I'm messing around with the Tween Class. Does anyone know how to make a number of objects, say 5 squares, shift horizontally from one starting point on the stage (left side) and stop at the right side, but stop them so that the spacing of squares is end to end. The first square shifts, then stops at the far right. The second stops next to the first and so on.
The tween is a Regular EaseOut, so the squares appear to bounce off the right wall as they stop.
The following code slides the squares and bounces them, but all squares overlap at the end of the animation. I need the ending _x distance to offset somehow.
I'd like to use a gallery similar to the one atfor a gallery I am creating. I have an idea of how the horizontal motion would work using a timeline but does anyone have an idea of how I could use actionscript to move the movieclip horizontally so that each image is centered or using a tween class?
I am working with a downloaded component that moves separate panels horizontally with an ease. there are 4 panels and they are controlled by 4 buttons to make them move.The code for the panels is:
onClipEvent (load) { targetx = 46.0; delay = 8;[code]... T he code for each button is:
on (release) { menu.targetx = 46.0; }
The value changes with each button to move the panels.My question is the buttons are actually buttons and I want to make them into movie clips but when I do that and apply the same code it does not work. Can this only be done with "buttons"? I am trying to create a portfolio section that slides from panel to panel by thumbnails and left and right arrows.
URL..the menu when you move your mouse over model some shape also move above the model link and when you click on any model name shape remain on that model name and load the detial model range movie.
I'm making a classic horizontal sliding menu flash site, but just can't seem to iron out the last little tweak. How do I get the mouse to not react when over the open section, I've tried 'delete mc3.onRelease;' which works, but then that section will not longer work at all after it's been closed.
I've attached the fla and a link to the beta site as I'm finding it hard to explain exactly what I mean:[URL]..
I was wondering if theres a way to apply ease in and ease out both to a single tween..as i want the tween to start slowly than gain normal speed and then again stop smoothly.
I have a motion tweened layer that uses 445 frames. However the actual property change occurs from frames 1 - 360. After fr 360, there are no property changes. When I create a simple ease - ease out, set at 100. This ease shows that it takes 445. When I apply the ease to my properties (x and y specifically). The ease appears to be applied and the movement stops at fr 223. So between 223 and 360 there is no movement. The dash line of the ease in the properties motion editor goes diagonally to 223 then flattens out at the top - indicating no movement. How do I get the ease to apply to all 360 frames, and slowing down up to 360, rather than earlier than that?
I've set a hover on and hover off tween to a certain element in flash, where you hover over an element, and an informational window slides in off the bottom, and when you hover off it slides back. Hover, when I hover off before the hover on animation is over, the given object jumps to the end of the first animation and back. How do I make the animation ease in and out when someone hovers over something?
I am very new to actionscript and I want to make an object rotate 360degrees. I could do it with keyframes, but I want the rotation to ease in. I _KNOW_ it's possible to set up the object to rotate with an ease using actionscript.
Is it possible to tween an object, but have it move along its path without any easing or duration, so it always moves at the same pace. For instance, if the path were looping around the screen, and zig zagging, or w/e it does; it would always go at the same speed, like 2 pixels a second. I use TweenMax.
I have encountered an interesting situation, I would like to simulate a ball thrown by a goalkeeper from top. Ball is going to move from right to left, it is small at the beginning, getting bigger at the half, because it gains height, and small again at the end. The scenario is this. And I do not want to use any actionscript code because of the performance loss caused by the event listeners.
How can I simulate two different kinds of tween (horizontal move is without ease and vertical move is with easeOut and easeIn) in the design environment of Flash cs5.5
By the way, I have already tried using actionscript code however, because there so many concurrent event, a little lag is occured at the beginning of each tween start.
I want to alpha tween (ease in from 0 to 1) an object on stage over 25 frames. And after the tween is over i want the object to persist on the stage and in the timeline. How can i do that?afaik i have to extend the tween in the timeline beyond the keyframe with 1 alpha. But when i do that this also extends the time of the tween from 0 to 1 and it actually lowers the alpha 1 in the keyframe automatically to some figure that fits with the ease in which apparently spans the entire tween.
I've been trying to get multiple button to ease or tween like most of the popular sites. Mine seems to be not working correctly. I was wondering some one could look over my FLA (flash 8)
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart [code]
I have a problem with which I'm struggeling. I tried dearching for the solution, but the search was unlucky. My problem is that I want to build my stie like a cross (with only the centered page visible) and then, through a mouseclick, let the page move to the center position. To do this I want to incomrporate a horizontal and vertical action tween. However if I do this with the code below, it only tweens the y tween. How can I get flash to execute both tweens?
Code: menu_1.onRelease = function (){ function tween() { var xPosT:Tween = new Tween(object, "_x", Strong.easeOut, object._x, 0, 1, true)}; function tween() { var yPosT:Tween = new Tween(object, "_y", Strong.easeOut, object._y, 0, 1, true)}; }
I have a horizontal motion tween that is juddering as it moves across the page - it's text and very noticeable although I can't seem to find a resolution to make it move smoothly...
I am trying to make a horizontal flash website in AS3. I have my navigation all set up and want it to Tween (slide) to the right for all of my 4 pages. My stage size is 2880w X 600h and I want my X to slide over in increments 720px to the right when the navigation is clicked. I also want it so when I test me SWF that I only see a 720 X 600 px area at a time. So far I have looked up Tweener classes online and they seem very confusing and need to be stripped down a lot.
Is there a way to increase the ease in and ease out effect? It will only let you choose -100 to 100, and I've messed around with the length of the tween, and the FPS of the movie, but I want the acceleration to be greater.
I have a simple motion tween from fr 1 - 52 (x and y property movement only). I create a custom ease - standard 100 ease in and then a 100 ease out. When this ease is applied to the motion, the ease "happens" after fr 52. So the object does not stop until fr 63 (eased out at 63. How can I get the ease to match / ease out to the last keyframe on 52, rather than 63??? See the attached image of the motion editor.
I'm currently learning Flash (CS4, AS3) and am creating a game. I have currently 1 flv file with 4 scenes, I then move from left to right and then to scene 2 and go from left to right. This is the game where items pop up that need to be clicked on and you get points.
Is there any way I can combine these onto 1 scene? Flash only allows you to have a maximum of 2880px wide.The reason for this is the transition between the scenes is RUBBISH and that my AS is not working correctly in between scenes (it loses values).
I'm trying to get a prototype working for a website.
What I would like to do is have five buttons at the bottom of my stage, and when I click them, an image fades AND eases in. I have this part finished so far, but the issue is that when I click another button, I want the previous image to fade/ease out before the next one fades/eases in.
Here is my code:
Code: Select all import fl.transitions.Tween; import fl.transitions.easing.*; import fl.transitions.TweenEvent;
I have been wondering how to do advanced ease in and out between three frames. What I have been trying to figure out, is when using the new tween function in cs4. So what I do is i make a simple animation of a ball going from point a to point b, and apply a ease in and ease out.
now with that in place the animation works great.now if i want to make the ball go to point c with and ease in and ease out. the ease in and ease out is now applied to the whole animation intead of being able to have 2 seperate ease in and ease out for animation from point a to point b, then animation from point b to point c.
is there anyway to make it so that i can multiple ease in and ease out for these frames?
i have a mapMC on the stage and 6 buttons. i need to be able to make the buttons move the mapMC to specified coordinates. the coordinates are set and will never change. i also need an easing from one location to the next. i guess i'll go ahead and throw in a bonus question for any of you aces out there. lets say location "A" is at x=200, y=400. i would like the mapMC to get there and scale 120%. so a button that gets pressed will go to its coordinates and scale acordingly. i can see that this could be script heavy, but for some reason not too difficult.
