Is there a way that, when exported as .SWF, my movie will play the first scene and then continuously loop the second scene.I only have two scenes to deal with and I'm trying to made something simular to a DVD menu that has a clip to get to the main menu that keeps looping and not playing the entrance clip.I don't have any buttons or any programming so far.
View 8 Repliesget a scene to loop twice (or perhaps three times) and then proceed to the next scene. I imagine I need a counter and an if statement but I don't know enough ActionScript to do it.
View 3 RepliesI have been trying to find the answer to this for a while now. here is what I have tried so far.First frame is var loops = 0 then I dropped this on the frame i want it to stop on after 3 loops, but it continues to loop.if (loops == 3) {stop();}All I want it to do is loop three times and stop on say frame 119 after the 3 loops.
View 5 Repliesive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
Check out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
I have an interactive flash application that I'm building, but it's gotten kinda large (~200k) because of one large png file. So, I want to build a preloader for it, but I seem to have some difficulty getting it to a) stop looping back to scene 1, or b) look good if I use stop();
for some reason, the folowing scene's moving elements look crappy if I use stop(); in it's first frame in order to stop it from going back.
I don't want scene 1 to continuously reappear, but stop messes with the moving elements in scene 2.
so I have some buttons that, as of right now, simply trigger the scene to move on while at the same time killing some particle effect animations I have spawning when the animation is idle. What I now need to do is make these events move on to a specific scene AFTER the rest of the scene's animation has played out (about 400 more frames) I'm figuring that the gotoAndPlay command has to be tied to some sort of timer variable that I would have to figure out based on my fps. Or maybe there is a way to set up a timer directly tied to a certain amount of frames allowed to go by. I'm pretty noob at actionscript, so keep that in mind. Here is the script at the point where the animation pauses to await user input on the buttons:
[Code]....
No..not that type of parenting ;DOK,I have a main scene, then sitting in the root scene I have 2 movie clips.1)centro2)fotoIn the first movie "centro" there is a menu btnI want this menu btn to call up mclarge + its frame (1) thats housed 3 levels inside the foto mc in root.
Main scene - (1) centro (banner which houses menu btn)
(2) foto_mc
- Main_boy_mc (<---works if menu btn houses in here)
[code].....
I have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesArgumentError: Error #2109: Frame label null not found in scene Scene 1. at flash.display::MovieClip/gotoAndPlay() at intro_fla::MainTimeline/intro_fla::frame606()[intro_fla.MainTimeline: :frame606:3]
View 3 RepliesI'm trying break down a large Flash project into smaller swf's using a Loader :
stop();
var reqA:URLRequest = new URLRequest("New_Inro.swf");var loaderA:Loader = new Loader();
function imageLoadedA(event:Event):void { addChild(loaderA);} loaderA.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoadedA);loaderA.load(reqA);
Some of these swf files are animations which have code that states :
MovieClip(parent).gotoAndStop("frameThree");
The first loader works but I cannot get that swf to move on to the next frame(frameThree) to load the next swf file
Instead I get this message
ArgumentError: Error #2109: Frame label frameThree not found in scene Scene 1. at flash.display::MovieClip/gotoAndStop() at New_Inro_fla::MainGuy_1/frame146()[New_Inro_fla.MainGuy_1::frame146:2 ]
I'm getting this error in the OUTPUT window, when I PREVIEW (COMMAND + RETURN) my SWF:
ArgumentError: Error #2109: Frame label nGallery_btn not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at BrookBrovazMusic004_fla::MainTimeline/pageSelect()
- The funny thing is that the SWF works the way I want it to. You can view it here: http://brookbrovaz.com
- I just don't like the idea that something's wrong, according to the OUTPUT window anyway.
[Code]...
the error is:
ArgumentError: Error #2109: Frame label instance121 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at Untitled_fla::MainTimeline/goLabel()
this is my code:
stop();
function goLabel(e:MouseEvent):void
{
[code]....
i am using a movie clip button to open a swf with a loader. hope i m not missing any information/other coding....
I've created a class which simulates an action for example a ball bouncing about a screen thus I'd create it like so:
Code:
var Ball1:ball = new ball(x,y);
How would I go about adding this to a loop, in a sense of every frame add another ball till you reach the maximum balls
currently after looking in help, google and forums this is all I could find
Code:
var ["Ball"+currentball]:ball = new ball(x,y);
but this doesn't seem to work and just causes
"**Error** Scene=Scene 1, layer=balls, frame=1:Line 15: Identifier expected"
I have created a new Flash file using A3.It has a menu system which all works, I have included trace code that outputs button pressed.So the next step is when the right button is clicked it takes them to the next scene. Please note I have coded it in AS3. When I compile it returns no error however at run time when I click on the buttomit returns the following error:
Menu 1, button 1
ArgumentError: Error #2109: Frame label contact not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at menuformason_fla::MainTimeline/itemButtons()
[code]....
The code below works fine in CS3. But I get the following code when I try to run it in CS4:
ArgumentError: Error #2108: Scene Scene 2 was not found.
at flash.display::MovieClip/gotoAndStop()
at
introActionscriptWorkFile_Scene1_fla::MainTimeline/gotoScene2()
Here is the code: (Note: "scene2Frame1" is a frame label).
When I place a FLVPlayback Object on scene 3 I get the following errorTypeError: Error #1009: Cannot access a property or method of a null object reference.atUntitled_fla::MainTimeline/__setProp_flv_promo1_Scene3_Layer1_0()atUntitled_fla::MainTimeline/frame1()
View 11 RepliesI have an eventListener on a particular movieClip that triggers the timeline to play when clicked. This should play through a short tween, then hit another piece of actionscript in the last frame of that scene, which should take you to the next scene. I also have an audio file loaded into a soundChannel, as well as a few timers that operate a click prompt over the movieClip already mentioned. My bug is that if you click on said movieClip before the soundChannel is finished playing, all functions properly. However, if you wait for the sound to finish, this initiates a few timers that cause a prompt to fade in, telling you to click on the movieClip. If you click on it, still, everything works fine. But once the timers complete their work, and the click prompt fades back out, the tweens do not operate properly. If you then click on the movieClip, the timeline seems to play doubletime until coming to a stop() action in the next scene.
[URL]
jumping from from scene to scene once the play head reaches the end in AS3? Scenes do not play one after another like they used to. Below is some code I found that works with errors, however I'm not using a MC like the code displays "mc1". Not really sure on how the MC fits in? import flash.display.Scene; var scene:Scene = mc1.currentScene;trace(scene.name + ": " + scene.numFrames + " frames");
View 4 RepliesI believe I'm not alone in this problem but I don't see any answers in any of the forums.I have a movie clip that has a button that I wish to take me and play my first scene at frame 1.I labeled my the 1st frame "startLabel" and my scene is named "mainScene", and that's where I want to go from my "button" that is placed in my "movie clip symbol scene".
[Code]...
I made a scene with movement and everything, but when I convert it to a symbol I lose the movement frames. I want to be able to import it as an object so that the animation loops for as long as I need it to in the other project.
View 1 Repliesis at all possible to load a movie at a particular scene rather than it launching into the first scene automatically? Or is this impossible?
View 1 Repliesi am making an animation, i have about 8 scenes. for some reason it starts playing the sound from the next scene in the middle of the current scene. why?? i checked movie explorer and the sound is in another scene. does that sound like a flash bug, or just me? it is a big file, could that be it.
View 4 RepliesI've created a game that involves 10 questions. Each questionis in its own scene. I've been racking my small brain trying tofind a way to copy the user's score from scene to scene and add (ordeduct) points based on whether the user answers the questioncorrectly or incorrectly.
View 1 RepliesI can get by and make nice flash sites, but I'm still learning what goes where and am still borrowing code to get by.I've laid the problem out in some detail as I am sure that will save a lot of questions later on, but feel free to ask if you want more info.Problem is as follows: I've built a two scene flash site using open source code for the preloader scene:[code]The main scrolling menu scene works great when it's a one scene movie and the preloader code works fine with a load of other sites I've built, but when I put them together on this site (the code for the scrolling menu precludes the addition of a preloader directly into that scene so separate scenes are a necessity) everything goes to pot.When testing the site (both as a standalone SWF file and when embedded in an HTML file) the preloader works fine and the main scene appears correctly, but when you click on any button to move back or forth along the menu/timeline it jumps and jerks along very roughly and stops short of its designated point.
This causes the whole scene to fail as the designated timeframe for each button contains a movie instance that won't function until the specific timeframe is reached.It's odd behavior and I'm stumped as both chunks of code work fine separately.I've even tried a much simpler preloader that doesn't display percentage or anything, it just cycles between frame one and two until the movie loads and then plays it (just like this one, but with no bells or whistles).Unfortunately my lack of actionscript knowledge prevents me from even finding a simple term to sum up the problem so I've failed to find any similar issues on any forums or Google.
When I place a FLVPlayback Object on scene 3 I get the following errorTypeError: Error #1009: Cannot access a property or method of a null object reference. atUntitled_fla::MainTimeline/__setProp_flv_promo1_Scene3_Layer1_0() at ntitled_fla::MainTimeline/frame1()
View 1 RepliesI need the video (scene 1) after play & stop will automaticlly go to scene 2. The scene 2 is a rotate images and will stay all the time to rotate in scene 2.
import fl.video.VideoState; import fl.video.VideoEvent; var foo:ExtendedFLVPlayback = new ExtendedFLVPlayback(); foo.skin = "SkinOverPlayMute.swf"; foo.startMuted = true; //set this to false, or not at all to start it unmuted foo.source = ""; foo.autoPlay = true;
[code]......
I'm making a Jeopardy game. When someone clicks on the button with the dollar amount on it, I have it reset to a different scene on the button so the players know it has been used. When another button is clicked, the first button resets back to its original dollar amount, rather than the blank scene it was reset to.
View 10 RepliesI'm creating a demo presentation that uses imported MP3 audio and static images basically panning around - simple stuff. I have it broken down into scenes to be more manageable. So at the end of a scene, I'll have this line:
gotoAndPlay(1, "Scene 2");
Which works just fine.
The problem is during the playback of the SWF, I get odd skips, generally at the beginning of a scene. Is this expected when using multiple scenes? Is it possibly something to do with the audio playback? I'm trying to make sure the MP3s do not start at exactly the beginning of the scene, but I'm still getting the problem.
Also, are there any tips on including MP3 audio to make things smoother? I'm running at 18 FPS.
I have four scenes, it loads on the first scene. I click the button which sould go to scene four but it goes to scene 2.
View 2 Replies