Applying Ease To ONE Motion, Not All?
Nov 10, 2009
on a project in Flash CS4 for Windows. I have an object on a layer that moves separately at different times of the animation (all one large motion tween). I'm attempting to apply an ease to just one leg of that motion, but instead, when I choose an ease setting in the motion editor, the ease is applied to the entire tween (so it affects the stationary frames too!). Is there a way to apply an ease to a single span of motion instead of the entire motion tween?Alternatively (if it's not possible), is there an easy workflow for breaking-up a motion tween in to separate motion tweens while maintaining the position of the object in between the motion tweens? (I don't want to use the frame-by-frame animation conversion option I've seen.)
View 1 Replies
Similar Posts:
Aug 4, 2009
I have a motion tweened layer that uses 445 frames. However the actual property change occurs from frames 1 - 360. After fr 360, there are no property changes. When I create a simple ease - ease out, set at 100. This ease shows that it takes 445. When I apply the ease to my properties (x and y specifically). The ease appears to be applied and the movement stops at fr 223. So between 223 and 360 there is no movement. The dash line of the ease in the properties motion editor goes diagonally to 223 then flattens out at the top - indicating no movement. How do I get the ease to apply to all 360 frames, and slowing down up to 360, rather than earlier than that?
View 1 Replies
Apr 23, 2010
I really like the motion editor in CS4. A lot is easier than before, particularly working with ease. But I wounder how you use the custom curve when having a complicated motion with a lot of keyframes. In programs like AE it's easy to select a key and tell if it's going to be a easy in/out or both, and then I select next key and tell how that key should ease. In Flash CS4 I allways get a easy curve that range the entire tween. Is the workflow to brake everything apart so you tween every single motion, or is it another way doing it?
View 1 Replies
Apr 1, 2011
I have created a motion tween in Flash and want to slow the speed of the tween towards the end, so my image doesnt stop suddenly. I applied a slow ease which was working previously but has now decided to stop working and I cannot get it to work again. The strange thing is when I change the ease value from 100 to -100, so the ease is applied to the start of the motion, that works fine, but when I change it back to 100 the ease wont apply to the end of the motion
View 3 Replies
Sep 21, 2011
I have encountered an interesting situation, I would like to simulate a ball thrown by a goalkeeper from top. Ball is going to move from right to left, it is small at the beginning, getting bigger at the half, because it gains height, and small again at the end. The scenario is this. And I do not want to use any actionscript code because of the performance loss caused by the event listeners.
How can I simulate two different kinds of tween (horizontal move is without ease and vertical move is with easeOut and easeIn) in the design environment of Flash cs5.5
By the way, I have already tried using actionscript code however, because there so many concurrent event, a little lag is occured at the beginning of each tween start.
View 1 Replies
Oct 3, 2011
I was given the following code to establish a motion tween for five different movie clips. The code also ensures that a glow filter is applied at 5-second intervals. My user has now requested that the code be changed to ensure the following occurs:
Once glow filter has been applied to the darkBlue_mc and when the glow filter is beginning to be applied to the red_mc, then the glow needs to disappear from the darkBlue_mc, and so on through all five movie clips, so only the current movie clip should have the glow filter shown. When the glow filter is applied to the last movie clip, which is lightBlue_mc, then he wants all movie clips to have the glow filter applied after a five second delay.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
import flash.filters.GlowFilter;
var textCount:int = 0;
[Code] .....
View 2 Replies
Aug 20, 2004
i wanna make an object ease after another object that is easing... like a motion trail. but the objects just go to the corner of the screen....and won't ease after each other.
View 10 Replies
Nov 4, 2009
Is there a way to increase the ease in and ease out effect? It will only let you choose -100 to 100, and I've messed around with the length of the tween, and the FPS of the movie, but I want the acceleration to be greater.
View 7 Replies
Aug 5, 2009
I have a simple motion tween from fr 1 - 52 (x and y property movement only). I create a custom ease - standard 100 ease in and then a 100 ease out. When this ease is applied to the motion, the ease "happens" after fr 52. So the object does not stop until fr 63 (eased out at 63. How can I get the ease to match / ease out to the last keyframe on 52, rather than 63??? See the attached image of the motion editor.
View 1 Replies
Sep 20, 2009
I'm trying to get a prototype working for a website.
What I would like to do is have five buttons at the bottom of my stage, and when I click them, an image fades AND eases in. I have this part finished so far, but the issue is that when I click another button, I want the previous image to fade/ease out before the next one fades/eases in.
Here is my code:
Code: Select all
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[Code].....
View 4 Replies
Mar 8, 2010
If I perform a motion tween along a curved path, Flash CS4 does not allow to change the curves to "corner point" or "linear" in the motion editor. URL...
View 2 Replies
Oct 10, 2010
I have been searching far and wide for a solution on how to offer slow motion and fast motion options for users that upload video to my webstie. There is an implementation on Google Video that has exactly what I am looking for: the option to speed up or slow down the video and continue to play the audio. The screenshot is below. I know that Flowplayer has an option to slow down or speed up video when implemented with Wowza server. However, when using that approach, there is no sound.
I have also seen the option from Enounce called MySpeed that allows video to be slowed or quickened, but this requires a browser plugin which is too much of a barrier for our users. How does Google do it? How can you add an option to a flash player to slow down or speed up video?Here is a screen shot. You can see the option to change the speed of the video to 1.5x. It also has options to go to 0.5x, 1.25x, 1.5x, 1.75x, 2.0x, 2.5x, and 3.0x.
View 1 Replies
Oct 27, 2010
I would like to create a polygon that changes its shape (circle, trapezium, square, rectangle, triangle) based on specific buttons that the user clicks? An existing shape has to be able to morph into all the others. For instance, the trapezium has to morph to a square, circle, rectangle or triangle.
If I were to create each transition manually, I would end up with 5x4=20 scenes. Is there a way that I can just assign each shape to its own frame, and deploy actionscript to set in motion the transitions from one frame to the 4 other possible frames? I am very grateful to anyone to just point me in the right direction,
View 3 Replies
Aug 21, 2009
How do I add motion blur to a motion tween?
View 2 Replies
Dec 6, 2009
im writing AS3 under linux and as such do not have access to ANY of the fl.* packages, including tweens, motions, special animations and components. I can only use Math.* and XY Grid Coordinates to calculate motion manually.
I can make movement of sprites fairly easily on a coordinate system, but this restricts how the path can go. Usualy only an up,down,left,right movements for the simplest math. I suppose this could be expanded to move in more varied directions but its not quite what im looking for.
I would like to be able to draw an invisible line that a shape can follow. Then it can have curves or bends in it without problem. I want to then start the sprite at the 1st pixel of the line and set its next coorinate based on where the line is at, but at 10px down it (and so on) till it reaches the end of the line. Is it possible because I cant think of a way? Are there any other good PureAs3 motion tutorials around?
View 2 Replies
Jul 27, 2009
I'm getting the following error: Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol. I don't have any ungrouped shapes (it's all text), each layer has 5 instances of only one symbol (keyframes), no objects are grouped and text is all static text.
When watching the animation, the first word (web) looks fine, on the second word (design) the tween fails on the last couple of frames of that clip (the blur filter disappears), the third word (and) is OK, and on the forth word (development) the blur filter is not applied to the last 16 frames of that clip.I broke each animation into its own MC thinking that was causing the issue, but that didn't fix anything.
View 5 Replies
Aug 28, 2009
I have been wondering how to do advanced ease in and out between three frames. What I have been trying to figure out, is when using the new tween function in cs4. So what I do is i make a simple animation of a ball going from point a to point b, and apply a ease in and ease out.
now with that in place the animation works great.now if i want to make the ball go to point c with and ease in and ease out. the ease in and ease out is now applied to the whole animation intead of being able to have 2 seperate ease in and ease out for animation from point a to point b, then animation from point b to point c.
is there anyway to make it so that i can multiple ease in and ease out for these frames?
View 1 Replies
May 26, 2009
i have a mapMC on the stage and 6 buttons. i need to be able to make the buttons move the mapMC to specified coordinates. the coordinates are set and will never change. i also need an easing from one location to the next. i guess i'll go ahead and throw in a bonus question for any of you aces out there. lets say location "A" is at x=200, y=400. i would like the mapMC to get there and scale 120%. so a button that gets pressed will go to its coordinates and scale acordingly. i can see that this could be script heavy, but for some reason not too difficult.
View 1 Replies
Jun 3, 2009
adjust ease of slide
View 1 Replies
Nov 10, 2010
I've been using animation applications for about 20 years now and, for whatever reason, Flash CS5's ease in/out feature has got me stumped.
I have a simple text Movieclip that comes from the left, off stage, and moves to the right onto the stage and stops. I want to ease it so it slows down to a stop.
I'm using Flash CS5 with the new tween.
When I click on the tween in the timeline, the ease property in the Properties Inspector doesn't give me what I want. If I put 100, it comes in and stops hard. If I give it a -100, it slowly accelerates to full speed and then stops suddenly.
I've read the tutorial for the new Motion Editor in Flash and it doesn't work like any other motion editor I've used, including Adobe's own After Effects. Normally, you would just click on the graph's line and then curve it with a pen tool or right-click on select bezier...
View 5 Replies
Mar 12, 2010
I'm creating a thermometer with the mercury animated as donations come in. I haven't touched flash in a long time, so be gentle.
How can I change the code below so the animation is faster without increasing the framerate?
var maxMercuryHeight = 192; // Mercury height at 100%
var currentDonations = 80; // Percentage of donations taken
var currentHeight = (currentDonations / 100) * maxMercuryHeight;
[Code]....
How can I make the animation ease out so it starts fast and slows down at the end?
View 1 Replies
Jul 4, 2006
Im trying to get this code to work ... The idea is the when I press the "w" key, the MC will move up Y_axis and when I release the "w" key the MC eases a little bit further
[Code]...
View 5 Replies
Sep 12, 2004
i'm using the following code to ease mc's
PHP Code:
MovieClip.prototype.easingY = function(toY){ this.onEnterFrame = function(){ this._y -= (this._y-toY)/3; if(this._y > toY-4 && this._y < toY+4){ this._y = toY; delete this.onEnterFrame } } }
now i have to provide a Y position to move to...is it possible to change this code so that instead of providing a Y position i give it a amount of pixels to move (up/down)? ex. move 100 pixels UP from current y or move 222 pixels down..
View 1 Replies
Apr 22, 2010
I was wondering if theres a way to apply ease in and ease out both to a single tween..as i want the tween to start slowly than gain normal speed and then again stop smoothly.
View 2 Replies
Apr 21, 2009
Im trying to figure out how to load an mc from the library with a button. the button is working but not the ease..[code]
View 2 Replies
Jun 3, 2011
How do I ease the photo transition?[code]
View 5 Replies
Feb 24, 2011
I've set a hover on and hover off tween to a certain element in flash, where you hover over an element, and an informational window slides in off the bottom, and when you hover off it slides back. Hover, when I hover off before the hover on animation is over, the given object jumps to the end of the first animation and back. How do I make the animation ease in and out when someone hovers over something?
function initialPlacement() {
block1.x = (-814);
block1.y = (stage.stageHeight - 100);
} initialPlacement();
tension.addEventListener(MouseEvent.ROLL_OVER,hover1);
[Code] .....
View 1 Replies
Jun 24, 2009
I know how to ease objects from one position to another etc, but how do you make it ease position as well as transparency? so it fades in while moving to it's new position?
Code:
var WelTween:Tween = new Tween(welcome, "x", Strong.easeOut, CurMarkXPosWel, 277, 2, true)
is there a way to add like 0% opacity to 100% opacity in the same line of code or do you do seperate?
View 2 Replies
Feb 10, 2010
I have a background image that moves left and right, continuously giving a 360 Degrees appearance. My control buttons work fine but what I want to do is ease in to the movement. Here is a LINK to my demo. When you roll over the arrows is simply starts and stops. I'd like to ease the starts and stops
Right Arrow
Code:
on (rollOver) {
_root.theclip2.gotoAndPlay(_root.theclip2._currentframe);
} on (rollOut) {
_root.theclip2.stop();
[Code] .....
View 9 Replies
Nov 25, 2010
I have this code that drags and drops an object but I'd like to add a smooth (ease) movement when releasing the mouse button (MOUSE_UP) .I thought I might use Caurina tween or Grant's but I can't find a way to conect it to my drag.
[flash=]
import flash.display.MovieClip;
import flash.events.MouseEvent;[code]...........
View 2 Replies
