I have a AS3 swf that has buttons linking to external html sites. When opened in Flash the links work fine, but when the swf is in a html page, the links don't work.Why the links don't work when in html?Is there something else I need to add to html code?
here is my script:
//LINKING TITLES AND LEAVESvar btn0URL:URLRequest = new URLRequest("http://www.adobe.com/");var btn1URL:URLRequest = new
[code].....
why the buttons in the flash banner I created in Flash CS4 work when I preview it in either Flash or HTML in the Flash CS4 program, but when I go to load it into a html document in Dreamweaver CS4 and preview it in a firefox or IE browser, the banner comes up fine, but the buttons this time will not work. The buttons are displayed with there animation and sound, but the links will not work. I have tried scripts in AS2 and AS3.
View 3 RepliesFollowing embed code is from [URL] but it doesn't work in Internet Explorer 8. Firefox no problems. Any recommendations for improvements?
[Code]....
UPDATE 2010-05-14: If I'm not mistaken HD.se uses Flowplayer and all those flasvars are for that. Perhaps someone here is good with Flowplayer? I've never used it myself.
I have an <mx:HTML/> component in my flex air app that shows a web page. The problem is, if the web page has a link on it and they click it, it does not take them to that page. Is there a way to allow this, or a work around? is there a way for the loaded webpage to send Flex info about events that occur in it?Here is my code:
<mx:HTML
id="html"
width="100%"
[code].......
I have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
I am having trouble with a job I am doing at the moment which has an mc with buttons within it. I want it so that when I roll over the mc it tweens from a small version to a larger version, and on this mc there are some buttons. At the moment I can get the mc to move but the buttons remain inactive and also the rollover states on the buttons don't work. I have attached a simpler version of what I am trying to do to this post.
View 3 RepliesI'm having problems with the flash buttons on the flash website i made for a client. or some reason the buttons in the top and bottom menu work on some people's computers but on some they don't. I don't know what to do, i had this code for all the buttons,
on (release) {
getURL("http://legaldepartment.ca/","_self");
}
and they worked on my computer but on others the buttons didn't work at all so i added this code to each button also
on(press) {
_root.getURL("http://legaldepartment.ca/","self");
}
and they still work on my computer and some other people's computers but still some they don't work on some people's computers.
I am using Flash CS4 with actionscript 2 to create an interacitve portfolio.I have 2 text buttons that work when I test them with "enable simple buttons." When I publish to IE these buttons won't work. I have created over 50 buttons using the same methods, they all work.
View 8 RepliesI'm trying to create an informative flash program on Mt. St. Helens about the dust cloud it created when it errupted. I have everything ready to go including the buttons and the pages the screen or next image it should take you to. I'm just stuck on how I get the buttons to actually take you to the next frame.
View 24 Repliesif i'm on the home page of this flash site, a button on the nav menu loads the correct scene the first time it's clicked, but if you nav to another scene and click the first one agin to return to it, nothing happens. why would a button behave one way on a scene and another way on another scene?
View 1 RepliesI have a swf file which needs to be activated on a page by an html link. i.e. when the link is clicked at the bottom of the page, the swf file should start playing elsewhere on the page.
View 4 RepliesI have the most weirdest problem with Flash Player and FlashDevelop (to be honest, dont know which one causes it), so let me explain. I have recently downloaded FlashDevelop and created an AS3 Project. When I compile the project, the files are generated in the bin folder. Now, when I navigate to the bin folder and open the index.html in Firefox and IE9, everything works fine. However, when I copy the bin folder somewhere else and then try to do the same, i can see the flash movie in Firefox but not IE9.
View 1 Repliesmy fullscreen script for fine in debuging, but when embedded in html it just flickers and nothing happens!
all 'allowFullScreen' parms is det to 'true' and it have never been a problem before, what could be wrong?
I'm creating a new website, and it has to be fairly dynamic. So, I load everything through one XML document. Now, depending on the content of a certain child in each menu, it loads a new page. There are going to be about 10 pages, to choose between.
So, I start coding, and all the content works fine, but my html tags won't work. I've activated the "render as html" button, in the textField parameter (the instance name is: "nyhedText"). I've also written, nyhedText.html = true; and nyhedText.htmlText = theContent - not the exact same names, but it is the same code.
My entire code for the page is:
[AS]// defines the variable model1_spacing
var model1_spacing = 0;
// defines the variable model1_count
var model1_count = 0;
[code]....
I have a flash file (main.fla) that contains an empty movie clip which has the action :loadMovie("myMovie.swf");When I test the movie in Flash it works fine.It also works fine when I have Flash closed & just open the (main.swf) file.And, of course, the loaded movie (myMovie.swf) plays fine too.HOWEVER, when I embed the main movie file (main.swf) into an HTML page, it will NOT load "myMovie.swf" like it's supposed to.Note: when I embed "myMovie.swf" into the HTML page, it works fine.
View 4 RepliesI've used flash like twice in my life, but I think I know how to make a button. I'm working on my artists portfolio online and I'm making it in flash. Basically it has buttons which link to photos and videos. There are 5 videos and 5 photographs. Now the problem is when you click on a button and watch a video buttons 1-3 of photos don't work. But the 4 and 5 buttons for photos work. It seems to only happen after you watch a video. The same actionscript is on all of them GotoandStop is the command I'm using for the photos and GotoandPlay for the videos.
View 3 RepliesI had all of my code working, then I moved all of my main movie timeline into a movie clip (body_mc)Main movie now has 1 frame.My body_mc has a navigation menu, one button is portfolio_bttn which takes you to that frame label. It persists through all frames of body_mc. This button works fine.I seem to have everything working except 4 buttons on the first frame of body_mc. They should all perform exactly the same function as portfolio_bttn. They exist only in frame 1.They work the first time you click one (any one).Navigate back to frame one of body_mc and all 4 buttons will no longer work. What am I doing wrong??here is my code which is in frame 1 of the main timeline
Code:
body_mc.portfolio_bttn.addEventListener(MouseEvent.CLICK, clickPortfolio);
function clickPortfolio(event:MouseEvent):void {
[code].....
[URL] the above site has small animated buttons that run through a sequence continuously until the user positions their mouse over the button then it launches into a 2nd sequence (all in the same movieclip). inside each movieclip there is the entire sequence and the first half is the bit that runs continuously - the second half is the mouse 'overstate'. the top layer has an invisible button and the action script:
[Code]...
I am a new comer to flash and I have been teaching myself actionscript 2.0 and I am now trying to move to action script 3.0 this seems a dumb question but for the life of me i can't figure out how to make my buttons work.i am trying to have the user click at button that connects to a movie clips and plays the movie, the movie stops then goes to the next frame of animation.
View 1 RepliesI am new to Flash and am having an issue with a project I'm working on. I have buttons that are in frame 1-150. I wrote the code in frame 1, but expanded the box to frame 150 so they will work. However latter in the project I want to be able to gotoAndStop frame 150, but when I do the buttons no longer work. I changed it to gotoAndStop frame 1 and they work. Can you not link to buttons in the middle of the "timeline".
View 1 RepliesI'm trying to convert an AS2 file over to AS3 and I can't get the buttons to work. They do not want to gotoAndStop at certain frames in specific scenes. In the following code, if you click on a button it works fine, but when you attemp to change to a new Scene, it breaks and both buttons won't work thereafter. I've tried everything for almost a day now and cannot get this to work and cannot find any reference to the problem. Is AS3 buttons not able to go to a new scene as it suggests in the Help files?:
View 17 Repliesi'm just learning Flash at a local college and my instruction is not being very helpful, so i'm hoping someone can help me. I need to insert a "start" button that will start the movie. I have the button on a layer called "startButton". I inserted another layer and called it "stopMovie" - this is where I add a keyframe on the 1st from and the last frame and then add a actionscript to stopmovie on both frames.
The problem I'm having is when I select the 1st frame of the layer where the button is localed, I go to the actionscript window/global fuction/timeline and then I want to select "play" but the system has it grayed out so I can't select it. My only option is "goto". But that doesn't work. All I want the funtion to do is start playing when I click on the start button.
I have a cascading/collapse flash menu.There are about 7 layers, each one of them a different page that slides and covers the other layers.for some reason, all the buttons on the bottom layer (layer 1 for instance) can be clicked on even when the 6 other layers are ontop of it with their own links and buttons. How can I make it so all my buttons don't shine through all the other layers. I can't slide the layer away to get ride of the buttons because it is still partially viewed when the other layers are ontop of it. I can't figure out why the buttons in layer one can be clicked in layer 2 when its on top of layer 1, or layer 3,4,5,6,7 when they are on top of layer 1-i assumed these layers would block out the buttons and links in the first layer(which is on the way bottom)
View 2 RepliesI'm designing a website for a Reiki/Spiritual advisor thingymebob and I have a menu on the left of my page of buttons and when I click a button it displays the contents of the button on the stage. Easy enough, so to speak, but the code I have written should send the viewer to a certain frame in the timeline where the tween begins.
When I play the swf and click the home button it works perfectly on the first page and if I go down the menu and click every other button in order they too all work fine, but as soon as I start clicking any other button randomly there is no tween effect and it seems to send me to the wrong page(!) plus straight to the clear text on the stage without any fading in tween. As though it has just gone to the last frame of the tween.
Here's the code below. I've asked the spiritual advisor for guidance and he sent me here, so please prove him right - ha ha!
stop();
myHome.addEventListener(MouseEvent.MOUSE_DOWN,
mouseDownHandler2);
function mouseDownHandler2(event:MouseEvent):void {
gotoAndPlay(281);
[code]....
I have a video that does play when I preview it in Flash, but does NOT play when I preview it in .html. I've gone over the publish settings, and I think they are correct. This was working fine awhile back, but isn't working now.
[URL]
I am a Flash novice and ran into a problem when my Flash generated html file opens in Safari (I'm designing on a Mac) but would not open on a recipient's computer - a PC using IE. I'm using CS5 and set up the file for actionscript 2.0. I know one needs to be sensitive to the various browsers being used, but how does one go about that and how can I begin to troubleshoot my current problem? I didn't use any special coding...I don't know action script yet.
View 3 RepliesI made these Flash movies( the 4 at the top of the page). The links don't work live, but did work as a stand alone while making.
View 7 RepliesI have an swf movie embedded into HTML (it's designed to work as a webpage) but for some reason my links to load external swf movies into a placeholder don't work when the main movie is embedded, but are fine in a flash player.
View 5 RepliesHow do you make html/css work for different browsers? My website looks good in internet explorer but it looks funny in firefox and chrome. What are the differences in the coding/css for all three? How do I fix this problem?[URL]..
View 2 Repliesi have this xml node being parsed into an html textfield in my flash movie...
HTML Code:
<ITEMS>
<![CDATA[<a href="http://www.yahoo.com">Yahoo</a>]]>
[code].....
