I am looking to drag a movie clip onto another movie clip. Both movie clips are within a movie clip. I have tried the following and the drag part works but it doesn't stay on the target:
[Code]....
how to attach a movie clip to another movie clip after drag and drop .I mean to say that is it possible to make a new movie clip with the target movie clip and dropped movie clip.
View 2 RepliesIm making a game where you have a little dude you're walking around with using the arrow keyes. Now i have certain underwater scenes and here i thought it would be nice to add a little movie clip of air bubbles coming out of the dudes mouth.
So i have the movie clip with the animated bubbles laying in the same frame as the scene (where the dude will walk around). Im looking for a script that makes it so that as soon you enter the scene the "bubbles" movieclip will "attach" itself to the "man" movieclip. (Or atleast follow it around)
I dont want to modify the man clip itself with bubbles since then the bubbles will interfere with some hittest i have (and just want the bubbles to be aesthetic)
how to duplicate movie clips which allow me to drag every movie clip duplicated.
View 4 RepliesI have very annoying and easy (I believe) problem with Macromedia Flash 8. My movie consists of 10 scenes. I wanted them to be played each after another (e.g. scene 1, scene 2, etc.).However, the scenes that consist of movie clips are just flashing and movie proceed to next scene. There is no problem with scenes that where done just in main timeline. I tried to put some action script on these movie clips like:
on (release) {
play ();
}
Im trying to do a drag and drop system where the user can drag a movie clip into an area. Although i would like to make it snap to a target instead of just sitting wherever it lands in the area. Problem Two:
The next thing i am trying to do is when the user has a movie clip on a target already, and trys to put another movie clip in that target area, it will replace the one thats in there and go back to its current position. Here is the script of what i have done so far:
[Code]...
I have some movie clips. i want to drag all clips when i drag single movie clip. Ex. I have movie clips "A1", "A2", "A3", "A4", "A5" . Randomly visible some of them. Suppose "A1", "A3", "A4" has visible. When i will drag "A1" movie clip all these "A3", "A4" also move with "A1".
View 6 RepliesI have the following code
stop();
positions = [];
imageTotal = 8;
[code]...
It basicly loads some pictures into movie clip holders and they stream horizontally across the bottom of a page.My problem is i cannot get them to continuously loop, at the moment they just cross the screen once then stop.
I have 2 buttons on the root of the flash, i want use those buttons to control the frames of a movie clip, how can it be done?
View 2 RepliesI have a movie clip on my stage which I want to move up 2 seconds into the movie, as if it is popping out of an invisible box. I can do it on the timeline, but wondered if anyone knows how to do it using as2?
View 1 RepliesI am having the hardest time trying to get AS to play from within a MC called "content_002".Please remember that this AS is an XML-Driven sub-menu that successfully works on it's own. When I tie it into a MC, it doesn't like to work with my shifting main-menu.
For this post, I'll first send the "combined" .fla file then I will post them apart to see if anyone can find a better way.
using flash 8 AS2. I was thinking if it was possible to create a waving moving banner, with some flags of countries moving across it. much like the example below. Is it possible I will create a simple rectangular banner, then animate it in the timeline with flowing flags of a few countries from left to right. then i wonder if actionscript can create a wavy perspective banner that flows from the left to right in a loop or full stop from the movieclip timeline looping forever in it? The red arrow shows how the banner will animate towards the right from the left.
View 1 RepliesI am trying to add x amount of movieclips to the stage with their own unique _x value. Also with each movie clip added i need to add an array with a smiler name. I tried this code.
Actionscript Code:
enemycount = 46;for (i=1; i<enemycount+1; i++) { this["currentenemy"+(i)]=_level0.enemydatabase[0]; this.attachMovie("BrownFox", ["enemy"+i], 101, {_x:100, _y:219});}for (i=enemycount; i<51; i++) { this["currentenemy"+(i)]=_level0.enemydatabase[1];}trace (this.enemy1._x);trace (this.currentenemy45);
under the attachmovie I have ["enemy"+1] but when i trace enemy1 it returns undefined. But when I put ["enemy"+1] it returns the _x value. also if I put _x: i * 5, I only see one movie clip so I have a feeling they all have the same _x and_y value. basically I wanna be able to add 2 enemys to the stage with out over lapping, and the option to add 50 with out too much over lapping (would like to avoid overlapping by also giving various y depths, between 200 and 250)
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
I'm creating a small drag & drop activity, and I want to be able to check and see if the dragged movie clip is completely within the bounds of another movie clip (or at least in the bounds of a certain x/y zone on the main stage. I can't use dropTest because it returns true if any tiny bit of the movie clip overlaps with the dropTest movie clip.
I also thought of something that just checks the x/y coordinates of the dragged movie clip, but I'd need this to reflect a range of values rather than one coordinate. For instance, I'd want to return true if the movie clip's x is between 50-60 AND the y is between 50-60. I'm attaching a small graphic to illustrate in case my explanation isn't clear enough [URL]
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
i am making a pacman game, and i need to know how to make it go to a certain scence when a movie clip collides with another movie clip.
View 2 RepliesThere is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
I have been having some trouble with a movie clip basically designed to act as a button for a store front for a website.This movie clip has, stored as the front of the movie (i.e. before you click in to edit the movie) the following code:
on(rollOver){
gotoAndPlay("Over");
}[code]..........
This gives the movie the hover over and out effect and animates the button so as once pressed the button expands to give a 'Product Details' view.However, when clicked the info shows up as it should but the hit area which I put into the Movie Clip is still on the info area so none of the contents on this new window are accessible and when the cursor leaves the designated info area the movie clip returns to its first stage as it would appear at the start of the animation.Is there any simple way to disable the HitArea on specific frames within a Movie Clip?
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 RepliesI created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Repliesiam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
View 2 Repliesi am trying to use the Tween class to change the size of movie clip to certain height.the code works for me but when resizing the parent, it effects the child.i tried the height and scaleY property for the thum, but does not work.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[code]....
I shuffle the movie clips and set startDrag for each movie clip, but it is not able to drag, The movie clip only move slightly and return to it location, what is/are the reasons ?
View 2 RepliesWhen my main movie starts, the firsts thing it does is load swf for the user to enter their user name and password. I want this movie (and subsequent such movies) to be able to be dragged around the stage. There are some excellent tutorials & examples on the web but none seems to address my situation. The code:
this.createEmptyMovieClip("lh", this.getNextHighestDepth());
lh._x = 200;
lh._y = 200;
[code]......
script that would allow the user to clikc and drag mulitple symbols- similar to this:
on (press) { startDrag (this._parent, false);}
on (release) { stopDrag ()}Only that instead of using "this", it drags the following symbols on mouse click:
background (a movie clip)[code]..............