I have a map in a panel.When maximizing the panel,the map remain the smaller size.How to make the map growing synchronizely with the Panel? When maximizing the Panel,I added Resize Effects.How to apply Resize effects on the Map when the extent of the map changing? It seems to me that I should dispatch extentChange event when maximizing the panel.
View 1 RepliesI discovered this while doing some programmatic panel resizing:Components in a spark Panel will still be visible when their location is outside the physical Panel boundaries. This does not happen with the mx Panel.unning Flex 4.1 on Windows 7I tried putting mx and spark controls in the spark Panel, and they both appear outside of the boundaries. Note this doesn't happen with the mx Panel. What am I missing to make the spark behave like the mxSample Code:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[code].....
I want to create a panel docking to a pop up panel in my flex app, like Winamp's playlist window can dock to main window. but I didn't find any useful on docking in flex
I've traced the PopUpManager, but I didn't find any available interfaces or events about popup window's moving, I think it's design shouldn't be so bad.
I just downloaded Flash CS5 for mac which installed without any errors. However, when I first launched the software I am getting the following error: The following panel layout is missing or could not be read: /users/rob/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Workspace/Essentials.xml The application will not have a correct layout. load one from Windows ->Workspace Once past this message none of the panels load.
View 3 RepliesDoes anyone knows of a way to get the output panel in flash or the console panel in flex builder or flash builder, to format the "traces" with html or any thing else? for example:
trace( <b>brett</b> ); and to get that to appear in bold in the console window or the output window?
I give my users the ability to create items. The Create item dialogs such as:
<s:Panel id="postitNoteCreatePanel"
horizontalCenter="0" verticalCenter="0"
...
How can I make panel draggable so that users can move it around the page so it doesn't block other items
My app has 3 categories of buttons, I want to have a tabbed panel I can use to switch between the 3 categories like in this example:
My app is a mobile app though so I can't use mx components. When I try searching for mobile tabbed navigation etc., I come up with only viewnavigator examples.
I have basic movie clips, On roll over, show arrows [NEXT, PREVIOUS] on movie clip [they then show other images inside movie clips]I can show arrows on roll over.But when i roll over the arrows the main ROLLOUT function gets called, the arrows hide. I've tried several flagging methods and have resulted in using a larger invisible border around the clip, rolling over that hides them.
View 1 RepliesI have many panels in my flex, they are freely draggable. If one is overlap of another, how do I control one to be on top?
View 5 RepliesI am trying to make a drop down menu in my about section check out the pic that are attached for more information.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
[code].....
I have just done the tutorial for the scrolling thunbnail panel but now I wish to make it continous is this easily done? I saw the xml perpetual scrolling thunbnail post in the forum, is this the same thing?
View 1 RepliesI am using Flashdevelop to build an Actionscript 3.0 game. It was originally a FlashIDE project but I decided to migrate the project to FlashDevelop. I also changed some asset and property names, as a result there were a lot of syntax error. The errors keep coming out in the Output Panel instead of Results Panel (is that normal) when compiled. I know that when I click errors in the Results Panel it will open and point the error in the Code Panel. I can't do that with errors in the Output Panel (I assume its normal). Is there something I can do to make the errors clickable ?
Even a simple error like this doesnt come out in the Results panel:
Loading configuration file H:�4 Noveline�3 GDGD03Folder (aaaa)TESTobjMeccatomedinaConfig.xml
H:FD(1)TESTsrcGame.as(75): col: 3 Error: Access of undefined property sssss.
sssss
^
Build halted with errors (fcsh).
(fcsh)
I have been trying to make a sound control panel in an SWF movie that toggles through about 4 different music tracks. I have not been able to get the if/else statements to work for the button. Could someone tell me what is wrong with this script(below)? 1-4 are the tracks in my library and I have made the export linkage for all them.
[Code]...
I've recently followed a tutorial to make a scrolling thumbnail panel that goes up when you down and down when you go up. est. This has worked perfectly will the script below...However Im looking to make an alteration to this so that when you are not on "stoke" the "panel" stops moving. Its currently set to not move until you role over on to it originally, however after that when you are not on the panel it continues to move when you stroll across the rest of the page miles away from the panel.
[Code]....
I am drawing a cellular automaton simulation on a Flex Canvas. I alternate computing the state of the automaton with updating the graphics on the Panel. However, the updating of the Panel does not seem to be "keeping up" with the update of the CA state.
I'm wondering whether I am doing something wrong with my handling of the graphics code. The code is below. Sorry it's so lengthy, but I don't think the problem will happen with anything simpler (well, it probably will, but I'm not certain I want to take the time to find it).
[Code]...
I'm having my first go at creating a custom component that lays out items in a grid. I have made a selection of inspectable properties accessed though getter/setter methods. Some of these parameters are dynamic, and change when the user resizes the component or changes another linked value. Is it possible to make the parameters panel update with the new values when a change takes place. Without this, the user will not have accurate feedback on the values stored in the component. Does anyone know if this is possible (or difinitely impossible)?
View 1 RepliesI'm trying to implement a collapsible TitleWindow popup by adding a handle to the top right corner of a Panel control. Unfortunately, the image that I add as the handle doesn't show up when the control is drawn. I can trigger a redraw by changing the source of the image, so apparently it's there, but it's somehow hidden. Is there a way to make this Image control visible to the user?Here's the code for the window:
package
{
import mx.containers.Panel;
[code]......
I want to increase the (height) size and change the color of a spark accordion header, similarly I want to change the color of a spark panel header. Can I do this through mxml properties and css or will I need to use a custom skin?
View 1 RepliesI have a web-application whose UI is implemented in GXT (ext GWT).Now I want to switch to Flex but as the application is so large that I cannot afford to start migrating the whole application at once.So I have decided to migrate slowly. So what I want is to bring up a Flex panel on the click of a GXT's button.Basically the idea is how to make Flex components listen to the events generated by GXT's component.
View 1 RepliesHow can I center the titleicon in a Flex 3 panel? The title is centered but the titleicon is way on the left side of the panel.
<mx:Panel
title="{myTitle}"
textAlign="center"
titleStyleName="panelTitle"
[code]...
Is there a way to remove the left+right+bottom border of a mx:Panel?
basically I want to have the right UI instead of the left one ( check the screenshot )
I know that the default spark Panel is able to do so, but I just need to use Flex 3.
Here is what I tried already :
padding (seems only changing the children)
borderStyle = none is removing the color of the header
i have a tabbed panel in the flex having various tabs and i m using this to get the selected tab index
private function handleInspectorAreaButtonClick(e:Event):void
{
var selectedIndex:int;
[code]....
I have a Hgroup that contains of four panels. Sometimes it happens then when users open it the panls have a unknown width even bigger than the window resolution.
<s:Scroller width="100%" height="100%" >
<s:Group width="100%" height="100%">
<s:VGroup gap="10" width="100%">
[Code]....
I have a page (below) that has a datagrid that lists "item"'s returned from an XML file (below) and when it loads it created a page in the viewstack for each item it finds (working) it also renders a page (below) inside each panel but i am having issues passing the data. Each page renders and loads but with the FIRST result of the XML data instead of each page having its own data they all have the same as the first page.
HomePage.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml"
width="100%" height="100%"
[Code].....
I was wondering how to distort a Flex object like Panel so it looks like a trapezoid?
View 2 RepliesAnd i have a requirement like, if i change the resolution of the computer, all the panel's in my applcition are auto setted to particular resolution by defaultly. but it should not happened like this.If resolution changed, the scrollBar comes into the picture for panelFor example, I have set the resolution in 1280*1024, so now the panel scrollBar not visible And as per my requirement, i need to check the resolution in 800*600 .But now the panel is automatically reset to this resolution.But i need a scroll bar for the panel when we change the resolution to 800*600.
View 1 RepliesI'm building a user login page and I want to go from titleWindow to Panel. I'm using the following function but it always takes me back to parentApplication.
how can I go to my panel and not to Application page?
I know that I'm using parentApplication but what should I use instead?
Here is a part of my code:
private function handleLogin(event:ResultEvent):void {
Alert.show("You have succesfully logged in.", "Information", Alert.OK, null, null, null, Alert.OK);
[Code]....
Here is what I have:
[Code].....
How can I center the mx:Image in the mx:Application?
It looks like the "cornerRadius" property of a Panel only changes the top corners and bottom if using a ControlBar. I'd like to specify a corner radius for each of the corners individual.
I know Degrafa can do this but I'd like to avoid if possible.
I would like to add an title Icon image to a Panel, but cant find the click event on that icon,
View 1 Replies