How do I turn on the strict mode in Flash Builder 4? --update I found something about "Preferences -> Actionscript 3 Settings", but there is no such option in Flash Builder preferences.
View 2 Replies
I'm just finding about Flash Professional.. What about Flash Builder?
View 1 RepliesI am following a code example in a book and have the final fla and as files, so I know the project works when fully coded.In the book, it tells me I can test the movie to make sure that it is working so far. When I do that, I get the error 1120: Access of undefined property.
The "property" is a component instance. If I take the example completed code and remove everything up to the point I am at, I receive the same errors, so I know it's not a spelling/syntax mistake.I have a feeling it is the Compiler in Strict Mode. But, when I change it to Standard Mode, then I get error 5001: The name of package 'com.foundastionAS3.ch12' does not reflect the location of this file. etc.
note:: attached is a file of the compiler when it gives me multiple 1120s.
I am currently using Flex (Flash Builder 4) and making web service connections to a Apache PHP Zend AMF server to retrieve data. This works great, but I am wondering what options are available for fault tolerance. I know I can probably set up a second server that the application would switch to in the event it is unable to reach the first server. I am also thinking about trying to give each individual machine some tolerance.
For example, if they at least had the ability to input data to the application, that would be a start. So if they click 'save' and it can not reach the server, it caches it or stores it to a local file until the server is back up. Though lack of being able to do data look-ups might be a big problem. Maybe there are already some libraries or something I can look at to do this?
Is there any way to set actionscript compiler in strict mode? I had to check the size of an array in a function.[code]I've lost a lot of time (lenght is an undefined property and if condition was not verified, so function went on... so bad!). Is there any way to force compiler to stop and warn me in this or similar cases?
View 3 RepliesIf I have a component that has some states defined, is there a way to make changes in design mode but not have it tied to a particular state? For example, if I have state1 and state2, any changes in design mode will be based on state1 or state2 (i.e. width.state1). I understand this is the direction Flex is going in but I'm transitioning from a Flex 3 app and right now I just want to make the change to width and not width.state1.
View 3 RepliesI'm struggling with the transition to AS3, specifically not being able to use parent like I used to. Aside from it making me a better coder, are there any good reasons to use strict mode? If I dont use it, are there any 'side effects' to my swf I should be aware of? Any input on parent and strict mode.
View 5 Replieswarning: unable to bind to property 'image' on class 'XML' (class is not an IEventDispatcher)Is there a way I can turn off this type of warning (but keep the others) as it is driving me crazy when I try to trace something else.
View 2 RepliesWhen i try to open my mxml script in design mode i'm always getting following message "This Component is base on VBox, which is not a visual component. Switch to source mode to edit it"
View 1 RepliesI have a set of users who run my application in non debug mode. Off late they have been reporting lot of issues. But I am not able to debug as there is no log file.Is it possuible in flex 3 to do logging in a file without running in debug version. I understand trace only works if we run application in debug version.
View 1 RepliesThere are three modes to link an SWC library to a flex application: "Merged into code", "External" and "RSL". I understand what is "RSL", but I don't understand what is "External"."RSL" works just fine for me, without any code changes. However, External doesn't work for me. Although my application starts, the classes in the SWC set to External are never found.What is the meaning of "External" if it is not "RSL" ? How do I make use of that ?
View 1 RepliesDoes anyone know if there is a way to make the new Package Explorer window in Flash Builder emulate Flex Builders 'Flex navigator' window?
Bottom line is I don't always need to peer into SWC's, and I don't like having a 'default package' automatically created for me. Not sure why the interface wasn't made simpler, allowing access to more power and complexity only if necessary. I want to focus on the code, not on how to navigate and use the bells and whistles in the coding environment.
I just upgraded to Flash Builder 4 (beta 2) from Flex Builder 3 which I have been using since it came out. Problem: All the projects that were in my workspace from Flex Builder 3 did not carry over into Flash Builder 4 (e.g. in the "Flex Navigator" view if FB3). Flash Builder 4 now uses the .FXP format to manage projects, but Flex Builder 3 did not. Is there an easy way to get all my projects back into Flash Builder 4?
View 2 RepliesI have an AIR project that I was working on Flash Builder 4.5 which now I'm trying to import to my updated Flash Builder 4.5.1 and it is prompting me to fix some paths before the import is completed. I'm kinda clueless what I should put in those fields.
[URL]
The project access a web server to retrieve data using JSON.
I am trying to migrate a project from Flash Builder 4.0 to Flash Builder 4.5. After Flash Builder prompts me to choose my new SDK, I choose 4.5, Then I get the following error:" error "The required skin state 'disabledWithPrompt' is missing".
View 1 RepliesI'll start off by saying I'm a newbie, just putting that out there. How do you make a turn by turn multiplayer flash game? I don't know if an engine is made in AS3, PHP, Javascript, or whatever,I made my game already, it's just that it isn'tmultiplayer yet. Basically, there are lines, and each player crosses out a number of lines, and the last player to cross out a line is the loser. I want it where one user crosses out some lines, then presses End Turn, then the other does their turn and then presses End Turn to allow the other player to move his cursor. But how can I get both players to see the same frame and only have one player have the ability to move the cursor during a turn? Is there some easily adaptable multiplayer engine for flash for newbies out there
View 2 RepliesI was writing some stuff today and i realized that variables inside a class are not constrained to the constructor or method scope. In my opinion this is utter lazynes. Scopes need to be fully enforced to force programmers to comply with correct OOP styles and organization.
to force yourslef to comply with the standards, when reffering to the consturctor always use the 'this' prefix and use 'var' for all temporary variables that should be inside the method scope.
I have this very strange problem on a big flex app where it would run fine with the debug swf if the user has debug flash installed but will have some disparities for people with standard version of flash.These disparities include:No pop upsloose all event catchingWeird positioning of a buttonI read somewhere that updatedisplaylist was handled differently ?For now i will try the export release way instead of the bin-debug swf, and to go back in the commits to see what was the turning point.
View 1 RepliesWhen setting up a source control repository for a Flex Builder workspace, what do you consider to be worth checking in? Do you exclude the workspace .metadata folder but keep the .project and other project specific files? Keep both? Throw away both? Is there a guideline you use to decide which is worth holding onto or do you do it out of practical experience?
View 2 Repliesi have a problem in flex fullscreen mode... that is my input box doesnot work in fullscreen mode.I could'nt able to type anything. and no keydown events are working.
View 1 RepliesFrom a video on AdobeTV, I tried to play with example empWeb (LiveCycle Data Services).In Flex Builder 3 (FB3) everything works fine. When I tried this on Flash Builder 4.0 Beta (FB4) it doesn't work. When I replaced original xmlns declarations (2009, spark, halo)with declarations from FB3 (2006) it works. Could you explain why?I'm using the default SDKs (Flex 3.2 for FB3 and Flex 4.0 for FB4). I investigated this (please see 3 source code examples). Source #1 works OK in FB3 and FB4, Source #2 gives a FB4 compilation error message: [code]
View 1 RepliesI have a Flex module created in Flash Builder 4 as a swf file. I am trying to load and run in within a Flash application. I can get the module loaded but I can not get the flash application to access any module functions. Here is how I load the module in Flash and the error I get. If I change the module to an application type swf then it loads and runs but now I have two applications on top of each other. I would like the loaded module swf to be able to have access the Flash stage object.
ReferenceError: Error #1069: Property application not found on MyModule__mx_core_FlexModuleFactory and there is no default value.
var loader:Loader = new Loader();
[code].....
Consider the following Flex code:
private function fullScreenHandler(evt:FullScreenEvent):void {
if (evt.fullScreen) {
viewstack.selectedIndex = 2;
[Code].....
I have a viewstack with two containing canvases. Canvas 1 is used when in normal mode and canvas 2 which is used when in full screen mode.
To properly resize the objectInViewStack2 I need to know how large the screen is when in full screen mode.
I just got CS5 master suite which includes Flash Builder 4 and Flash CS5 Pro. When I create a new AIR app in CS5 pro it says "AIR 2" but when I create a new AIR project in Flash Builder I do not see anything indicating that it is AIR 2 or 1.5?
Is there a way to tell which AIR runtime it is using?
I am using Flash Builder 4 on my MAC. Flex SDK 4.0. Flash Player 10.1.By executing this code below I only see the trace saying "start". And if I look at the Declaration of the ENTER_FRAME is see the error saying: "Source could not be found for flash.events.Event.Enter_Frame in...."But the playerglobal.swc source is there, and I have tried different SDK versions and FP versions.If this is a Flash Builder problem I can not be the only one having this issue?[code]
View 1 RepliesCan someone explaine the deference between Flash CS5 and Flash Builder 4 and Flex CS5?
View 1 RepliesI'm setting up a build system for a Flash Builder 4 (Flex 4) based project; and I'm struggling to get a setup that compiles in the IDE the same as it does from the command line on the build server.I come from a C# background; and my expectation is that I'll be able to create a "solution" with a collection of "projects" that I can compile from the IDE, or from the command line on the build server.The best I've managed sofar is 2 separate build "scripts", a custom ant script for the build server, and the default Flash Builder IDE config based on a workspace; but this is making my DRY daemons jump around in fury.
View 1 Repliesi'm slowly making my way over to Flash Builder from doing all of my programming in Flash Professional.
it's not an easy transition since things i've taken for granted in Flash Professional are completely different in Flash Builder.
first, FB4 will always automatically convert my function (even pasted functions) to look like this:
[Code]...
I have some UI components (Toolbars and buttons) that I drew in Flash and was wondering how I can use it in Flex via the Flash Builder?
View 1 RepliesI've been working in Flash BUilder 4.0. I installed Flash Builder 4.5, and switched to the workspace I had used for 4.0. Then we were told to go back to 4.0, and now I can't run or debug. I can build, but then I have to double click on the .html file to run. Right clicking doesn't bring up run or debug, and the run and debug icons are not in my toolbar.
View 3 Replies
