I'm trying to find out if there is a way to get an animation to stream in the background and not reset or change when there is a frame jump or scene change. I just want it to become the permanent background.Kind of the way a sound can be set to loop and stream non-stop so long as you don't go back to the frame in which the sound started.
View 3 Repliesso I have some buttons that, as of right now, simply trigger the scene to move on while at the same time killing some particle effect animations I have spawning when the animation is idle. What I now need to do is make these events move on to a specific scene AFTER the rest of the scene's animation has played out (about 400 more frames) I'm figuring that the gotoAndPlay command has to be tied to some sort of timer variable that I would have to figure out based on my fps. Or maybe there is a way to set up a timer directly tied to a certain amount of frames allowed to go by. I'm pretty noob at actionscript, so keep that in mind. Here is the script at the point where the animation pauses to await user input on the buttons:
[Code]....
I'm developing a Flash-only application and I want to integrate the flowplayer directly into it, but not on the webpage using some swfobject-like approach.So, at some moment (for example, when arbitrary event fires), I would like to add the flowplayer object to the scene so that it starts streaming the specified video.[URL]
View 1 RepliesThe website I'm working on is a Flash swf hovering at about 2 megs, and although on a broadband connection, it still takes a few long seconds - Is there any actionscript that can tell my preloader to display my homepage immediatley after the homepage is loaded, while the rest of my site loads in the background?
stop();
//preloader
st = new Date();
[code].....
I have set up ma flash project to have various scenes. One of these scenes is a page whereby when a user clicks on a button he/she can change the background image on every scene in my project.On each scene i have made a layer called 'background' and drawn a black rectangle which is the default background. This has been converted to a graphic using F8.What i'd like to be able to do is when the user clicks on the button he/she can change this default background to 1 of 4 photo's i have in my library.i have tried the code:
on (release)
{
colorchange = new Color("/rectangle");
[code]......
I have one scene linked to another through a button, when I click on the button that links to scene two it takes me to the scene but doesn't play the animation it just shows the non animated components. Is there something really obvious I am missing here because if I go to the scene (when I am not testing the movie) the animation works perfectly.
View 1 Replieswhen I call the first scene. The problem is I have several different files and each on each one the first scene has a different name, so I have to call it with a generic code.... for example [CODE] if (currentScene == scene1){ doSomething() }; [/CODE] where scene1 can be "Scene 1" "scene1" "scene 1" and etc....
View 2 RepliesI am using the video component with AS3. I have an external flv which loads nicely...that's fine. Now I am looking for a way to remove a preloader animation once the video starts streaming. The preloader is just an animation without a status (percent) bar. In plain English the code would be: if flv file is streaming, fade preloader animation I am also noticing that the first frame of the video shows while it's loading...is there a way to change it so that nothing is seen until streaming? If worst comes to worst I can always make a mask.
View 1 RepliesHow to port Away3d scene with animation into PV3d? Are there any tutorials on how to do that?
View 1 Repliesive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
I have linked a button to another scene, in whic the second scene automatically plays some animation. I want to create a button on this new scene, after the animation has finished, which reverses the animation and then automatically goes back to the original scene. I have this code:
[Code]...
I was given a flash file for the header of a template site, but I am unable to change the movie/scene. No matter what changes I make when I test scene/movie I am not seeing any changes I have made. Even if I hide all layers and save when I test the scene nothing has changed. the only flash work I've done is making a banner that fades to different images.
View 2 RepliesCheck out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
I'm having a huge problem with my Flash file; here is what I'm trying to do and whats happening:
I have a scene where with a movie clip that is controlled by the keyboard, when it hit a certain point of the stage it opens a new scene where a certain animation should happen.
The problem is every time the animation hits that certain point the code I was using continues running and flash shows me an error message.
Error message:
How can I make this code work only on the scene its placed so I won't get this ERROR?
Here is the code I'm using:
I just created my first animation of a plant "growing up", following the tutorial here: http:[url]..... It worked wonders: I basically drew a few lines, transformed it to symbol, created a new mask and script layer, and just used a brush to cover a part of the image on every frame in order to give the illusion of appearance. However, I don't need a background, I just need to cut the animation and make it an independent SWF.
View 8 Replies[URL].. I am a graphic designer and I am relatively new to Flash and I would like to animate a background like this 3D simulation that triggers when clicking on any of the buttons below that I want to achieve,Should i use Swift 3D? what kind of action script does the programmer uses to acheive this effec?
View 1 Repliesi made a full site all based in flash and divided the pages in scenes
i need a button to do exact that. when u click the button it must play some frames and then go to other scene.
i can't tell to go to other scene in the last frame because there are a lot of scenes and buttons that have to do the same.
15 buttons - 15 scenes - play 30 frames and then change the button-scene!
I got 12 scenes on my file and all of them are running on actionscript 2.0 engine. I import a new scene but it requires a actionscript 3.0 engine. is it possible to change the actionsript on a particular scene?
View 1 RepliesI just wanna change the scene when i press ENTER key, but it seems people have tons of ways and it doesn't work out well, this is what im doing:[code]And it doesnt work, this is the error report:1061: Call to a possibly undefined method addEventListener through a reference with static type Class.1061: Call to a possibly undefined method keyDown through a reference with static type Class.
View 9 RepliesI have a video player in a multimedia presentation I am building in Flash, which is almost complete and just having one problem. When I change the page (scene change), I can still hear the audio form the video. The Video is still playing, how can I stop this?I was thinking if I added a stop function to all the buttons that link to different pages, but I don't know how to refer to the FLVPlayer. Somethink like
Bio_btn.addEventListener(MouseEvent.CLICK, StopVideo);
function StopVideo ????????????????{
???????????????();
[code].....
I want to make an interactive flash file, and the way I want to have it layed out is that a steady animation will play in one layer, while being able to jump around in frames with events such as a mouseover.I'm going to give a generic example, this isn't what I'm going to do, but it gets the point across.Theres a house and a tree. The leaves on the tree are falling, and upon mouseover of the house door, the door will open. Yet the leaves will remain falling (without skipping frames in the animation) while the door is still opening.How do you do this without using a goToAndPlay(x) or such that jumps the whole animation?
View 11 RepliesI want to make my animation have a transparent background instead of a blank background so that it can blend with my presentation. Is it possible to create the movie like this?
View 7 RepliesI have an artist I'm paying to do animation art for me. I need PNGs for each frame in the animation but she is most comfortable doing her animations in Flash. It sounds like getting the frames for me will be difficult for her. She was able to do the still art we needed and give us that as a frame, but for some reason the animation is different? Keep in mind we need PNGs with full transparency support in the background. We can't be clipping these frames out by hand.
View 1 RepliesHow to achieve this background animation/interaction [URL]. I am making a personal website in as3 and i would love to have something like that..
View 2 RepliesI found a tutorial online that showed me how to create a looping background animation (falling leaves) but the code is in Actionscript 2.0. I am in the process of trying to covert the code to Actionscript 3.0 but there are still a few things I'm having trouble with (i.e. setRGB, duplicateMovieClip, etc).
Code:
leafNumber = 30;
for (i=0;
i<leafNumber; i++) {
newLeaf = leaf.duplicateMovieClip("leaf"+i, i);
newLeaf.x = Math.random()*Stage.width;
[Code] .....
I am trying to make a flash movie and have it find a external movie to show. I also need to be able to change the location of the video without flash, so I think I have to use a seperate .as file.
View 6 RepliesIn a certain part of my movie i want it to go from scene 1 to scene 3 but for the life of me i cant remember what the script for that would be, and i figure since it was AS 2.0, its changed by now, and in scene 3 i want an mc that has sound in it to be muted but not the whole movie.
View 1 RepliesI am editing code on a previously made site and was wondering if there was a quick way to load an external pdf once you hit a certain frame.They currently are loading an external swf. I just want to take that out and add in a pdf.[code]
View 2 Repliesi made a full site all based in flash and divided the pages in scenes
i need a button to do exact that. when u click the button it must play some frames and then go to other scene.
i can't tell to go to other scene in the last frame because there are a lot of scenes and buttons that have to do the same.
15 buttons - 15 scenes - play 30 frames and then change the button-scene!
when 2 objects collide scene change?i was wondering if there was a way to change the scene when two objects collide in action script 3?
View 5 Replies