IDE :: Alpha Tween (ease In From 0 To 1) An Object On Stage Over 25 Frames?

Apr 29, 2010

I want to alpha tween (ease in from 0 to 1) an object on stage over 25 frames. And after the tween is over i want the object to persist on the stage and in the timeline. How can i do that?afaik i have to extend the tween in the timeline beyond the keyframe with 1 alpha. But when i do that this also extends the time of the tween from 0 to 1 and it actually lowers the alpha 1 in the keyframe automatically to some figure that fits with the ease in which apparently spans the entire tween.

View 8 Replies


Similar Posts:


Actionscript :: Flash Cs5.5 - 2 Motion Tween For An Object, 1 With Ease And 1 Without?

Sep 21, 2011

I have encountered an interesting situation, I would like to simulate a ball thrown by a goalkeeper from top. Ball is going to move from right to left, it is small at the beginning, getting bigger at the half, because it gains height, and small again at the end. The scenario is this. And I do not want to use any actionscript code because of the performance loss caused by the event listeners.

How can I simulate two different kinds of tween (horizontal move is without ease and vertical move is with easeOut and easeIn) in the design environment of Flash cs5.5

By the way, I have already tried using actionscript code however, because there so many concurrent event, a little lag is occured at the beginning of each tween start.

View 1 Replies

Professional :: Repositioning An Alpha Tween From The Stage?

Jul 6, 2010

attempting to reposition an alpha tween on the stage.
 
i'd like to do this without creating another keyframe that changes the position of the alpha tween.

View 8 Replies

ActionScript 2.0 :: Object Movement And Alpha Tween

Nov 17, 2010

So I have so parts of actionscript which I am figuring out on how to make them one. What I am wanting to do is move an object to the right and fadeout. Here is my code to animate right 10 pixels, this works perfectly.

[Code]....

View 2 Replies

ActionScript 2.0 :: Ease Alpha With Hittest?

Jan 4, 2008

im using the hittest code from senocular to make a menu fade out. it's working but i was wondering if someone could explain how i could add ease to the alpha. i've tried implementing some of the ease codes found on here but havn't had any luck

[Code]...

View 1 Replies

Ease In And Out Between Three Frames?

Aug 28, 2009

I have been wondering how to do advanced ease in and out between three frames.  What I have been trying to figure out, is when using the new tween function in cs4.  So what I do is i make a simple animation of a ball going from point a to point b, and apply a ease in and ease out.

now with that in place the animation works great.now if i want to make the ball go to point c with and ease in and ease out. the ease in and ease out is now applied to the whole animation intead of being able to have 2 seperate ease in and ease out for animation from point a to point b, then animation from point b to point c.

is there anyway to make it so that i can multiple ease in and ease out for these frames?

View 1 Replies

Actionscript 2.0 :: Make A Box Which Is A Movie Clip To Ease Alpha Out

Feb 17, 2009

I have a button and when this button is clicked, I want it to make a box which is a movie clip to ease alpha out.

newsButton.onRelease = function() {
gotoAndPlay("News");
};

View 2 Replies

ActionScript 3.0 :: Apply An "alpha" Tween To An Image On The Stage?

May 28, 2009

I'm trying to apply an "alpha" tween to an image on the stage. I've made it a movieclip symbol an it's instance name is background_mc.Here's the code I am trying. It's not working. Can anyone tell me what I'm doing wrong?
 
import fl.transitions.Tween;
import fl.transitions.easing.*;
stage.addEventListener(Event.ENTER_FRAME,backgroundfadeIn);

[code]....

View 3 Replies

IDE :: Movie Clips Contents Alpha At Different Rate During Tween Class Tween

Mar 4, 2010

If i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.

For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).

The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...

is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!

View 1 Replies

Apply Ease In And Out Both To A Single Tween?

Apr 22, 2010

I was wondering if theres a way to apply ease in and ease out both to a single tween..as i want the tween to start slowly than gain normal speed and then again stop smoothly.

View 2 Replies

Ease Control In Motion Tween

Aug 4, 2009

I have a motion tweened layer that uses 445 frames. However the actual property change occurs from frames 1 - 360. After fr 360, there are no property changes. When I create a simple ease - ease out, set at 100. This ease shows that it takes 445. When I apply the ease to my properties (x and y specifically). The ease appears to be applied and the movement stops at fr 223. So between 223 and 360 there is no movement. The dash line of the ease in the properties motion editor goes diagonally to 223 then flattens out at the top - indicating no movement. How do I get the ease to apply to all 360 frames, and slowing down up to 360, rather than earlier than that?

View 1 Replies

ActionScript 3 :: How To Make Tween Ease In And Out

Feb 24, 2011

I've set a hover on and hover off tween to a certain element in flash, where you hover over an element, and an informational window slides in off the bottom, and when you hover off it slides back. Hover, when I hover off before the hover on animation is over, the given object jumps to the end of the first animation and back. How do I make the animation ease in and out when someone hovers over something?

function initialPlacement() {
block1.x = (-814);
block1.y = (stage.stageHeight - 100);
} initialPlacement();
tension.addEventListener(MouseEvent.ROLL_OVER,hover1);
[Code] .....

View 1 Replies

ActionScript 2.0 :: Ease On A Rotation Tween

Dec 18, 2006

I am very new to actionscript and I want to make an object rotate 360degrees. I could do it with keyframes, but I want the rotation to ease in. I _KNOW_ it's possible to set up the object to rotate with an ease using actionscript.

View 1 Replies

ActionScript 3.0 :: Tween Without Ease Or Duration?

Sep 12, 2010

Is it possible to tween an object, but have it move along its path without any easing or duration, so it always moves at the same pace. For instance, if the path were looping around the screen, and zig zagging, or w/e it does; it would always go at the same speed, like 2 pixels a second. I use TweenMax.

View 2 Replies

ActionScript 2.0 :: Horizontal Sliding Tween & Ease?

Dec 1, 2009

I'm messing around with the Tween Class. Does anyone know how to make a number of objects, say 5 squares, shift horizontally from one starting point on the stage (left side) and stop at the right side, but stop them so that the spacing of squares is end to end. The first square shifts, then stops at the far right. The second stops next to the first and so on.

The tween is a Regular EaseOut, so the squares appear to bounce off the right wall as they stop.

The following code slides the squares and bounces them, but all squares overlap at the end of the animation. I need the ending _x distance to offset somehow.

[Code]...

View 0 Replies

ActionScript 2.0 :: Adding Ease To A Scripted Tween?

Sep 21, 2005

how do i add an ease to this code:

Code:
new mx.transitions.Tween(logo_mc, "_y", mx.transitions.easing.Regular.easeOut, 500, 306, 2, true);

the 500 and 306 are for the y-pos. and the 2 is the speed.

View 3 Replies

Professional :: Stop Motion Tween While The Object Is Still On Stage?

Mar 25, 2011

I'm a young girl who recently discovered flash cs3 (I started yesterday) I found this tutorial about how to make a flying bird. I did as the tutorial said, I just made a butterfly instead of a bird. Now I made a flower and I want the butterfly to land on the flower. The tutorial only showed me how to make the bird/butterfly fly through the scene and not how to stop it while I still see it in the scene. I figured out how to stop the motion tween but then the butterfly dissappeared from the flash file after it stopped and I also figured out how to make it land on the flower but it keeps moving its wings Now I need help to make it stop moving the wings while it's still visible. I hope my explanation is understandable. As I said I just started with this program so I don't know how to explain all the different things.

I tried to upload the file on imageshack but it seems like it doesn't support this kind of file, or I'm saving it wrong. I could need some help with that too so I can show others what I'm making without that they have to download the file so it's easier to get help when I'm stuck A link to the .swf file [URL]

[Code]...

View 3 Replies

ActionScript 2.0 :: Get Multiple Button To Ease / Tween Like Most Of Popular Sites?

Apr 14, 2006

I've been trying to get multiple button to ease or tween like most of the popular sites. Mine seems to be not working correctly. I was wondering some one could look over my FLA (flash 8)

View 5 Replies

ActionScript 2.0 :: Make An Object Ease After Another Object That Is Easing Like A Motion Trail

Aug 20, 2004

i wanna make an object ease after another object that is easing... like a motion trail. but the objects just go to the corner of the screen....and won't ease after each other.

View 10 Replies

ActionScript 3.0 :: Setting The Alpha Of MovieClip With Objects Changes The Alpha Separately For Each Object

Oct 23, 2010

[URL] i want the object to fade out but in the object there's a lot of overlapping pictures and each becomes half transparent. how to make the movieclip to change the alpha as it was without objects?

[Code]....

View 2 Replies

Set Alpha For Whole Stage Down But Have 1 Mc Full Alpha?

Aug 2, 2011

I want to do aplpha = .5 for the whole app, but then have a MC display at full alpha, is there any way to do this?

View 6 Replies

ActionScript 3.0 :: Alpha Vs. Movieclip 2 Frames?

Aug 14, 2010

So I've a movieclip with 2 frames placed on stage. 1st frame is button on state, 2nd frame is button off state which is just a bit lighter icon which can be achieved with alpha 40%.So I was wondering what would be better to do: leave the movieclip with 2 frames and then in ActionScript use .gotoAndStop() to show the off/on state or create movieclip with 1 frame and with ActionScript just change the .alpha of icon ? I mean better in performance, speed and all those things. Because if I have the movieclip with 2 frames and it's added to stage it's redrawing it going to 1st, 2nd, 1st, 2nd.. frame until I .stop() it..

View 2 Replies

ActionScript 2.0 :: Spin Object With Ease On It's Axis?

Jul 16, 2009

wanna spin an object on its axis 45 degrees each time by pressing 4 buttons, so 1st button moves it 45 degrees, 2nd button moves a further 45 degrees and so on...I've got the sliding of an object left to right or up and down nailed to this code

onClipEvent (load) {
_root.newposition = "null";
}

[code].....

View 7 Replies

ActionScript 2.0 :: Object Follows Mouse With Ease Only When Moused Over

Feb 12, 2006

i have been trying to figure out how to make an object move when its moused over.
once moused over, i would like for it to move with an ease (penner), but once the mouse is off the object, i would like it to ease into a dock position.

[Code]...

View 4 Replies

Professional :: Should Alpha Tween Go 1 To 100 To 1 Or 1 To None To 1

Sep 27, 2010

I have a line that starts invisible then becomes solid then invisible again. First keyframe is alpha 1%, should the two keyframes that follow next in the timeline where it shows as full strength colour be left alone, showing still as colour>none in properties, or should I choose alpha and 100% ? Last keyframe again sees it given alpha 1%. ( I was told dont use 0% as it causes flash more work !)What is best practice here? I have many of these to do so leaving keyframes as 'none' for colour would make life much quicker.

View 3 Replies

ActionScript 2.0 :: Tween Something To Alpha=0?

Aug 26, 2005

Does anyone know of a actionscript that can tween something to alpha=0. Id like to tween something to alpha 0% from alpha 100% rather then do every single one manually. I have a thumnail box that changes images just thought it would be easyer to put a action on the timeline to fade it out rather then tween it one at a time.

View 2 Replies

ActionScript 2.0 :: Manipulate An Object's Rotation To Ease In Toward A Specific?

Dec 21, 2009

How can I manipulate an object's rotation to ease in toward a specific rotation?[code]...

View 5 Replies

Professional :: Animation - Object To Fly In Smoothly And Ease To Stop

Feb 22, 2011

[URL]. Link to my problem .swf file. I am trying to get the bullet to fly in smoothly and ease to a stop. Also there appears to be some audio trying to play, but I have no audio in the library, or the stage! I can't get this animation to play smoothly at all. This was originally exported from an After Effects project (CS4) and there are only 8 layers - 1 for the bullet, 4 for button text, 1 of the main title, 1 of the dude standing (I'm hopefully going to have the title fly in from behind him) 1 of the bg and other text together. Why this animation won't play right? (I'm using Flash CS4 to do this).

View 2 Replies

ActionScript 2.0 :: Make An Object Decelerate / Ease Into Position?

Nov 20, 2004

I am trying to find out a nice simple way to make an object decelerate / ease into position.

View 2 Replies

ActionScript 3.0 :: Saving Alpha Property When Changing Frames

Mar 22, 2010

i have this little display and when you click on certain items their alpha changes to 0.1, this worked fine until i added another frame with a different display on another frame. so now when you change frames and go to the new display then go back to the old display on frame 1 the alpha properties are all reset back to 1. So to fix this i thought i could simply add all the movieclips with an alpha less than one to an array when i left the frame then when you come back to the frame you could reset all the moviclips in that array back to having an alpha of 0.1. But this doesnt seem to work. here is the code i used.[code]But this code doesnt seem to work, the strange thing is even when i add some trace statements they tell me that the alpha does in fact equal 0.1 but visibally they haven't changed.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved