I have been using TweenLite for all of my easing. I was wondering what the code is for having a button inside a movieclip not active while the movieclip is tweening.Then when the movieclip does finish tweening the button then becomes active.
View 2 Repliesive made a simple game for a uni project, when you get game over a movieclip comes up and inside the movie clip there is a button to restart the game. how to i code the button inside the movieclip to gotoAndPlay to frame 1 on the main timeline?
[Code]...
I have a Button that is inside MovieClip1 which is inside MovieClip2; yet when i click the Button it doesn't dispatch Event.
View 5 RepliesI have a movieclip that I'm using as a button- the rollover state is on frame two, the up state is on frame one and I used actionscript to apply the different actions. All of the actions work fine normally, but about 25% of the time only part of the button is active. The mouse doesn't change to the hand symbol and the rollover/release effects don't work on most of the button, just on a small band around the perimeter of the button. Its not like it happens every time and there doesn't seem to be any consistency in what causes it.
View 1 RepliesHow can I get a button inside a movieclip link to a frame in another movieclip on the scene? I tried this code:
function gotoCenter(event:MouseEvent):void {
MovieClip(root).centermc.gotoAndPlay(2);
}
skruetest.addEventListener(MouseEvent.CLICK, gotoCenter);
..where "skruetest" is the button, "centermc" is the movieclip where I want to go to frame 2. I don�t get errors with this code, but nothing happens when I click the button. What can I do?
Can a button play a movieclip if it lives within another movieclip? Let me explain: Buttons in a map key ran route animations on the map. Code for button (accessed by selecting button and F9) ..reads : on (release) { gotoAndPlay("BusRoute_375");}
[Code]...
All layers and consequently all route movieClips that relate to the map as well as the stop codes for the individual route animations now reside within that MovieClip which sits on a new layer above the map key layer. However, the key buttons no longer run the route animations. What should be done so that when clicked they still play the route MovieClips. Its like the button code cant see the layers it once refered to, now that they are in a movieclip.
I have a button inside a movieclip, to which I would like to apply a rollover function. When rolled over, this button (inside MOVIECLIP 1) would make (MOVIECLIP 2) jump to second frame. I'm using Flash 8.This is turning onto a real headache for me, since i've searched every single forum and thread concerning this matter, and nothing seems to work.
View 7 RepliesI have a MovieClip in the library of my project, it has this code in the first frame of its timeline:[code]Then in the first frame of my main timeline, I have this:[code]
View 6 RepliesI'm doing a basic hitTestPoint which works fine when everything is placed on the root of the flash file. However it fails when all the elements are placed within a movieclip. I've a feeling the problem is due either to the registration of the objects changing once they are placed in the new movieclip symbol, the 'relativity/absolutness' of my referencing or the "hitTestPoint (dragable_object_mc.x, dragable_object_mc.y, true)" part of my code.I have two movieclips: dragable_object_mc - which you can pick up and dragstatic_crashzone_mc - If you drag the other object into this a collision is 'traced' in the output window(it works fine until I place the _mcs and code into a new _mc symbol)Incidentally if I use the 'hitTestObject' code on the root or within a movieclip, it works fine.[code]
View 3 RepliesI have a frame with a movieclip in it (named "theclip" in the library and has the instance name of "guy"). The movieclip has two frames with stops on them. The second frame inside this movieclip has the label "guy2"
Now back in the basic frame i also have a button (outside the guy movieclip) that i'd like when i press it it jumps to the "guy2" frame of the "guy" movieclip.
Code:
on (release) {
gotoAndPlay("guy2");
}
what do i add to the script that makes it refer to the movieclip? Is there a line like the _root or _parent and so on?
I'm using a MC(dock_mc) to works like a dock, and inside this dock, have some color buttons (like laranja_btn), but if i use the tween animation, the buttons don't work animore, if i remove the tween code, buttons back to work.
Code:
dock_mc.laranja_btn.onRollOver = function() {
dock_mc.cor_txt.text = "Laranja";
trace("Over");[code].......
I have a button inside another button which is inside a movieclip. *whew*I have it so that when you click on the movieclip, a dialog box pops up. I have two buttons on the dialog box, but for some reason you can't click on them and when you do, the dialog box just disappears. Here's a picture of what I'm talking about, so how do i get the "YES/NO" buttons to work? Oh, the buttons are not included in that Graphic
View 6 RepliesCan the button be called inside a movieclip?
View 6 RepliesI'm adding a MovieClip with with the following code in the main timeline:
var mcCiclo_01:mc_ciclo=new mc_ciclo;
function ciclo(event:MouseEvent):void{
addChild(mcCiclo_01);
}
I want to use a button inside that movieclip to link to an external web page. I was able to do that with dot notation if the movieclip was "fisically" in the main timeline but this way doesn't work.
I've got a movieClip with some Actionscript applied to it (to make it rotate, stop onMouseOver, and continue onMouseOut).Now, I basically want a button inside that movie clip - applied to the object that's spinning.Whenever I put the button inside the movieClip, Flash doesn't recognise it. According to the SWF, the button doesn't exist.So, how do I get a button in a movieClip that has Actionscript applied to it?Or, am I going about this the wrong way and there's an obvious answer that I'm missing?(My idea is, for those who watch Stargate, to have the inner chevron ring spin, for it to stop spinning onMouseOver and then have the user click a chevron
View 1 RepliesI'm trying to add an event listener to a button inside a movieclip. I have a movieclip called MainMenuGraphic that I get from the .fla library, and inside that movie clip is a button named btnNew. When btnNew is pressed the mouse event is supposed to trigger a handler that runs a trace, but I have not been able to get that trace to show in my output window. This is my code:
[Code]...
How can I get a button inside a movieclip link to a frame in another movieclip on the scene?
I tried this code:
function gotoCenter(event:MouseEvent):void {
MovieClip(root).centermc.gotoAndPlay(2);
}
skruetest.addEventListener(MouseEvent.CLICK, gotoCenter);
where "skruetest" is the button, "centermc" is the movieclip where I want to go to frame 2. I dont get errors with this code, but nothing happens when I click the button. What can I do?
I have made a sort of drop down menu of a movieclip. There are actually two, the first one named list_over_mc is only to detect when the mouse is in the area for when to drop down the menu (onRollOver) and the other one, list_mc, is holding the menu itself. The problem is that when the menu is down nothing happens when I click the button (now named knapp1_btn). I have tried with another but with the same sort of script (but placed outside of the movieclip list_over_mc) and that works so I'm guessing it is because the button is "over" the other movieclip.
View 3 RepliesWhat do I have to do to get the button to work? I view the swf and there is no active button.
I need the button inside the clip to be active.
I've basicly made a rollover menu which is nested inside a movieclip. the movieclip is put on 1 st. frame on the main timeline and I want the buttons inside the movie clip to take the user to a different frame on the main timeline, but no matter what I do it's just not working... here is some of he solutions i have tried to do:
function work1(e:Event)
{
//MovieClip(parent.parent).gotoAndStop("work1")
//gotoAndStop("work1")
[Code]....
I want that this button to the clicado being executes the function stop in one movie clip, I call this button stop2, it will go to only appear when dust button that this in timeline primary will be clicado, the button if flame drinks, that this in timeline primary, and another one calls stop, that also this in timeline primary, buttons xi (timeline primary) and paraMc (timeline inside of movieclip) the two has the function of for the animation of the other movie clip called " simbolo".
I want to know I eat to place action in the button paraMc that he is inside of movie clip for, remembering that the button paraMc only appears in the screen when the clica user in the button in the green color.I already tried to make: para.paraMc.addEventListener(MouseEvent.CLICK,simbolo); but it did not function, The square in the black color is movie clip that it contains a button of it inside, when clicar in the button of green color, the function reproduces movie clip in the gray color and movie clip in the black color that contains the button. the button in the red color calls the function " chega" , the button in the black color that is inside of movie clip also calls this function.
I have a movieclip called "cores" in my stage, and inside it a button called for example "bt01"
My fla loads a class called ApplicationMain, and I want to add a listener to the button bt01 into this ApplicationMain, like
bt01.addEventListener(MouseEvent.CLICK, DoSomething);
When I try to run my code I get this error:
Quote:
TypeError: Error #1009: Cannot access a property or method of.
I already tryed thinks like cores.bt01.addEventListener(MouseEvent.CLICK, DoSomething); but nothink works.
I crated a movie clip and inside a movie clip is one more movie clip . then i put a button on second movie clip
I want if i press the button goto scene 2 ?
How do you access a button from inside another movieclip?
I have:
_root.bg.B_Start on the stage with B_Start being the instance name of the button on frame 2 of the bg movieclip, which is on frame 2
My code is:
B_Start.onRelease = function() {
trace('ping');
};
I am trying to get ping to be traced when the button is pressed but nothing happens.
I have a movieClip on my main timeline, that I have scripted as follows:
Code:
//IT Button
this.IT_mc.onRollOver = function ()
{
[Code]....
Basically this just makes the movie clip fade to a different color when rolled over. This works fine, but I also have individual buttons inside the movieclip that don't work. They don't rollover, or activate. As if they weren't really buttons. How do I script the internal buttons to "getURL"? I have tried the standard "on(Release)" format of doing it, and that doesn't work.
I have a sound on/off button inside of a movie clip that loads prior to the 'home state' It has a sound loop running and can be turned on and off with the button. However, when you turn the sound button off and return to a button state that it was previously running under, the sound starts up again.
View 1 RepliesI have made a button inside a movieclip but I can�t get the button to take me to a frame outside the movieclip. When I use:
Code:
on (press) {
gotoAndStop(�Scene 1�, 2);
}
It still takes me to frame 2 inside the movieclip when Im trying to go back to the start scene.what type of script am I supposed to use in this case?
I have four movieclip buttons inside my swf file.I have to add function on each movieclip. I tried it is not working.example code swf_name.butn1_mvc.addEventListener(MouseEvent.Cli ck, functionname);
View 4 RepliesI have a movieclip inside the OVER on a button, right now I have an animation that causes the button's brightness increases from 0 to 10 over 24 frames and then come stops because of a stop (). I now intend to add an animation after stop () which gets the button's brightness goes back to 0 again when you no longer hold the mouse over the button. I would therefore like to make some kind of mouseOut event that allows Movieclip go to the next frame. I have tried to insert a target path but it seems that it can't reach the movie clip inside the button.
View 1 RepliesHow to unload a URLRequest(a new swf) done by a button which is inside a movieclip? tks a lot p.s - myloader.unload(); doesn't work
View 1 Replies