I am trying to make a drop down menu in my about section check out the pic that are attached for more information.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
[code].....
I am using this collapsible panel - link. Unfortunately, I have a problem using it with application states. I have a state where this panel is visible, when I switch to this state, this panel shows, when I click on it, it opens and its content shows. If I switch to another state (this panel is removed from display), and then switch back to the previous state, the collapsible panel stays open, but its content disappears. In other words, the collapsible panel's content doesn't persist through states. Anyone know what the problem is? Or is there another collapsible panel that can work around this issue?
View 2 RepliesDo you know any flex component with the functionality such as horizontally collapsible window or panel I found arc90, but it folds vertically.
View 1 RepliesI have a map in a panel.When maximizing the panel,the map remain the smaller size.How to make the map growing synchronizely with the Panel? When maximizing the Panel,I added Resize Effects.How to apply Resize effects on the Map when the extent of the map changing? It seems to me that I should dispatch extentChange event when maximizing the panel.
View 1 RepliesI'm just finished my first month of getting to grips with flex. All of my projects so far have be very small fixed sized containers with everything in the application resting in an absolute position.The next up and coming project is going to require a more dynamic layout and need some advice.The app will consist of 3 container (not sure what ones to use yet)
Container 1Will be the entire width of the app and a quater of its height.
Container 2Will be beneath Container 1. It will be half the width of the app and 3 quaters of its height.
Container 3 will be the same as container 2.
I want to be able to collapse each container and have the other containers respond to this.For example, I would like to collapse container 1 so that container 2 and 3 go from 3 quaters height to 100% height.
If I collapse container 2 conatainer 1 remains the same but container 3 goes from half thes apps width to 100% of the width.
I have many panels in my flex, they are freely draggable. If one is overlap of another, how do I control one to be on top?
View 5 RepliesI have several vertical collapsible menus that open just fine, but I need the code that closes a menu after another's been chosen.If you look at the attachment, you'll see what I mean. In the attachment, the gray 'help topics' nav is open. If I want to rollover and open the blue 'training' nav, I want the gray to close after blue's been selected.
View 1 RepliesI give my users the ability to create items. The Create item dialogs such as:
<s:Panel id="postitNoteCreatePanel"
horizontalCenter="0" verticalCenter="0"
...
How can I make panel draggable so that users can move it around the page so it doesn't block other items
My app has 3 categories of buttons, I want to have a tabbed panel I can use to switch between the 3 categories like in this example:
My app is a mobile app though so I can't use mx components. When I try searching for mobile tabbed navigation etc., I come up with only viewnavigator examples.
I'm looking for help putting together a some website navigation and wondered if i should be doing it action script or not (i'm assuming it should be). Basically i want a collapsible two tier vertical menu. So if you click on Menswear (for example), the rest of the menu buttons move down to reveal the Menswear sub categories (shirts, jeans etc).
View 1 RepliesI have just done the tutorial for the scrolling thunbnail panel but now I wish to make it continous is this easily done? I saw the xml perpetual scrolling thunbnail post in the forum, is this the same thing?
View 1 RepliesI wanted to make a menu that shows on hover, on click it will stay displaying on the screen, when clicked again it will disappear.
View 1 RepliesI am using Flashdevelop to build an Actionscript 3.0 game. It was originally a FlashIDE project but I decided to migrate the project to FlashDevelop. I also changed some asset and property names, as a result there were a lot of syntax error. The errors keep coming out in the Output Panel instead of Results Panel (is that normal) when compiled. I know that when I click errors in the Results Panel it will open and point the error in the Code Panel. I can't do that with errors in the Output Panel (I assume its normal). Is there something I can do to make the errors clickable ?
Even a simple error like this doesnt come out in the Results panel:
Loading configuration file H:�4 Noveline�3 GDGD03Folder (aaaa)TESTobjMeccatomedinaConfig.xml
H:FD(1)TESTsrcGame.as(75): col: 3 Error: Access of undefined property sssss.
sssss
^
Build halted with errors (fcsh).
(fcsh)
I just downloaded Flash CS5 for mac which installed without any errors. However, when I first launched the software I am getting the following error: The following panel layout is missing or could not be read: /users/rob/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Workspace/Essentials.xml The application will not have a correct layout. load one from Windows ->Workspace Once past this message none of the panels load.
View 3 RepliesI discovered this while doing some programmatic panel resizing:Components in a spark Panel will still be visible when their location is outside the physical Panel boundaries. This does not happen with the mx Panel.unning Flex 4.1 on Windows 7I tried putting mx and spark controls in the spark Panel, and they both appear outside of the boundaries. Note this doesn't happen with the mx Panel. What am I missing to make the spark behave like the mxSample Code:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[code].....
I have been trying to make a sound control panel in an SWF movie that toggles through about 4 different music tracks. I have not been able to get the if/else statements to work for the button. Could someone tell me what is wrong with this script(below)? 1-4 are the tracks in my library and I have made the export linkage for all them.
[Code]...
I want to create a panel docking to a pop up panel in my flex app, like Winamp's playlist window can dock to main window. but I didn't find any useful on docking in flex
I've traced the PopUpManager, but I didn't find any available interfaces or events about popup window's moving, I think it's design shouldn't be so bad.
Does anyone knows of a way to get the output panel in flash or the console panel in flex builder or flash builder, to format the "traces" with html or any thing else? for example:
trace( <b>brett</b> ); and to get that to appear in bold in the console window or the output window?
I've recently followed a tutorial to make a scrolling thumbnail panel that goes up when you down and down when you go up. est. This has worked perfectly will the script below...However Im looking to make an alteration to this so that when you are not on "stoke" the "panel" stops moving. Its currently set to not move until you role over on to it originally, however after that when you are not on the panel it continues to move when you stroll across the rest of the page miles away from the panel.
[Code]....
Do you know any collapsible flex container that can handle dynamic content that works when pre-collapsed? I tried the CollapsiblePanel component by Arc90 for Flex, but it did not work when pre-collapsed.If I have a VBox inside the panel, and I set the "collapsed" property of the CollapsiblePanel to true, the size of the CollapsiblePanel cannot be restored. It seems like this is what is happening:
The CollapsiblePanel's collapsed property is pre-set to true in the MXML markup.
The VBox auto-adjusts its height to 0 since the CollapsiblePanel is collapsed.
When the CollapsiblePanel's collapsed property changes to false (i.e., it is expanded by the user), the VBox does not expand itself because its parent's content area is 0. Therefore the CollapsiblePanel remains at the same height because its content's height is 0.
Note: This occurs only when the CollapsiblePanel is pre-collapsed, as seen in the markup below.I've already tried this (didn't work):
<containers:CollapsiblePanel minimize="pnl_minimize(event)"
restore="pnl_restore(event)" height="100%" width="100%" collapsed="true">
<mx:VBox width="100%" height="100%" verticalGap="0">[code]....
I'm having my first go at creating a custom component that lays out items in a grid. I have made a selection of inspectable properties accessed though getter/setter methods. Some of these parameters are dynamic, and change when the user resizes the component or changes another linked value. Is it possible to make the parameters panel update with the new values when a change takes place. Without this, the user will not have accurate feedback on the values stored in the component. Does anyone know if this is possible (or difinitely impossible)?
View 1 RepliesI have basic movie clips, On roll over, show arrows [NEXT, PREVIOUS] on movie clip [they then show other images inside movie clips]I can show arrows on roll over.But when i roll over the arrows the main ROLLOUT function gets called, the arrows hide. I've tried several flagging methods and have resulted in using a larger invisible border around the clip, rolling over that hides them.
View 1 RepliesWell I'm having some interface issues and i can't figure out how to cope with them. Firstly my "output" section is highlighting in lightblue(like the black arrows showing), it affects my application which is kinda annoying. img257.imageshack.us/i/libd.jpg Second thing is how to make "library panel" come back to right top section(so right scroll is more on the center?
View 0 RepliesWhen you open the Library panel and then my a new library so like you have 2 on the screen now pretty helpful if you want to open an external and have your current project open and drag and drop right. But here is the part I don't understand you have your 2 panels open now and every time you open your Library panel 2 pop up instead of one. God forbid if you every opened like 4 or 5 of these free floating Library panels I already have 3 going and there up there. is there a way to have all your open your Library panel with out having multiple un-needed Library opening along with the one you want?
View 1 RepliesThis has lost me already about 30 minutes of my work time. The panel decided to make itself extra tall, so I can't see the bottom of the panel. I see no way to vertically resize the panel. The only way that I think you can do that is to click and drag the bottom of the panel. The bottom of the panel is below the bottom of the screen even though I've dragged the panel up as high as it can go. How do I resize it?
View 4 RepliesI was looking around and I found this website. How did they do the flash on the accordion panel? So that part of the panel jumps to the other side (without the wiggle) and then the active panel shifts over to the right? [URL].
View 2 RepliesI am unable to view the Actions Panel window in a document I've already done a lot of work in. It worked previously - I created an Actions Layer and was able to add action script, however, when I try to open it back up to edit the action script I wrote, neither the F9 shortcut nor the Windows>Actions pulls up the Actions Panel. In fact, when I try either method, nothing happens.
View 3 RepliesI am drawing a cellular automaton simulation on a Flex Canvas. I alternate computing the state of the automaton with updating the graphics on the Panel. However, the updating of the Panel does not seem to be "keeping up" with the update of the CA state.
I'm wondering whether I am doing something wrong with my handling of the graphics code. The code is below. Sorry it's so lengthy, but I don't think the problem will happen with anything simpler (well, it probably will, but I'm not certain I want to take the time to find it).
[Code]...
var panel:Panel = new Panel();
panel.title = source.displayValue + "-" + data.displayValue;
panel.percentWidth = 100;
[Code]....
I Have the above code, looking at all the examples I canf ind online I have done everything correctly, yet, i still dont have my control bar
when inspection the number of children each element has in eclipse, the control bar numChildren property goes up, but the panel doesn't so its as if its not getting added.
just watched Lee Brimelow's how to create a scrolling panel of thumbnails. I have no questions regarding the panel, but, rather, how do I add a link to each image of the scroll; so, when the user clicks one, a popup or new page opens showing not the thumbnail he clicked, but the real size image?
View 1 Replies