I cannot open any .fla file with FlashBuilder 4 under Windows:When I click on a .fla file I get the following error: "Windows cannot find 'Flash'. Make sure you typed the name correctly, and try again."
View 3 RepliesI use the Open Resource Window (Command-Shift-R) a lot in Flash Builder and it saves me a lot of time. But I canīt seem to get it to work with my projects xml files. I know this has been working on previous projects ut I canīt find any settings for this.
View 1 RepliesI installed Flash CS4 Professional trial version for school use. It wouldn't install successfully. I deleted the font files the troubleshooting guide said to, tried again, but gave up. (I'm afraid to run regedit and mess up everything else I have loaded.) (I previously had the Fireworks CS4 trial version loaded, then uninstalled it.) My problem is this- I have it running, but it saves files and then they can't be opened, even if I use the save function often- it's worse when I create the file, test the movie and then save.If I try to open it again, it says "cannot open file." Once it opened a copy I had saved, and it appeared blank, even though it was 544 kb file size. I only need it for a few more days, one more assignment and I'm afraid my previous files are corrupt. I have Windows Vista Home Edition.
View 4 RepliesHow to read and display a pdf file using flash builder 4.5 and as3 for iOS application??
View 2 RepliesI wanted to import an older FB project into the flash builder on my new pc, but I only have the filestructure. So I used 'import>existing projects into workspace'.The files seem to be intact still, but the project now gives me an error regarding an swc in the bin folder:
'unable to open 'something'in'something'.swc
I just got my MacBook and am trying out the Flash BUilder on said platform. I've installed Firefox and Google Chrome on my MacBook but I can't seem to find a way to set which browser would launch my Flex apps whenever I hit the Run button inside Flash Builder. As far as I know, I can locate the Browser property on the Project Properties on my Windows copy of Flash Builder but I couldn't over here at my Mac. Any thoughts?
View 1 RepliesI am trying to import an swf file into Flash builder. My swf file is correct, and displays the correct data. However, when I import into Flash builder and launch my project, I get a blank HTML. Not sure why? I am carrying out the following steps in the sequence listed below
1. Create an FLA component in Flash Professional.
2. Go to Publish settings, click on export to SWC.
3. Exported SWC displays correct data.
4. Create new action script project in Flash Builder.
5. Add the SWC folder as path of the referenced library section.
6. Added the following code in action script code
var mystickyman:MovieClip = new stickman as MovieClip;
addChild(mystickyman);
Here stickman is the linkage if of swc given in Flash Professional.
I am using SWC for the first time , and am sure am missing out on some steps.
I'm developping a mobile application in Flash builder. So in Flash Builder Burrito , I was using the Flex Hero SDK 4.5.0 but they currently realesed the Flex4.5.0.20967.
I downloaded the zip file [URL]
I extracted it into a map on my C: drive. Then I opened my flash builder burrito. Added him by (Window>Flash Builder>Installed Flex SDK's. I his add and added my location.
This went very well. I changed my code with the new commands.
Next I wanted to test on my android phone but now my problem: I can't make any apk files anymore.
Flash Builder 4.5, and some lads told me that i can generate IPA file in order to generate iPhone apps from it.
View 1 RepliesI've read that it is not possible to save files using Flash CS5.
Later I've read that it is possible using Adobe Flex.
Now, what about using Flash Builder?
I'm talking about save data files at runtime, such as user usage data..
I just wanted to ask:
1) Is there a way to add swc files after the project is created
2) And is there a way to link some of assets in those swc to classes (for example link a ball asset to a class the implements its functionality. You can do that directly from flash pro CS5.5, but is there a way to do it in flash builder)
When i make a release build the folder is populated with a number of swfs. Are all these swfs necessary?Is there a option to generate one swf?
EDIT: The files I see are:
framework_4.5.0.18623.swf
osmf_1.0.0.16316.swf
rpc_4.5.0.18623.swf[code].....
According to the answers to this question here, the reason why I'm not seeing errors as I work in Flash Builder is that FB is "optimizing" them out because they aren't referenced at any point in the code execution. Is there an option to force Flash Builder to compile all files regardless of whether they're used in the software?
View 2 RepliesI am currently making a Flash Builder Project using Actionscript 3. I have come unstuck trying to embed and play MP3 sounds.I know that the MP3 file is loading as i have traces the bytes loaded, i have also traced the function which plays the MP3.
import flash.media.Sound;
public class Sounds
{[code]....
According to these instructions, I'm trying to use ANTLR generated *.as files in a current Flash Builder 4.5.1 project. Therefore, I added this ANTLR's Actionscript runtime to my project - without problems. I compiled lexer/parser specs using ANTLRWorks without problems too. I added the language option to the source *.g file to make ANTLR generate Actionscript sources:
[Code]....
I have a issue here with unzipping the .zip files that i have in combobox.i select 1 .zip file and after selecting the particular .zip file Button should unzip it and put the contents in another combobox.
[Code]...
I imported an .fxp project into a Flash Builder and then observed there are 5 .mxml files in the src/(default package) directory. Silly question -- how to run each of these five files?
Since I've named the project differently than any of the .mxml files, whenever I try to run something it uses the default (empty) .mxml file named after the project. Deleting that empty mxml file didn't help anything. I also tried to clean the project, but nothing changes (although I see the directories refresh with the same contents). There are no html files in the bin-debug directory.
There must be some simple way to run those .mxml files that I'm missing.
I got a XFL file, its library files and AS files in a directory.I would like to use Flash Builder 4(FB) for editing AS files, running the compiled SWF and profiling.When I created a New->ActionScript project in FB, I could edit the AS files but didn't know how to link the XFL file and run them.When I created a New->Flash Professional Project, I was prompted for a XFL file, and although the chosen XFL file and the AS files are in a same directory, the AS files are not automatically included in the project. I couldn't find a way to add exiting files in the project either.
View 1 RepliesI received an inheritance old flex project. I've never worked with Flex. I installed the latest Flash Builder and I need to know the exact version of used Flex SDK. Is there any way to know used SDK version from project files?
View 2 RepliesI am trying to edit a website for a friend (built with Flash and XML) and i can't seem to get into any of the .Fla files.I don't know if it is my version of Flash (CS4) or the files and not sure how i could test it. Could also just be a CS5 file hence i can't open it.URL...
View 5 RepliesI use the translator. Not for a long time has decided to pass from the version cs3 and to put itself the version cs4 flash. All has risen like normal, was installed... But is while one any not clear thing to me, cs4 cannot start SOME source codes.fla (from template monster.com) which at me were easy started on the version cs3, the program simply starts to hang, and as a result I need to finish the appendix
View 1 RepliesI'm trying to access a Flash file, created in CS4, in Flash 8 but am getting an "Unexpected file format." error.Is it just not possible to open the file in Flash 8?
View 2 RepliesDownload and install CS5 trial version but can't open flash files with flash CS5. Got error message like this:'Slides and forms documnets are not supported in this version of Flash.
Does full version support flash file with slides? If not, what can I do with the old flash files which created by Flash MX2004.
I am trying to edit a website for a friend (built with Flash and XML) and i can't seem to get into any of the .Fla files.I don't know if it is my version of Flash (CS4) or the files and not sure how i could test it.Here is an upload of one of the files i am talking about
View 2 RepliesI just uprgraded my Mac OS from 10.4 to 10.6. Now some of my Flash files open with no timeline and nothing on the stage. If I try to open a library item it crashes. I tried reinstalling Flash and installing all updates to the OS.
View 1 RepliesI make all the Flash banners for my company including onsite events and IMAX films. There are pre made banners that I (we) are allowed to download and use from trusted sites (Paramount/Universal/IMAX/ etc). These are sent out so we can plug in our branding to promote the films locally. In the past year, all the Flash files that I have downloaded or had mailed to me on a disc will not open. The error that I get says:Failed to open document./Users/myname/Desktop/Flash Banners/FLASH/genericflashfile.fla.I first though that maybe the studios were using CS4 or now CS5, but the icon that comes with the .fla files are definetly CS3. I even purchased the SWF Decompiler as a work around, but once I decompressed the swf file, and then re-exported as a fla file, I received the same failed to open error.Files I create on my own work fine.I was wondering if I missed an update for CS3, but I double checked and am up to date.
View 3 RepliesCS 5 made the most terible thing I ever could imagine. I saved over the last files and some temp files in order to have backup of my project. I saw something is wrong and don`t open the first file, so I saved 3 more times. I restart and now Flash don`t open those files. The flash open old files, but I`m going back for three days.
View 2 RepliesI am trying to edit a website for a friend (built with Flash and XML) and i can't seem to get into any of the .Fla files.I don't know if it is my version of Flash (CS4) or the files and not sure how i could test it. Could also just be a CS5 file hence i can't open it.
View 1 RepliesI'm trying to create a rotating cone using papervision where all the segments can be filled with a color / image separately. So just like you can use a MaterialsList to render all the sides from a Cube separately.
View 1 RepliesI have been working on a files in CS3 for a while however, my CS3 trial ran out so i downloaded the CS4 one. Now when i open the same file via CS4, it says: "Could not load scene into memory, Your file may be damaged."Then most elements are there buy some are missing the MC's are in the libary but are now empty.
View 0 Replies