I've got this following scripts to create button through action script. However during onrollover/onrelease, the text (button name) is dissapear.Here's the code:
Code:
depth = 1;
mouse_over_colour = 0xCCCCCC;
mouse_clicked_colour = 0x666666;[code]....
I've got this following scripts to create button through action script. However during onrollover/onrelease, the text (button name) is dissapear.
Code:
depth = 1;
mouse_over_colour = 0xCCCCCC;
mouse_clicked_colour = 0x666666;
area_width = 200;
[code]...
Underlined Text On (rollOver) Is there an action script to do on (rollover) underline text? It would be on a button that would also, on (release) gotoAndPlay a frame. I know you can have a movie with AS like this:
[Code]....
But when I add the on (release) to the movie it doesnt advance the timeline on (release). And when I change the file to a button instead of a movie clip it doesnt do the underline on (rollOver).
I need to add score points and load dynamic text at the same time. This is my code.
on (release) {
//This is where I need to load dynamic text
//-----"response" is my dynamic text field; same as "total"-----
[Code]....
I need to add score points and load dynamic text at the same time. This is my code.
on (release) {
//This is where I need to load dynamic text
//-----"response" is my dynamic text field; same as "total"-----
[Code]....
I have a problem with a clear interval command that only half works,when i select the the high button the interval clears but when i reset the high button the interval starts again,also the interval does not stop when the low button text shows low.I get the trace action but no clear interval.
Code:
auxcont=function(){
if(high_txt.text=="reset"){
clearInterval(myInterval);[code]....
on low system circulates between pump on and off.on high system is in high mode .
I Have this code:
this.map_fade.map.image.tar_total.btn_bp_035.onRollOver = function() {
_root.map_fade.map.zoom.zoomer_txt_right.text = ("xxxxx");
trace("over");
}
this.map_fade.map.image.tar_total.btn_bp_035.onRelease = function() {
trace("release");
}
The strange thing (for me ) is that the on RollOver works and the on Release does not.
This must be a very basic question, but I'm lost on it.The premise is simple. OnRollOver button 'A' gets color 'X', onRollOut button 'A' gets color 'Y', onRelease button 'A' gets color 'Z'.Now, ofcourse, when a button gets pressed, it gets a highlight color. But as soon as the user rolls out, the onRollOut part kicks in a changes the color back to 'Y', while it should remain at 'Z' as long as no other button is clicked.This is a very basic problem, but I'm still asking. Is there a way to solve this easily? Do I need to start using booleans and if statements to fix this?
View 9 Repliesi have a problem with a rollover animation stopping at it's 'on' state on release. i have a movie clip that fades text up from 0% at keyframe 1 to 100% at keyframe 10 and back down to 0% at keyframe 19. i have an invisible button above this with the following:
[Code]...
the visible bit is to turn off the invisible button on release. the problem is that with the following code, all that happens is the movie plays out from 11 on release. i want it to stop at keyframe 10 (where it is).
I have the following code to control the rollOver, rollOut and release states from my buttons (btn_company, btn_products, btn_services and btn_enquiry):
Code:
for (var i in this) {
if (this[i]._name.substr(0, 4) == "btn_") {[code]...
I also have 4 movieclips (title_company, title_products, title_services and title_enquiry) which I also want to control with those buttons. When btn_company is pressed, title_company should go to frame 2, When after that btn_products is pressed title-products should go to frame 2 and title-company should go back to frame one.
I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 Repliesi'm trying to create some buttons as MCs that will load random imageMCs on release or rollover i think i am supposed to use math random in some form with MCs but i have no idea how to execute the script for that
View 1 RepliesI am creating a photography website, and I wanted to have captions below my photographs appear on the rollover of an info button, and disappear when its off. How do I do that? Also, I used an image array to load the images, and there are 18 images in the gallery, when there is a new image the caption has to change....
View 7 RepliesI started working actionscript 2 yesterday for a uni project. I was wondering if I can target a movie clip on a different frame from the scripted button. For instance would:
//
_root.my_mc._width
//
return defined if my_mc was on a different frame?
getting the following working:
Code:
stop();
import mx.transitions.Tween;
import mx.transitions.easing.*;
[code].....
What's supposed to happen is when you click button "go_0", the object "square" will animate moving down.
Whenever I am trying to do, the button rollover work, and put the dynamic text on top of it. The area outside the text is reacting to the rollover, but when I rollover on the text, I lost the rollover effect of the button under.The only way I have found to work around this, is to create another mc, invisible, on top and covering the button and create a script to activate the button rollover effect under... but is it the only way?
I don't have to do all this with static text, but the font react bad with rollovers or some other effects.
I'm trying to create reusable rollover button states with dynamic/changing text - any cleaver workaround for that?
View 1 RepliesI've got an issue - When one of my buttons is rolled over, I want text and a movieclip to appear. When the button is no longer rolled over, I want the text and movieclip to disappear. The way that I was going to do this was to have anchor_mc as an anchor, and upon rollover have the movieclip play from inside the anchor (as its at the exact X & Y that its needed at) and dynamic text appear.
[Code]...
On my stage, I have a movieclip, in the movieclip (movieclip A), I have a dynamic text box and {another movieclip with buttons in it} (movieclip B). How do I rollover a button in movieclip B so that the dynamic text box in movieclip A will show a word. For example, I rollover the 'News' button and the text box will show the word 'news' I have tried
_root.(variable name) = "News"
But it does not work...
I want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
When one of my buttons is rolled over, I want text and a movieclip to appear. When the button is no longer rolled over, I want the text and movieclip to disappear.The way that I was going to do this was to have anchor_mc as an anchor, and upon rollover have the movieclip play from inside the anchor (as its at the exact X & Y that its needed at) and dynamic text appear.
1) Is there an alternative way of doing the below, to avoid so many listeners?
2) Can the below functions be merged into one?I've tried merging them into one using IF statements, for example:
if(event.target.name == line1)
{
line_output.text = "This is a test made by the MonkeyTest that has previously messed up
And testing a new line";
gotoAndStop(2);
}
However this does not work, and gives an error.
3) I had to get the background to display by moving to the next frame. I could not work out how to get the textbox to appear at a specific XY, or how to get the textbox to disappear after a rollover. Is there a better way to do this, or is what I'm doing acceptable? (NOTE: Textbox is a Movieclip)
AS3 code is attached below.
Code:
import flash.events.MouseEvent;
stop();
[code]....
I create a button(MC) and want to duplicate it and easily change the text inside this button... basically I have an mc that acts as a button so inside the mc I have text that I added that animates on mouse rollover. Now I duplicate this mc in the library go into the mc and want to change the text, and when I do, the text in the original button also changes. This happens because the text is a Tween so it's using the same tween from the library for the new button. Is there a quick way to avoid this? I don't see anyway other than typing in the text again in the new button and animating it again.
View 6 RepliesI'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
i'm trying to use if statements but can't get this thing to work i want to check if another button is visible on release of a button to determine what action to be taken.the 'gotoAndPlay("firstscene",1)' is just there as an outcome, will be changed later. anyway this is the code i've got on the button i'm pressing. blobyellow2 is an instance of a button blobyellow is it because it's an instance that it's not working?
[Code]...
edit: sorry forgot to put what's wrong with the code. it acts as though the statement is correct no matter if it is or isn't.
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 RepliesIn Flex Mobile Project, Text Input shows blocks instead of showing arabic text. Labels are working fine with Arabic.
Is there any way to show Arabic text inside text input?
My code sample is
<fx:Script>
<![CDATA[
/* Import all the easing classes so its
[Code]....
Since, it is for flex mobile project, when I input any text in arabic, it shows separate characters. Arabic is a language that doesn't have separate characters. It should combine letters to form specific word.
- I have a dynamic text field inside a movieclip called 'newsbar'
- I have a mask called 'masker'
- I masked the movieclip newsbar as followed: newsbar.setMask (masker);
BUT now the text inside the dynamic text field only shows up half!To fill the dynamic text field I used this code: inhoud.text = "this is a text message";inhoud.autoSize = "right";
It controls a collection of 6 "slides". Each slide has a corresponding button, and it also slides every x seconds when the mouse is still. I'd like the buttons (b1 through b6) to change once they are pressed (to a similar image, just with a black dot in the center, which shows it is selected) and then return once another one is selected. I have a very minimal knowledge of actionscript
[Code]...
I want my button to go to a particular frame on release,show me the AS for this? I am using Flash MX for reference.
View 3 RepliesI want to disable my button on release and also want to change its appearance (may be like as "DOWN" status). I am using below code lines to disable it
on (release) {
mybutton.enabled = false;
}
But button goes back to "UP" status appearances.