Actionscript 3 :: Make Flash Builder Package Explorer Emulate Flex Builder's Navigator Window?
Apr 21, 2010
Does anyone know if there is a way to make the new Package Explorer window in Flash Builder emulate Flex Builders 'Flex navigator' window?
Bottom line is I don't always need to peer into SWC's, and I don't like having a 'default package' automatically created for me. Not sure why the interface wasn't made simpler, allowing access to more power and complexity only if necessary. I want to focus on the code, not on how to navigate and use the bells and whistles in the coding environment.
View 1 Replies
Similar Posts:
Nov 9, 2011
I can use:
navigator.pushView
in ViewNavigatorApplication, but can't use it in TabbedViewNavigatorApplication?
Is there a replacement for navigator.pushView in TabbedViewNavigatorApplication?
View 1 Replies
Dec 20, 2010
I am using Flash Builder 4 and need a VideoDisplay component that works with Cue Points. The newer version of theOSMF classes that Flex's VideoDisplay are based on handles this already. The idea is to roll my own VideoDisplay component rather than monkey patch the existing one. To do this, I have created a project with the newer version of the OSMF classes, and another project with which I would build the new VideoDisplay, in a separate package name.
The issue is that since the Flex 4.1 SDK contains the majority of the OSMF classes with their original package names, a statement such as import org.osmf.media.MediaPlayer; references the class located at
[Code]...
View 2 Replies
Jun 30, 2011
I have an Air Application which uses mx:HTML to show a html Page. This html page is located in my bin-debug and as long as i start my application out of FB it works fine.
In Project -> Properties -> Flex Build Packaging -> Package Content the test.html is selected
When I build the project by Project-> Export Release Build the HTML file is not included in the Air Package and so cannot be shown.
View 1 Replies
Dec 14, 2011
The window for Flash Builder's mobile device emulator (in AIR) seems to be a bit too tall for a resolution running 1280x800. Is there a way to make it run smaller? 1280x800 is the highest resolution set-able on the laptop being used to develop for it.
View 2 Replies
Jul 11, 2009
How do I configure an ActionScript Project in Flex Builder 3 Pro so that I can compile an ActionScript class that is part of a package into a swf. For example, the class that I want to compile to swf is:
package utils {
import flash.display.Sprite;
public class Tool extends Sprite {[code]....
RootASProject is being produced by one developer, subASProject1 and subSubASProject1a by another developer, utils.Tool by yet another person.This directory structure enables each person to independently build modules and other resources, and quickly test the entire product.It is also important to note that these resources are loaded at runtime.So, class definitions must be fully qualified. For example, Tool.swf contains/defines "utils.Tool" not "Tool".
Developing with just the Flash IDE, this directory structure is not a problem. We create a Tool.fla and assign utils.Tool as it's Document Class then in the Flash IDE's Publish Setting, we set the class path to be NOT the current directory (.), but instead the RootASProject directory. If it were set to the current directory, the error would be: A file found in a source-path must have the same package structure '', as the definition's package, 'utils'. ToolTool.as. We're familiar with this error message and so I recognize that the Flex IDE is by default looking in the current directory for a subfolder, utils, to match the packaged class.
In the Flex IDE, I can add the utils parent, RootASProject, as an additional source path, but I do not know how to stop flex from looking in the current directory first.Using an ant build file, I can set the source path to RootASProject and the mxmlc is able to build utils/Tool.swf just fine. Apparently, it uses just the source paths passed to it, and does not automatically look for utils in the current directory.
View 2 Replies
Jul 12, 2011
So the issue is that whenever I run the flash movie, the display in the browser (Chrome) ends up being like 30% larger than the browser is when fully maximized. In reality, it should be running in a 800x800px environment. I've tried messing with the stage size and doing things like setting it to FULL_SCREEN and NORMAL and that had no effect. However, attempting to compile the project through the command line with the mxmcl (although it gives different errors atm) show me that the window is properly sized at 800x800px, so it is obvious that the flash builder is the one that resizes it.
View 2 Replies
Oct 6, 2009
I just upgraded to Flash Builder 4 (beta 2) from Flex Builder 3 which I have been using since it came out. Problem: All the projects that were in my workspace from Flex Builder 3 did not carry over into Flash Builder 4 (e.g. in the "Flex Navigator" view if FB3). Flash Builder 4 now uses the .FXP format to manage projects, but Flex Builder 3 did not. Is there an easy way to get all my projects back into Flash Builder 4?
View 2 Replies
Dec 15, 2011
In my flex 3.5 project, I have a class (MyItem) extending Canvas. In this I have declared a private variable named itemInfo which is type of ItemInfo (which is another subclass of Canvas).
I wrote code to hide/show the iteminfo when the mouse is over/out of MyItem. I am not getting any error but it is not showing the itemInfo as expected, when debugged the code, surprisingly the variables tab in debug window does not have the variable itemInfo at all.
I have declared a dummy:int variable and it is also not visible.
View 2 Replies
Nov 28, 2011
I am trying to migrate a project from Flash Builder 4.0 to Flash Builder 4.5. After Flash Builder prompts me to choose my new SDK, I choose 4.5, Then I get the following error:" error "The required skin state 'disabledWithPrompt' is missing".
View 1 Replies
Jun 15, 2011
I am trying to setup two variables:
var xmlURLLoader:URLLoader = new URLLoader();
var xmlURLRequest:URLRequest = new URLRequest();
I am taking some old AS code and trying to plug it into Flash Builder. I am getting a "Type not found."warning with those variable declarations. Does anyone know which package to import?
View 1 Replies
Jun 27, 2011
I have an AIR project that I was working on Flash Builder 4.5 which now I'm trying to import to my updated Flash Builder 4.5.1 and it is prompting me to fix some paths before the import is completed. I'm kinda clueless what I should put in those fields.
[URL]
The project access a web server to retrieve data using JSON.
View 2 Replies
Jun 6, 2011
I am developing a web app using Flash Builder. A graphic designer came up with some designs for the app but I have never converted a photoshop document into a Flex skin or for that matter made a custom Flex skin by any means. Is it possible to take the photoshop work and put it into Flash or something? What exactly goes into Flex skins? If I were to contact this out, how much am I looking to spend on a 8 page app?
View 1 Replies
Mar 15, 2011
I recently installed Adobe Flash Builder 4 in standalone mode on a new installation of Windows 7 x64.I can load and build an existing Flex 4.1 project I have been working on, but when I go to run the project in the browser (Firefox 3.6.15), I get:'Launching BensApp' has encountered a problem. An internal error occurred during: 'Launching BensApp'
Clicking the Details >> button reveals:
java.lang.NullPointerException
My project is creating the SWF and container HTML page as expected, but fails to load the browser.
View 2 Replies
May 31, 2010
I want to make a diagram with either flash CS4 or flex builder 3, don't know with one would be the best for the job.More about the task:I want to send in values external to the swf file.The swf-file takes the vaules and makes a diagram of it using x and y values.
View 1 Replies
May 10, 2011
How can I make a word file (.doc) from flash builder (air application)? Is there any library to do that?
View 1 Replies
Jan 10, 2012
I am making a quiz application for mobile.The questions are comming from xml. How can i make multiline Radiobuttons? I tried to do a skinclass but it didn't worked.In this code i make the RadioButtons.
[Code].....
View 1 Replies
Jun 3, 2011
If I have a component that has some states defined, is there a way to make changes in design mode but not have it tied to a particular state? For example, if I have state1 and state2, any changes in design mode will be based on state1 or state2 (i.e. width.state1). I understand this is the direction Flex is going in but I'm transitioning from a Flex 3 app and right now I just want to make the change to width and not width.state1.
View 3 Replies
May 6, 2010
I realize this is probably a simple question but my google-fu is failing me. I would like to get a windows explorer like file browser to popup when I click a button to select images to upload to my AIR application.However I cannot find a component that handles File exploring. Does anyone know what to use?
View 1 Replies
Nov 10, 2009
Is there any way to get Flex Builder to connect to an existing browser session running Flash Player Debugger? I can connect to FDB like this, but with Builder I need to click Debug and rush to close the newly opened browser window before it loads the Flash file and then go back to the session I want to connect and right click it to start the debugger.
Unfortunately this is not very reliable as I can't always beat the window opening, requiring several attempts before being able to connect to the session I am interested in. If I could just tell Builder 'Start debugging' and then have it wait for the connection, I could now calmly go over to the browser, right click, hit debug, provide the IP and voila. This would allow me to inspect variables on a hard to replicate bug on a session running on a tester's computer.
View 3 Replies
Apr 16, 2010
Adobe Flash Builder: How to make a function to play video starting from one second and ending in another? So I havein MXML simple video player tag. I need some function to play that video from second X to second Y and pause it. How to do such thing?BTW: we asume file is embeded into SWF.
View 1 Replies
Nov 14, 2010
So yahoo astra has grate compohent for saving inputed data. They show examples of how to use it. But I had not found one capable to solve my current problem. For example user inputed his name. It is saved, but when he comes again he always needs to input at least first latter of his name. so I wonder - how to make Yahoo astra autocompletemanager component to pop up last inputed into it value on application creation complete?
[Code]...
View 1 Replies
May 25, 2010
When setting up a source control repository for a Flex Builder workspace, what do you consider to be worth checking in? Do you exclude the workspace .metadata folder but keep the .project and other project specific files? Keep both? Throw away both? Is there a guideline you use to decide which is worth holding onto or do you do it out of practical experience?
View 2 Replies
Aug 9, 2011
I could swear at one point I had found an option to have the package explorer show paths of the files, but, I can not find this option anywhere.
Did I dream this one up?
View 1 Replies
Dec 4, 2010
I'm a programmer and I've learn some basic knowledge about Flash Builder. What I can do with it now is to use the components and somethings override the redraw function to design my own components. However, I find that is a inefficient way and I seems to complex to achieve the animation with only codes. Are there some way to develop with Flash Builder and Flash CS? And how to make animation without complex code? Could you recommend some books for me?
View 1 Replies
Aug 31, 2009
Is it possible to make the content assist in Flex Builder to pop up as soon as I start typing and not just after pressing CTRL+SPACE? It does pop up by itself after a '.' (foo.) or a ':' (var foo:). But to get a list of available variables and methods I have to press CTRL+SPACE.
View 4 Replies
Jun 24, 2011
I am developing an application for andriod and iphone in the Adobe Flash Builder,how can i make a button that when is pressed the phone(doesnt matter which phone) forwards the number to the phones dialer or makes it VOIP call
View 1 Replies
Aug 17, 2010
I am adding a tab navigator to a title window here. Once the title window is closed, it can be reopened using the button.But on opening the title window second time in this manner ,the content of the children of the Tab navigator(here, a label) is not visible.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="init()"
<mx:TabNavigator x="68" y="68" width="200" height="200" id="tabNavig" historyManagementEnabled="false">[code]....
View 1 Replies
Feb 7, 2011
I have my main application, which contains several instances of a component that create a grid of photos belonging to a certain category. (the grids, and the photos are created dynamically with a loop).
I'd like to be able to click a photo to run a function that loads the large version of the photo into a separate element that is contained in the main application. So I created a Photo component in my main application, but how, using actionscript, do I change the 'currentphoto' variable in my main application from inside the tileview component?
Alternately I could put the function in the main application (probably more logical in the long run), but how would I call it from the child component?
View 1 Replies
Jun 14, 2010
I just got CS5 master suite which includes Flash Builder 4 and Flash CS5 Pro. When I create a new AIR app in CS5 pro it says "AIR 2" but when I create a new AIR project in Flash Builder I do not see anything indicating that it is AIR 2 or 1.5?
Is there a way to tell which AIR runtime it is using?
View 2 Replies
