with a rollover animation stopping at it's 'on' state on release. i have a movie clip that fades text up from 0% at keyframe 1 to 100% at keyframe 10 and back down to 0% at keyframe 19. i have an invisible button above this with the following:
[Code]...
the visible bit is to turn off the invisible button on release. the problem is that with the following code, all that happens is the movie plays out from 11 on release. i want it to stop at keyframe 10 (where it is).
View 1 Replies
Similar Posts:
Jan 16, 2011
below is some code i am using to rewind / play an animaion depending on the rollover state. only ting is i would like to have it so that i could do something like:
playFrames(homeBtn)...
this way i can use the same function over and over but i am not sure how to write this. i think its someting like function playFrames(obj); and then you do something with this...
[Code]...
View 3 Replies
Apr 14, 2011
I need to add a rollover effect to the disabled state of a Spark button. This way, users can rollover the button and know why the button is disabled.I think I would have to override ButtonBase's getCurrentSkinState. Is there anyway to test if a mouse cursor is over a disabled button?
View 1 Replies
Jan 24, 2012
Okay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...
View 1 Replies
Jan 21, 2010
I Have this code:
this.map_fade.map.image.tar_total.btn_bp_035.onRollOver = function() {
_root.map_fade.map.zoom.zoomer_txt_right.text = ("xxxxx");
trace("over");
}
this.map_fade.map.image.tar_total.btn_bp_035.onRelease = function() {
trace("release");
}
The strange thing (for me ) is that the on RollOver works and the on Release does not.
View 6 Replies
Jul 5, 2008
This must be a very basic question, but I'm lost on it.The premise is simple. OnRollOver button 'A' gets color 'X', onRollOut button 'A' gets color 'Y', onRelease button 'A' gets color 'Z'.Now, ofcourse, when a button gets pressed, it gets a highlight color. But as soon as the user rolls out, the onRollOut part kicks in a changes the color back to 'Y', while it should remain at 'Z' as long as no other button is clicked.This is a very basic problem, but I'm still asking. Is there a way to solve this easily? Do I need to start using booleans and if statements to fix this?
View 9 Replies
Jul 28, 2004
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 Replies
Jun 24, 2004
I've got this following scripts to create button through action script. However during onrollover/onrelease, the text (button name) is dissapear.Here's the code:
Code:
depth = 1;
mouse_over_colour = 0xCCCCCC;
mouse_clicked_colour = 0x666666;[code]....
View 7 Replies
Apr 20, 2004
I have the following code to control the rollOver, rollOut and release states from my buttons (btn_company, btn_products, btn_services and btn_enquiry):
Code:
for (var i in this) {
if (this[i]._name.substr(0, 4) == "btn_") {[code]...
I also have 4 movieclips (title_company, title_products, title_services and title_enquiry) which I also want to control with those buttons. When btn_company is pressed, title_company should go to frame 2, When after that btn_products is pressed title-products should go to frame 2 and title-company should go back to frame one.
View 14 Replies
Jun 24, 2004
I've got this following scripts to create button through action script. However during onrollover/onrelease, the text (button name) is dissapear.
Code:
depth = 1;
mouse_over_colour = 0xCCCCCC;
mouse_clicked_colour = 0x666666;
area_width = 200;
[code]...
View 7 Replies
Jun 21, 2010
I want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
View 4 Replies
Apr 29, 2003
i'm trying to create some buttons as MCs that will load random imageMCs on release or rollover i think i am supposed to use math random in some form with MCs but i have no idea how to execute the script for that
View 1 Replies
Dec 20, 2007
Heres the code: [URL] Heres the problem, how do I get the scroller to pause or stop on rolling over the movie clips that are scrolling. Also when click on them I want to play a movie clip on the root time line.
View 1 Replies
Jun 16, 2009
I have an issue with an animated rollover/out state that I have created. I have seven movieclips that I am using as buttons and when rolled over/out play a different frame of the MC and move all the other mc's with an actionscript tween. The code works as it should but when I try to rollover/out of the mc to quickly the whole thing goes haywire and all the clips get out of place. I have tried to disable the buttons as soon as the user rollover on the mc but it doesn't seem to have any effect. I am only posting the code for one of the mc (publicist_btn) since all the code for the rest are the same.
[Code]...
View 1 Replies
Oct 22, 2010
Note: I am only using the Flash animation in IE only as I created an equivalent, jQuery based animation for all other browsers (because, surprise, IE didn't handle the jQuery version).look at this in IE only.The Problemhen you hover over the dropdown menus, the Flash animation temporarily "freezes" and the continues. This causes choppy behavior in the Flash animation.
View 1 Replies
May 18, 2009
I've been researching all day and it seems like this is impossible to do. I see you can setStyle on ComboBoxes/Lists & other components but... How do you control the style for a Roll Over state? I'm not looking to change colors but instead, turn underlining on and off during MOUSE_OVER and MOUSE_OUT, respectively
View 2 Replies
Feb 12, 2009
im outta it. The Flash files i created for a project are WAY WAY too slow in terms of time of reaction. I can
take seconds to simply show a rollOver state on a given mc. And very erratic behaving.
I did other projects before without any problem. Its slow local, on the server, standalone, in browser, well
View 5 Replies
Jul 17, 2009
I've been using the following code for a set of buttons that activates/deactivates the buttons so there is only one active button at a time:
[Code]....
I found this code here: [URL] I've been messing with this code for a couple days now and can't seem to figure out how to add a rollover state to this code, everything I try either glitches this code out or doesn't work... So at the moment it does half of what I want (makes it where there's only one active button at a time), what I want to do is to add a Rollover effect to the code above.
View 3 Replies
Jun 15, 2006
I am trying to remove a rollover and rollout states from a button, AFTER the button has been pressed. I want to KEEP that button in its pressed state once pressed. How might I do this?
[Code]...
View 3 Replies
Nov 17, 2009
I need to know if it's possible to have an HTML rollOver state effect Flash. I want the user to rollOver an HTML button and when they do, the Flash movie below it plays.
View 3 Replies
Aug 8, 2009
I have a navigation menu with the following code on the buttons, this works fine, you press one button, loads an external swf in movie clip holder and then when i press another button on the navigation, it loads an external swf into holder replacing the the last swf. The buttons have an rollover animation and when pressed have a static state ie you know that the button you pressed doesnt animate and you know what page you are on.
I have a another movieclip on the main stage, inside this, there is a scroller with thumbnail buttons, same code on the thumbnail buttons but on the time line in the movieclip. This too loads external swf into the movie clip holder.BUT doesnt turn off the static state in the main navigation button, so for example if i am in the home page the home page button is on.I press the another button on the navigation, and the home page button goes off and the new button stays on with new page loaded.I would like the code in the scroller to turn off the navigation button last pressed, so the thumbnail buttons, act like they are part of the navigation and not inside a movie clip..
var buttonNum:Number = 1;
for (i=1; i<=buttonNum; i++) {
this["button"+i].onRollOver = function() {[code]...
View 2 Replies
Mar 20, 2006
You can see that there are simple roll overs for the header (this is the middle part with the photo on it and the buttons on the right); you rollOver one and the photo changes.Never one to leave well-enough alone, the boss wants to add this wrench to the works:He's not sure that people will "get" that you can hover over the buttons and will never get to see the photo and message change. So he wants the photo/message to kind of rotate through on a loop, then have it so you can override the rotation by rollingOver the button. Ok, no problem.BUT I would like the button's rollOver effect to be seen with the cooresponding photo/message. This is what I can't figure out, without trying something hacky.
View 2 Replies
Jun 18, 2006
So I have a window that slides in when its rolled over. It goes back to its origin when the user rolls off the window. Now within that window I have a scroll feature taht creates a conflict with the window actions when the user tries to use the scrollbar elements. I want the window to stay open, while the user is scrolling and i want the window to close when the user rolls off the window.
It could be easier to have the user click the window open/closed...but I was wondering if there is a way I could keep my original vision...here is what i wrote for the window code:
[AS]window.backdimmer._alpha=0;
window.trigger.onRollOver = function() {
window.slideTo(-360, "_y", .4, "easeoutbounce");
[Code]....
View 3 Replies
Dec 22, 2009
I am a Noob to ActionScripting and am having problems getting some movieclips to link to different URLs on release. I am able to get them to animate, and I am able to get them to link to an html page in the same folder, but I can�t get both functionalities to work at the same time and it is driving me crazy!! I've tried putting the actionscript in the instance object, in the action layer, and other things and nothing seems to work!?I believe that the actionscripting needs to be done in the "baners" movieclip, but it could also be the "Symbol 3" movieclip
Here is also a link to the . See, if you mouse over the first two clips, they animate, but they do not go to the HTML page if you click on them. The third clip will go to the page success1.html in the same folder if you click on it, but it does not animate on mouse over.I'm using Flash CS3 as my editor and I'm using ActionScript 2.0 for the scripting
View 5 Replies
Oct 25, 2010
Let's say I have a button called HOME, and in this button the word home is in HELVETICA FONT REGULAR STYLE. Now, Helvetica has lots of styles.Say I want the rollover state to be HELVETICA REGULAR. How can I do that with actionscript? My BTN instance name is "home", and my text field instance inside the btn is "home_txt".
and some general question: is it better just to create buttons for each category, or just create one general button, and reuse it giving a different instance name every time? Like, should the word HOME be a button, or should I add a rectangle button underneath it and change the instance name accordingly?
View 1 Replies
Apr 19, 2009
I would like to specify which page a user is on by having the button on the rollover state. For example, on the products page, I would like the products button to be in the rollover state. I can't figure out how I would do this. Below is the code from the as file.
package codesource
{
import flash.display.MovieClip;
import flash.events.Event;
[code].....
View 2 Replies
Feb 9, 2009
I'm in the process of building a Flash AS3 navigation for a client's website. The horizontal navigation has five main links, and a secondary navigation will drop down under three of them on rollover (this part isn't complete yet). The rollover and rollout states are animated: on rollover they gradually change color; on rollout they gradually change back to the original color.Well, I've finally gotten the code figured out (my first foray into AS3 after finally being comfortable with some things in AS2!). However, depending on how you move the mouse (i.e., if you move the mouse over the button too quickly), the rollover state remains on rollout and I can't figure out why. Can someone help? I also need to know how to designate an active state when the button is clicked (say, if you clicked on Projects, the Projects button would be highlighted (the rollover state) when you're on that page.The link to the in-progress navigation is located here: http:[url].... And this is the AS:
var homeLink:URLRequest = new URLRequest("../index.htm");
var mySound:Sound = new clickSound();
home_mc.buttonMode = true;[code]......
View 0 Replies
Apr 27, 2005
was wondering how you could make a rollover/rollout over an swf and change the image without reverting back to the original image. For instance, or more specifically,How would you create the effect where you have a permanent change on a mouserollover so that it does not go back to the original design? I made two movie clips and I put them together so that now when the mouse rollsover or you click on the original movie clip, the second movie clip is played, but the second movie clip gets cut off as soon as the mouse moves away and reverts to the original movie clip. I also wanted to stop the second movie clip from looping or replaying if clicked upon - just play once
View 1 Replies
Aug 16, 2007
Can you call a button rollover state from inside a another MC?
View 2 Replies
Mar 4, 2009
I'm trying to highlight the current 'page' / movieclip by showing the onrollover state in navigation display/button.So the colour remains the onrollover state (in this case blue) while the particular movie clip/'page' is displaying. Changing when the user rolls over another button.I have two issues:1. I understand I have to place the button within a movieclip and have been experimenting with button '02' in the attached example.fla - however now I have done this the original action contained within the movieclip instance myScreen_mc is no longer working.
View 3 Replies
