Apply Ease In And Out Both To A Single Tween?
Apr 22, 2010I was wondering if theres a way to apply ease in and ease out both to a single tween..as i want the tween to start slowly than gain normal speed and then again stop smoothly.
View 2 Replies
Similar Posts:
Ease Control In Motion Tween
Aug 4, 2009I have a motion tweened layer that uses 445 frames. However the actual property change occurs from frames 1 - 360. After fr 360, there are no property changes. When I create a simple ease - ease out, set at 100. This ease shows that it takes 445. When I apply the ease to my properties (x and y specifically). The ease appears to be applied and the movement stops at fr 223. So between 223 and 360 there is no movement. The dash line of the ease in the properties motion editor goes diagonally to 223 then flattens out at the top - indicating no movement. How do I get the ease to apply to all 360 frames, and slowing down up to 360, rather than earlier than that?
View 1 RepliesActionScript 3 :: How To Make Tween Ease In And Out
Feb 24, 2011I've set a hover on and hover off tween to a certain element in flash, where you hover over an element, and an informational window slides in off the bottom, and when you hover off it slides back. Hover, when I hover off before the hover on animation is over, the given object jumps to the end of the first animation and back. How do I make the animation ease in and out when someone hovers over something?
function initialPlacement() {
block1.x = (-814);
block1.y = (stage.stageHeight - 100);
} initialPlacement();
tension.addEventListener(MouseEvent.ROLL_OVER,hover1);
[Code] .....
ActionScript 2.0 :: Ease On A Rotation Tween
Dec 18, 2006I am very new to actionscript and I want to make an object rotate 360degrees. I could do it with keyframes, but I want the rotation to ease in. I _KNOW_ it's possible to set up the object to rotate with an ease using actionscript.
View 1 RepliesActionScript 3.0 :: Tween Without Ease Or Duration?
Sep 12, 2010Is it possible to tween an object, but have it move along its path without any easing or duration, so it always moves at the same pace. For instance, if the path were looping around the screen, and zig zagging, or w/e it does; it would always go at the same speed, like 2 pixels a second. I use TweenMax.
View 2 RepliesActionScript 2.0 :: Horizontal Sliding Tween & Ease?
Dec 1, 2009I'm messing around with the Tween Class. Does anyone know how to make a number of objects, say 5 squares, shift horizontally from one starting point on the stage (left side) and stop at the right side, but stop them so that the spacing of squares is end to end. The first square shifts, then stops at the far right. The second stops next to the first and so on.
The tween is a Regular EaseOut, so the squares appear to bounce off the right wall as they stop.
The following code slides the squares and bounces them, but all squares overlap at the end of the animation. I need the ending _x distance to offset somehow.
[Code]...
ActionScript 2.0 :: Adding Ease To A Scripted Tween?
Sep 21, 2005how do i add an ease to this code:
Code:
new mx.transitions.Tween(logo_mc, "_y", mx.transitions.easing.Regular.easeOut, 500, 306, 2, true);
the 500 and 306 are for the y-pos. and the 2 is the speed.
ActionScript 2.0 :: Apply Single Animation To All Text?
May 21, 2011i want to apply some animation (like fly from left) to all the character of paragraph text.for this, i have created a movie clip with only one character (suppose "A") and done some animation like first it flies from left then it rotates and gets fade off and on.Now i have a paragraph in another movie clip and of course it contains lots of characters (more than 200) so it is not possible to apply same animation to all the characters individually making layers.
View 3 RepliesActionscript :: Flash Cs5.5 - 2 Motion Tween For An Object, 1 With Ease And 1 Without?
Sep 21, 2011I have encountered an interesting situation, I would like to simulate a ball thrown by a goalkeeper from top. Ball is going to move from right to left, it is small at the beginning, getting bigger at the half, because it gains height, and small again at the end. The scenario is this. And I do not want to use any actionscript code because of the performance loss caused by the event listeners.
How can I simulate two different kinds of tween (horizontal move is without ease and vertical move is with easeOut and easeIn) in the design environment of Flash cs5.5
By the way, I have already tried using actionscript code however, because there so many concurrent event, a little lag is occured at the beginning of each tween start.
IDE :: Alpha Tween (ease In From 0 To 1) An Object On Stage Over 25 Frames?
Apr 29, 2010I want to alpha tween (ease in from 0 to 1) an object on stage over 25 frames. And after the tween is over i want the object to persist on the stage and in the timeline. How can i do that?afaik i have to extend the tween in the timeline beyond the keyframe with 1 alpha. But when i do that this also extends the time of the tween from 0 to 1 and it actually lowers the alpha 1 in the keyframe automatically to some figure that fits with the ease in which apparently spans the entire tween.
View 8 RepliesActionScript 3.0 :: Apply TextFormat To A Single Line In A TextField?
Jun 4, 2010I have very little experience with text in flash. In a dynamic text field I know I can apply a TextFormat to the entire field but can I apply different fromatting to individual workd in the field if for example I wanted to make a word or a few words of text a hyperlink within a textfield. Can I do that or would I need to use html text?
View 3 RepliesProfessional :: AS2: Apply Multiple Properties To A Single Movieclip?
Aug 31, 2010Is there a way, in ActionScript 2, to set multiple properties for an exising movieclip in one command?
For example, is there a way to write something like this more succinctly?:
myMovieClip._x = 10;
myMovieClip._y = 10;
myMovieClip._alpha = 100;
[Code]....
ActionScript 2.0 :: Apply Multiple Mask In A Single Movieclip?
Jul 26, 2004I want to apply multiple mask in a single movieclip?? how do i do that i tried doesnt work with action script?
View 4 RepliesActionScript 2.0 :: Get Multiple Button To Ease / Tween Like Most Of Popular Sites?
Apr 14, 2006I've been trying to get multiple button to ease or tween like most of the popular sites. Mine seems to be not working correctly. I was wondering some one could look over my FLA (flash 8)
View 5 RepliesApply A Certain Tween To Several Objects?
Jun 7, 2009I'm working on a little flash project to show a card game being played out. Its just playing out a set of moves - no actual logic for actually playing the game.Anyhow, what i would like to be able to do is create a tween (hope thats the right term) where a card will appear in the center of the table, and then slide over to the players hands and at the same time shrink down so i can fit a few hands on the screen. So basically i need a tween that takes an object (the card), places it on the center of the screen, and then slides over and shrinks down to a specific point. So in whatever action script calls this tween, i guess i would need to feed it two values - which card it starts with, and where the card should end up.
View 7 RepliesApply Different Eases To Sections Of A Tween?
Jul 29, 2009Flash CS4 has a feature where a tween can have more than two keyframes. If a tween has three keyframes, then changing keyframe 2 will affect the motion from keyframes 1 to 2 as well as the motion from keyframes 2 to 3. This is a very cool feature.
But there's one problem: I can only figure out how to apply an ease to the entire tween, not to the motion between two keyframes. Do you know how I can apply one ease to the motion between keyframes 1 and 2, and a different ease (or the same one a second time) to the motion between keyframes 2 and 3?
I've had two ideas so far for getting the same result:
1) Make a custom ease that includes all the eases I want. I find this too cumbersome and imprecise, unless there's a way to copy an existing curve into the space between two keyframes of a second curve (without replacing the whole second curve).
2) Split the tween at each keyframe. But then every time I want to adjust keyframe 2 I have to do it twice, and sometimes the break ends up jerking slightly. I'd really rather keep keyframe 2 a shared keyframe.
Flash :: Apply Motion Tween To Many Frames?
Apr 16, 2011I hav created 24 frames (i use 24fps) by hand depicting a small move.Now I need to repeat this move for 1 minute and move it from left to right through the screen.is there a way to avoid copying-pasting these 24 frames and chaning them a little to the others 59 seconds by using motion tween?So, iam looking for a way to combine both the 24 frames and apply motion tween to them.
View 2 RepliesActionScript 3.0 :: Apply A Tween To An Extended Textfield()?
May 19, 2011im struggling a bit with syntax here -- i'm trying to add a method to my multiplayer flash games then when an arrow hits an enemy, it will display the dmg, while scrolling up and dropping off alpha.I seem to be having some linkage problems this is what i have:
var dmgwin:dmgtxt = new dmgtxt() //movieclip that will contain textfield
var dmgwinsub:TextField = new TextField(); //textfield that has dmg #
var tween:Tween = new Tween(dmgwinsub, "alpha", None.easeOut, 1, 0, 2, true); //an alpha
[code].....
ActionScript 3.0 :: Use Tween Class To Apply Filters To MovieClips?
Jul 24, 2009How can I use the Tween class to apply filters to movieClips?
i want to apply a DropShadow through a tween so that it applys smoothly. Actually i want it to apply on rollover and remove itself on rollout.
ActionScript 3.0 :: Apply One Tween To Multiple Movie Clips?
Apr 1, 2011I am writing a flash card game which slides the next card onto the stage when the user presses a button.There are 24 cards, and I have written a separate tween for each one... I think there is probably a more efficient way to do this. Here is what I have:
[Code]...
Actionscript :: Apply Tween Motion On UIcomponents In Flex?
Oct 29, 2010i want to apply tween motion on UIcomponents using actionscript in flex.
View 2 RepliesIDE :: CS4 New Tween - When Animate Or Apply A Preset Animation It Changes The Position Slightly?
Sep 23, 2010I really like the new tweens and motion panel that Flash added in CS4 but I'm having some problems with them that I cant find a solution to.
1. When I animate or apply a preset animation it changes the position slightly. I do work where I need things positioned exactly where I put them. For example X:70 Y:210 but when I animate it might for example change it to X:70 Y:210.5 and to make it more confusing even if I animate a group of them at the same time it only does this to some things and not all. Also if I try to change the position back manually it doesnt always let me in the properties panel. I have to go to the Motion Editor and change it there frame by frame.
2. Similar problem to above but with the Alpha property. I want to animate things where it fades on and then stays up for a few frames and then animates back off. When I try to do this using the properties panel it doesnt always let me. So for example I need my alpha values to be in this order for the 4 keyframes. 0, 100, 100, 0. But for the 0 it might force it to 3% instead of the 0 I need. Again I can only fix this by going to the Motion Editor and adjusting it frame by frame.
ActionScript 2.0 :: Navigation (Tween Class) - Apply The .onRollOver To An Invisible Button Instead
Jan 28, 2008// This is an array, a list of the buttons used. var myButtons = [this.myButton_1, this.myButton_2, this.myButton_3, this.myButton_4]; // Loops on all buttons from the first to the last one for (var i=0; i<myButtons.length; i++) { // When the mouse rolls over this menu option... reduce size just a bit. // NOTICE: I'm not taking into consideration the problem of having the hit area going down and "moving" the // mouse area and out of the button (possible rollover flicking). This is just a simple example afterall.
[Code]...
In the above instance how would I address the problem of flickering? I think want to apply the .onRollOver to an invisible button instead. How can this be done? Im just getting started with tweening animations outside the timeline with MCTween
Professional :: Moving Single Keyframes In Motion Tween?
Nov 12, 2010I feel like this should be pretty straightforward, but I can't figure out a way to easily move a single keyframe within a motion tween to adjust timing. I can't even figure out how to delete a single keyframe, for that matter. Everything I try ends up deleting all the keyframes within the tween or the entire tween.
View 2 RepliesIDE :: Tween Multiple Movie Clips Within A Single Layer?
Aug 26, 2009i want to have two different tweens on different movieclips within same layer...but what happens is..it groups both the mc into a single graphic...and applies tween for the entire graphic..and also i loose the Mc instance.
how can i achieve diff tweens on diff objects within a layer? More important is dont want to loose the MC instance
Professional :: How To Create Motion Tween (Text On Single Layer)
Aug 21, 2011I know it is very easy. Right click> create motion tween> drag to where I would like the text/object to move. But, Sometimes it doesn't seem to work when I drag the text. It will work the first time and for the second text on the frame it won't work. What are the requirements of a motion tween when it comes to text on a single layer in the same frame.
View 2 RepliesIncrease The Ease In And Ease Out Effect?
Nov 4, 2009Is there a way to increase the ease in and ease out effect? It will only let you choose -100 to 100, and I've messed around with the length of the tween, and the FPS of the movie, but I want the acceleration to be greater.
View 7 RepliesGet The Ease To Match / Ease Out To The Last Keyframe On 52?
Aug 5, 2009I have a simple motion tween from fr 1 - 52 (x and y property movement only). I create a custom ease - standard 100 ease in and then a 100 ease out. When this ease is applied to the motion, the ease "happens" after fr 52. So the object does not stop until fr 63 (eased out at 63. How can I get the ease to match / ease out to the last keyframe on 52, rather than 63??? See the attached image of the motion editor.
View 1 RepliesActionScript 3.0 :: Apply An "alpha" Tween To An Image On The Stage?
May 28, 2009I'm trying to apply an "alpha" tween to an image on the stage. I've made it a movieclip symbol an it's instance name is background_mc.Here's the code I am trying. It's not working. Can anyone tell me what I'm doing wrong?
import fl.transitions.Tween;
import fl.transitions.easing.*;
stage.addEventListener(Event.ENTER_FRAME,backgroundfadeIn);
[code]....
ActionScript 3.0 :: Apply "copied" 3D Tween In Class?
Nov 13, 2008I just started trying out cs4.
first time trying copy motion as actionscript.
Summary:It works when I directly paste the codes on the first frame of a blank document, with the movieclip on the stage.
BUT, if i put the motion codes in a class file, then strange compiler errors will appear in CS4 [code]...
These errors are shown without LOCATION. (i.e. cannot trace which line produces this error).
I really want to try out "copy motion as as3" in CLASS method.[code]...
