I am using an AS to create a 3D Carousel gallery. I have button on the same page as the carousel gallery. My problem is that when I click on the button and the frame is changed, the carousel gallery stays on top of my other pages. Hos do I remove this? I have attached the AS code for your reference.
Code:
stop();
var numOfImages:Number = 5;
[code]......
I use this:
this.onEnterFrame = function(){
if((kropp==2)&&(huvud==4)&&(bg.BGtyp==1)){
bg.nextFrame();
trace("good");
}
to know when different variabels are right. But I don�t want the check to be once every 2 second and not every frame. I could put the code in a looping mc but could I do that in a code?
onEnterFrame=null, onEnterFrame=undefined & delete onEnterFrame....
Which one to use??? What are the performance considerations. If all my movieclips on-stage are running a MovieClip.prototype.onEnterFrame = function() {run initial stuff before setting onEnterFrame=null/undefined... }, will there be performance hits? It's sad that delete onEnterFrame doesn't work unless I delete the prototype enterFrame as well, which would make the clips reinitailise itself again once you declare the enterFrame prototype again (i need to do this since there's more movieclips that end up appearing on-stage, and they need to automatically initialises themselves the moment they appear).
[Code]...
1. How do I use onEnterFramer to check if a word is being changed in a textField (tf1)? If the word has been changed how can I remove the onEnterFrame action?
View 5 Replieson the main time line i'm loading external swf at specific frame using moviecliploader class how do i unload the same swf when exiting that frame?this code is on the main timeline at the frame i want it to load at but i don't know how to unload it when i exit that frame:
this.createEmptyMovieClip("holder2_mc", this.getNextHighestDepth());
var mclListener:Object = new Object();
var image_mcl:MovieClipLoader = new MovieClipLoader();
image_mcl.addListener(mclListener);
image_mcl.loadClip("RVBanner2_FLASH8.swf", holder2_mc);
I'm trying to set up a script which would force an object to move through the stage until a particular point and than change direction. I wrote something like that:
onClipEvent (enterFrame) {
moveUp = function () {
this._y -= 1;
if (this._y<-30) {
this.onEnterFrame = moveDown;
}};
moveDown = function () {
this._y += 1;
if (this._y>600) {
this.onEnterFrame = moveUp;
}};
this.onEnterFrame = moveUp;
}
But it doesn't work. the object moves only one direction and does not change it.
I have a movieClip sitting on the first frame of my main timeline. When it gets to the last fram of the movieClip, I want it to go and play frame 2 of the main timeline. I have this code on the last frame of my movieClip:
[Code]....
It actually doesn't throw it just once, it keeps throwing it as long as my preview window is open. As if it just keeps hitting that frame repeatedly. Am I doing this correctly? Or is there a better way to do it in AS3?
i'm very new to Flash (although have plenty of experience in Java, C++, PHP, etc). For a University assignment, I am creating a World Cup Guide and i'm creating a countdown to the tournament. I've followed a tutorial and modified it slightly but i'm receiving an error message. The error message is:
[Code]....
I've been trying to run some functions in my class every frame and have come up with this code:
[Code]....
I get no errors, but the functions charactercamX and charactercamY are not running every frame.
I have 3 frames each with a movie clip called map_mc. Each different map_mc have different objects that call the CollisionDetect class. Heres whats happening. objects from frame 1 will start freaking out when I goto frame 2. How do I remove only the event listeners from objects only on frame 1?
I have been trying this.currentFrame but the problem is that all the objects are inside map_mc on the first frame so no matter what it will always be 1. On the other hand MovieClip(root).currentFrame will always give me the current frame but wont tell me what the objects frame is relative to the stage.What I want to do is have something to this effect:MovieClip(root).this.currentFrame would output that this object is on frame 1 and MovieClip(root).currentFrame will tell me that the stage is on frame 2 so I can remove the listeners accordingly.
any consise methods to restart a deleted onEnterFrame that has been deleted?
View 3 Repliesi have As code with functions on frame 1-6 i want on frame 7 to have a clear code that will remove all the functions from frame 6. I need only the AS code to be cleared on frame 6 no where else... so the functions that are there no longer work in the rest of the animation.
View 4 RepliesI have two frames in a movieclip with a stop in the first. I want a script that makes is so that when you hold down the UP or DOWN arrowkey it jumps to frame 2 but if you drop the UP or DOWN key you go back to frame 1.
View 1 RepliesI am writing an application for my students which plays music when buttons are pressed.I made the buttons myself and they have 4 states in 4 colors.The rollover and mousedown states work okay but I would like the button to hold its 'hit' or "mousedown" color while the sound plays, and then return to its normal state. This way, while the sound plays, the student will see its connection to the button label (rather than a screen full of buttons in the same state/color)
View 2 RepliesHow would i go about changing properties of a Combo Box?
There are two things I would like to change that differs from an orginal Combo Box.
1. Make it so some of the labels within the Combo Box are unselectable, yet are still displayed.
2. Make the colour of certain labels different.
I really just want to know how to trigger a function when my movie hits a certain frame.
I made a very simple flash show to try to illustrate my problem a little more clearly. I have a green and a gray button. Using the 'switch_buttons' command I turned the gray button invisible at the beginning. What I then want to happen is that on the 10th frame the green button will become invisible and the gray button will appear. But I haven't had any luck. It seems like I need to call a function to switch the buttons somehow.
I'm trying to use an if statement on a frame, but it doesn't seem to work do i need to put into some sort of function?
View 2 RepliesI want to change the color of a movie clip, and I've succeeded with the following code:
var my_color:Color = new Color(mc);
my_color.setRGB(0xFF0000); // mc turns red
Now, this is only the start. What I really want is that the color is changed via an external textfile (or similar).
I've gathered that this is possible with the LoadVariables function, but I can't seem to get it right. Does anyone have a solution for this? I'd also like to know how I should format the textfile code (should it be something like this: "&mc=0xFF0000"?)...
Im using a onInterval at a very high speed or you could say, with a very short delay. In IE the onInterval is not going by the time frame i set and is running extremely slowly. In all the other browsers the onInterval is working fine and runs the code as fast as i require. I found a post on another forum but that person had no luck with this issue as well.[URL] Is there a alternative way to call functions at a fraction of a second?
View 1 RepliesI have little and easy flash Only problem is - after the last frame of flashmovie should open new file/location (this time index2.html) but before that it dows the first frame is shown for a moment again. [URL]
Flash is built easily:
1st frame with action "stop();"
2nd - 34th with action "play();"
35th - with action getURL("index2.html", "_self");
im creatung a sort of virtual tv in flash 8, and ive come across a problem-0 I'll try to put this as simply as possible- picture a black square on frames 1-5, and a white square on frames 6-10. I need to be able to push a button, and if its on frame 1, to go to from 6, and if its on frame 6-10, to go to frame 1 (and stop) If possible id like to put the script on the button (not the frame)
View 2 RepliesIs there a way to make it so that when you press the right key your animation/game goes forward a frame and when you press the left key it goes back a frame? I have a pretty minimal knowledge of actionscript so I'm not exactly sure how it would be done.
View 2 RepliesIs there a way to store the number of the frame currently playing in actionscript, and then recall that frame number later?
View 1 RepliesI have frames with bits of audio. I'd like to click on a button (movie clip) and have audio from 2 separate frames play. Trouble is, they play on top of each other. What I need is a pause between playing the first frame and then the other.
Basically it looks like this:
Code:
gotoAndPlay(3);
// NEED TO PAUSE HERE ABOUT 750ms
gotoAndPlay(4);
I have to make a banner ad for my company's website that is 4 frames. It needs to play each frame about 3-4 seconds and then loop after 4th frame and continuously do so. It needs to begin this process when the web page is brought up without the user doing anything to it (so no clicking)And I have to keep it under 40k.I've found alot of tutorials for using external swf files and images but everything seems to use a button and I can't seem to get the coding down at all.
View 3 RepliesSay that i have a variable called explosion when this variable is set to yes i'd like it so that whenever you press the screen with the left mouseclick it "creates" a movieclip where you clicked that in the library is named bomb (or duplicate the movieclip from off screen if that is easier)
View 2 RepliesIs there a way to make it so that when you press the right key your animation/game goes forward a frame and when you press the left key it goes back a frame? I have a pretty minimal knowledge of actionscript so I'm not exactly sure how it would be done.
View 2 RepliesI am editing my website, a full flash site bought from Template Monsters and it seem there is a problem with screen resolution. When i publish the fla in flash only, it fits the screen exactly with no scroll bar but when i publish in html the flash content is bigger than screen size and menu bar stays outside the screen in the way that i have to scroll down to see menu contents and tabs.In order to make this site more user friendly I have tried to resize the screen to a smaller but seems to be not a good idea. I have also tried to use different .js and includes in order to solve the problem but still not giving the result i am looking for.
View 5 RepliesI have an as2 slideshow project that has 3 images that are accessed form the library. The movie consists of 3 frames 1) preloader 2) blank 3) slideshow script and some stage elements. All these images have been exported for AS and exported for frame 3.
Even so the preloader in frame 1 still only flashes up on the screen briefly before the slideshow starts. I have also set the flash publishing to "export frame for classes: 3" as I have read that this may help. This still does not help.
The SWF file is around 1.3MB in size and virtually all of this is being loaded prior to the preloader as the bandwidth profiler reports.
I have attached a link to the CS3 fla file in zipped format so you may test this for yourselves and possibly help me figure out what I am doing wrong.
[URL]
Is there a way to recall a variable from a previous frame? I have a variable that was mathematically calculated in frame 3, that variable was then used in a dynamic text field. The problem I am facing is that the text field then disappears in frame 4. The only solution I can think of is reposting the text field in frame 4 but I am having trouble recalling the variable from the previous frame.
View 4 Replies