I am trying to stream a MP4-file from the VOD-folder using the videoplayer in flash. I can play the sample-file without any trouble, but when i try to use iceage.mp4 as source, it don't find the stream.[URL]..
View 2 RepliesI use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesI have success full installation of Flash media server 4 in my linux machine.I am in need of stream the .mp3 file over network.
View 4 RepliesI've two problems with the streaming from a flv-file from a FMS2. First, when I stop the stream (pause) and want to restart it i have a small jump in the stream. Second, how can I detecting the end of the stream/file? Here is my code:
[Code]....
I recently installed FMS 3.5.1 and then upgraded it to 3.5.3 on a Windows 2003 server. In both versions, I can not stream .f4v or .mp3 from a subfolder. The .flv file plays fine. I used the default configuration settings, sample .f4v and .flv files provided by the installer. I used the sample player in C:Program FilesAdobeFlash Media Server 3.5samplesvideoPlayer as the client.
[Code]...
I have a FMS set up and when I do a normal video stream I use an address like [URL] So I want to make it so that I can stream from sub folders in the VOD file like [URL] This doesnt seem to work.
View 13 RepliesCurrently we have a swf file application that runs in a browser and takes the live video stream from the camera on the computer and streams a live sorenson spark stream to the fms 3.5 server.
Question is: How to live stream vp6 from the browser/swf file on the camera computer, instead of the sorenson spark. (We seem to be stuck only on sorenson spark).
Flash Media Server (finally) supports multicast video. But documentation about this feature is about multicasting live video
View 1 RepliesI watched two videos by Jody Bleyle:
1. [URL]
2. [URL]
In Video 1, she shows how to stream a single file. I've done everything to the letter on this video, however, when she uses the videoplayer to reference the livestream.f4m file, there is none. I've actually checked the folder location(apploications/livepkgr/streams/_definst_/livestream and there are files in there (.f4f and .f4x), but no .f4m which is the file she references in the video player.
In Video 2, she shows how to create a multi-bitrate video stream. Using the manifest packager and creating a .f4m and .m3u8 package and placing it in the webroot folder. Here is the contents of my liveevent.f4m file:
[Code]...
I'm trying to append a live stream to an existing file, but I cant figure out how to open the existing file and then append the live stream. This is server side as well.I know I need to open the existing file using stream = stream.get("file"). but I don't understand how to associate stream with the live stream coming in.
View 8 RepliesWe have some HTML pages that embed a swf file to stream flv videos. The video doesn't play and I firstly thought it was the video player's version problem. But it seems more to be related to the path now.
[Code]...
Are there any way that Flash Media Server isn't able to pass metadata of F4V file into the stream (RTMP) if F4V file was encrypted with Flash Access?
View 1 RepliesI have successfully been able to write some client-side ActionScript that allows me to record my webcam and mic data to my FMS server. The .flv files get saved to a directory under the applications directory. However, I need to process those flv files for a web application and would like those .flv files to be saved to the web app's directory (outside of the FMS application directory). I have tried changing the <Streams> tag in the Application.xml file that I placed in the FMS application directory, but that simply did not work.My goal is simple: to save the recorded stream data outside of the FMS application's directory. I have been going crazy trying to do this, but would like to know any pointers that any of you experts have. Can this be done? If not, how can I execute a server side PHP script after the stream is done recording. I know about using the exec() function in PHP, but am unsure as to how to execute that script via client-side actionscript.Here is the path to my FMS server (Linux OS) installation and the application directory. The application name is "ngale"./opt/adobe/fms/applications/ngaleHere is the path that my client-side ActionScript is placing the .flv files of the recorded streams/opt/adobe/fms/applications/ngale/streams/recordings/Here is the path to my web application/home/user/public_html/dev.ngale.net/public/Here is the path that I would like for the .flv recording files to be saved to/home/user/public_html/dev.ngale.net/public/audio/.flv
View 5 RepliesWhat file should android devices use to view a live video stream? myeventname.f4m? I'm using the following html5 code and it's not working in Android devices.
<video id="liveWebcast"
poster="poster.jpg"
src="[URL]" controls autoplay>
</video>
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesProblem1 The ***.stream file is not being created in the folder> :FMSHOMEapplicationslivepkgrevents\_definst_liveeventBUTI can see the F4F, F4X, control, meta, and bootstrap files being created in the folder>C:FMSHOMEapplicationslivepkgrstreams\_definst_livestreamAny ideas on what may be causing this and how to resolve it?Problem2Sometimes if I send multiple bitrates like livestream1, liverstream2, livestream3 I'll only see the livestream3 stream files created inthe folder C:FMSHOMEapplicationslivepkgrstreams\_definst_livestream3. No livestream1 orlivestream2 stream folder/files are created. And again the .stream file is not being
View 1 Replieswhen i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Repliesclose another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesOnly just getting started on this whole domain of learning, so go easy!If I set up a P2P video/audio chat (similar to the sample VideoPhone thing on the Cirrus site), can I get the stream from both parties to send to a server at the same time so that I can record it? If so, would I have to use a FMS to stream it to and perform the recording (and if so which version could I get away with)? Are there any (preferably free, or just tutorialised) solutions for the recording side of things?
Currently it seems like the only option for doing the P2P thing is to use Stratus/Cirrus unless I use FMS4 Enterprise.
how effective this kind of situation can be, in terms of quality of the stream and recording? Does any of this make sense?
I've had FMS running on my local machine for a while and have had a little experience writing FMS apps, but I've just tried recording audio for the first time using the standard vod application and I keep getting a "Write access denied for stream" error. My AS3 code is copied and pasted for various examples and am confident that it works.
I'm running Windows XP service pack 3 & FMIS 3.5.
I've had a look at the vod/media directory and under windows->properties the read-only attribute is ticked. Every time I un-tick this it reverts back to being ticked. I've googled this and MS say that most programs ignore the read-only attribute and that it only really applied to files. I've also tried the MS fix for setting the read-only attribute via cmd and still no joy (doesn't fix read-only attribute or FMS recording the audio after setting via cmd).
I've also tried our dev server install of FMS (running under linux) and am getting the same results.
Here's my AS3 code...
private function initApp(event:Event):void
{
removeEventListener(Event.ADDED_TO_STAGE,initApp);
[Code].....
i test the fms 4 update 1 rtmfp streams multicast after 10 minutes i get this message RTMFP Multicast stream has exceeded max duration allowed; closing stream. but i do not use IP multicast
[Code]...
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 RepliesI'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
I'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
Can I re-stream a stream from wowza to fms 4.5?I have a wowza stream with the url similiar to URL... Is it possible to restream this to fms 4.5?
View 3 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesI'm trying to setup a server-side playlist for playing back mp3 files, though I stumble into a weird FMS behaviour. I'm using latest FMS 4.0.2 Here is how I try to publish the stream (Server-side ActionScript):
[CODE]....
On the client side, I try to play it using NetStream.play("boo"). Though, the sound quality I get is really weird. The sound goes slower and faster and stops for a split of a second. It may play properly for a couple of seconds, but that's all. Sounds like a decoder problem to me, or a bitrate conversion problem. When I play the stream with NetStream.play("mp3:rhcp") the playback goes smoothly. I've tried several mp3 files with different bitrates, but they all have the same problem.
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 Replies