I am trying to load a file into flash cs4 that was created in flash cs3. The file is from a site that explains how to make a slideshow. When I load it I get all sorts of errors. I tried other files and got the same problem. One error said that the variable arguments were wrong
View 1 RepliesI'm using Flash Develop to build an as3 application using the Flex compiler. In the constructor of a particular class I have written the following code
Code:
//constructor
public function Test(par1:int, arr:/*int*/Array = [1, 2]){ <----- compiler shows error here
[code].....
I have an actionscript file,it has a package name,it locate C:demo directory,like follows:
package demo{
import flash.display.*;
public class ABC extends Sprite{[code]............
Then I compile above code like following command,but it raise following error:
C:>mxmlc demoABC.as
Loading configuration file C:sdkframeworksflex-config.xml
C:demoABC.as: Error: A file found in a source-path must have the same package structure '', as the definition's package, 'demo'.Where is wrong above command?
I have three movieclips, imported as part of a FLA file from inDesign. There are 3 frames in the movie labeled, page_one, page_two, and page_three There is one movieclip on each frame labeled as follows:
page_one had movieclip spread_one
page_two had movieclip spread_two
page_three had movieclip spread_three
there is actionscript on each frame:
on frame 1, (label page_one):stop();
spread_one.addEventListener(MouseEvent.CLICK, moveme1);function moveme1(e:MouseEvent):void{ gotoAndStop("page_two"); }
on frame 2 (label page_two):
stop();
spread_two.addEventListener(MouseEvent.CLICK, moveme2); function moveme2(e:MouseEvent):void{ gotoAndStop("page_three"); }
on frame 3 (label page_three):
stop();
spread_three.addEventListener(MouseEvent.CLICK, moveme3); function moveme3(e:MouseEvent):void{ gotoAndStop("page_one"); }
when I compile in flash, it works.when I compile in air 2.6 I get this error after I click on frame 3 (page_three), in spread_three:
TypeError: Error #1009: Cannot access a property or method of a null object reference. at objecthood_fla::MainTimeline/frame1()[objecthood_fla.MainTimeline::fr ame1:5] at flash.display::MovieClip/gotoAndStop() at objecthood_fla::MainTimeline/moveme3()[objecthood_fla.MainTimeline::f rame3:8]
[code]....
I created another 3 page test spread in inDesign, with only a rectangle on each page and exported as FLA.I used the same code as above and it compiled fine in both air and flash.
i am creating a web site and when i compiled my flash code so it writing that
TypeError: Error #1009: Cannot access
a property or method of a null object
reference. at
[code]....
I have a project with 430+ as3 classes, which we have been developing for a year.
For about a month now, sometimes the FLA won't compile, and no error or warning will be displayed. When I publish the movie, it takes about 60 seconds to compile, but when it's finished, the swf file produced it's only 1,1KB (instead of 850k which should normally be) and I get absolutely no Compiler Error or warning.
Sometimes, if I delete the ASO files and recompile, it works fine. Other times, this won't do it and I would have to quit Flash and open the project again. I have "Compress movie" and "Reduce file size and increase performance" set to false for nearly 2 months now, because I read somewhere that Flash can have trouble with projects using hundreds of classes (this actually helped).
Last week however, I cannot get it to work. No matter what I do, it won't compile. I try to delete a whole bunch of code from the Main class, get it to compile fine and then add a few lines each time, only to see that any random line of code can make it stop compiling again.
I have a problem and I don't know where to start debugging it.I have some buttons with rollovers and I'm using strings to try and automate localization.All the buttons have two frame with the same text in each frame, but with a different color applied. I use the same ID for each frame as the translations will be the same.When I compile the movie I get this error
butIntroHow, Line 151086: Syntax error: expecting semicolon before rightparen.
from the button. I haven't any action script attached to the button, so I presume at compile time some code is added to deal with localization.
I'm getting this error when compiling a newly created application with SDK 4.1:1017: The definition of base class Application was not found.I can click on the SDK library path in the Flash Builder Explorer and navigate to the spark->components->Application object.
View 1 RepliesI was looking at a game engine code and I tried to reproduce myself but I got a compile error.Main.as
package {
import flash.display.Sprite;
public class Main extends Sprite
[code].....
I started a project in Flash CS4 using Actionscript 3.0 and targeting Flash Player 10. Later, I was told it had to target FP9, so I knocked it down, and then started receiving this error:
1046: Type was not found or was not a compile-time constant: Vector.
I have an actionscript file with a class defined, and I am trying to define an object for that class in another actionscript file but I keep getting a compile error that says type not found.[code]
View 5 RepliesI am working on a AS3 file called Main using Flash CS3.When testing the movieclip, the compiler showed an error on the line:import flash.display.MovieClip;The exact message is this:1046: Type was not found or was not a compile-time constant: TextField.import flash.display.MovieClip;The code I used is rather short. It is shown below:
ActionScript Code:
package
{
[code].......
I'm using Flash Pro CS5. My FLA file's code says
#include "myasfile.as"
myasfile.as holds my code, and starts with "@estr = function ()" When I go to export movie, I get "myasfile.as, Line 1 unexpected '@' encountered" Why do I get this message?
Word to the Flash Genies-- Heres my wish that hopefully someone else is struggling with an enormously mind-boggling bug in flash cs3-- when I try to create a public class that extends any of the native flash display objects, and I put this in its own package, even after specifically importing the specific class OR the package wildcard .* the fla that I'm compiling returns error 1017-- Base Class Definition not found. The fla is set to the correct classpath. This situation slipped from 'minor annoyance' to 'mind boggling' after I moved the directory to a different pc with cs3, reset the local classpath and it compiled perfectly. So then I moved the directory to a mac, running flex builder, and made a tester file to use the class, which compiled perfectly.
For some wierd reason, this particular computer cannot compile, even though nothing had changed in the actual class. Maybe it is important to note that this machine is running Vista (and perhaps should not be!)? Maybe it is important to note that the package is part of an SVN directory? Maybe it is important to note that after re-saving the same class file, changing only the class name (from BitmapSprite to BSprite) enabled it to compile on this machine, even though both the mac and other pc (running windows XP) could compile the class as BitmapSprite. I'm not sure if the name change or just re-saving allowed it to compile--but maybe it's significant that the new named instance was not committed to svn.
I have a character added as Child in the Main Time line and i am trying to make a class for that same char to control it, but as soon as i start it gives me this huge annoying error that says It has a compile time-constant error in the
private function checkKeysDown(event:KeyboardEvent):void{
Full class code below
Code:
[code]....
This is my first time using flex. I tried compiling thecripts below usingmxmlc example.mxmlAnd I get:Error: Type was not found or was not a compile-time constant:UIMovieClipThis is on a windows machine. If I type just "mxmlc" I getthat I'm using version 3.1
View 17 RepliesI have a symbol with name and class name "cat". I also have buttons with names and classnames of values "upButton" "downButton". I dragged the symbols onto the stage and gave them instance names of "cat", "upButton", and "downButton", and tried to control the position of the cat using the buttons, however I got the error message:
"type was not found or was not a compile-time constant"
So I tried changing the name of the instances to cat2, upButton2, and downButton2, and it works perfectly fine. So am I not allowed to have instance names identical to the class name? This is strange because in the book I am working out of, the instance names are identical to the class names.
I am trying to create a a menu (eventually on two rows of three buttons) Here is code so far:
the pages are on timeline at 10, 11 12 ( 13 14 15.)
Code: Select all
stop();
var menu_label:Array = new Array("Homepage","Projects","About us");
var total:Number = menu_label.length;
[Code].....
getting this error: 1046: Type was not found or was not a compile-time constant: TextArea.
View 3 RepliesI am a release engineer in a development who is writing flex/air application I have no previous experience with flash in the past, and I am asked to generate flex doc using asdoc this is the error I am dealing with
[exec] C:uildRim2GclientRimProjectCommonuild.tempasdoccomamdocsframeworkcomponentsSimpleFluidListContainerBase.as(150): col: 38 Error: Type was not found or was not a compile-time constant: Event. [exec] protected function onResize(event:Event):void [exec] ^
My question is: where is event type defined?
Here's my asdoc command line
asdoc.exe +configname=air -source-path <my source dir> -doc-sources <my source dir> -source-path %FLEX_HOME%frameworksprojectsframeworksrc -library-path <my lib path> -library-path %FLEX_HOME%frameworkslibsair -library-path %FLEX_HOME%frameworkslibs -output <asdoc output dir>
1046: Type was not found or was not a compile-time constant: Event. On lines 60, 67 and 76. Changed font color to red on those lines.[code]....
View 2 RepliesThe error is: 1046: Type was not found or was not a compile-time constant: MouseEvent.
Code:
package {
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import flash.net.NetConnection;
[Code] ......
I'm trying to use the Flex 4 SDK's mx.rpc package in a Flash application.I imported Flex's rpc.swc (AdobeAdobe Flash Builder 4sdks4.0.0frameworkslibs pc.swc) into my project by adding it to the list in Flash's "Publish Settings/Flash/ActionScrip 3.0 Settings/Library Path". It seems like I have access to the classes, however when I compile I get this error:
1046: Type was not found or was not a compile-time constant: [mx.rpc]::IResponder.
There's no location or line for the error either.
I'am using flexmojos-maven-plugin to build my Flex module. So on the compile phase I'm getting org.apache.maven.plugin.MojoExecutionException: Error compiling!with no information on where (at what source file) the error happens and what is nature of the compile error.
View 2 RepliesIm a new user to AS3 and I have no former programming expirience. Im learning to develop games using a book specially made for those with no expirience. However, i keep getting this error:
[Code]...
Scenario: Click on button and timeline animation plays (the animation is a panel that rotates from the back to the front) Error: Scene 1, Layer 'actions', Frame 1, Line 11 1061: Call to a possibly undefined method play through a reference with static type Function. What does this error mean and what code needs to be added to fix it?
Code: Select allimport flash.events.MouseEvent;
bullet_btn.addEventListener(MouseEvent.CLICK, bullet);
function bullet(event:MouseEvent) :void
{
spinbul_pt_1.play();
}
function spinbul_pt_1(){
bul_pt_1_MC.play();
}
If some of you have worked with the wiiflash server? I wouldn't mind some insight, such as what is Synchronize object? Although it is in all the example file I have found so far, I get an error: Error #1046: Type was not found or was not a compile-time constant I am basically trying to target on the stage with the wii (get some "abolute position with sensorX & sensorY")..As well I have found only a little documentation so if you can please send me some more links, that wouls certainly help.
View 2 RepliesI am trying to figure out why when I run my fla it comes up with fl.video.FLVPlayback not found and fl.video not found.I rewrote the file, and the script assist even helped with the words and they still could not be found.However, I have one that I previously wrote that does just great with the FLVPlayback.Do you actually have to have loaded something in before trying it out or what? I even reinstalled CS5 to see if I had lost something but it still happens.
Here are the errors I get.C:Documents and SettingsRobertDesktopHere Be DragonsFlash DepthMyDragonFlight.as, Line 9 1046: Type was not found or was not a compile-time constant: FLVPlayback.C:Documents and SettingsRobertDesktopHere Be DragonsFlash DepthMyDragonFlight.as, Line 9 1180: Call to a possibly undefined method FLVPlayback.C:Documents and SettingsRobertDesktopHere Be
[code]....
I have been getting this error004: Namespace was not found or is not a compile-time constant error and it just does not seem to go away.I am using Coordinate geometry principles to find out the intersections points. I am storing the slopes of the lines and intersection points as arrays. This is the code I am using.
package {
import flash.display.Sprite;
public class AngryBubble extends Sprite {
[code]......
Scenario: Click on button and timeline animation plays
Error:
Scene 1, Layer 'actions', Frame 1, Line 11
1061: Call to a possibly undefined method play through a reference with static type Function.
What does this error mean and what code needs to be added to fix it?
[Code].....