Following the code shown in this example (Examle 6):
var ds:DynamicStream = new DynamicStream( myNetConnection );
//The first item in the playlist
var dsi:DynamicStreamItem = new DynamicStreamItem();
[code].....
I am using the new Dynamic Streaming classes with AS3 and FMS 3.5. I am storing four different streams in different locations on FMS. Because I can only identify one URI, how can I pass the different paths for each of the F4Vs?
Example in brief:
private var _nc:NetConnection;private var _ds:DynamicStream;private var _vidDisp:Video;private var _connClient:ConnectionClient;
private var _uri:String = "rtmp://myserver.com/vod";private var streamName:String = "MyString";
var dsi:DynamicStreamItem = new DynamicStreamItem();_ds = new DynamicStream( _nc );
_ds.client = _connClient;
[Code]...
I am streaming pre recorded audio files (mp4) to an AIR client. I have tried two different solutions,
streaming the file directly with the NetStream.play("mp4:xxxxx.m4a") and creating a server side playlist, adding the same sound clip and then streaming the playlist. The problem is, when streaming the playlist i get a few NetStream.Play.InsufficientBW, this does not happen when streaming the file direct. Both solutions uses bufferTime=1.0
I would like to use a server side playlist to implement a simple key solution so that the client dont know the full path to the file, but instead sends a key to a custom server side function that looks up the file path and creates a stream for the client.
The $995.00 version is listed as not supporting server side playlists. Is it possible to implement internet TV station like functionality using that version? I would like to have a list of files to play out and have it so those connected are all viewing the same thing.
View 1 RepliesI am generating a playlist server-side but am having problems when I try and scrub it on the client-side.Here's the contents of main.asc of my application:
application.onConnect = function(client) {
this.testStream = Stream.get("mp4:testplaylist");
this.testStream.play("mp4:test.f4v", 9, 16);
this.testStream.play("mp4:test2.f4v", 11, 10, false);
[code]...
The client calls "getStreamLength" to get the length of the sequence from the server; I do this in order to set the length of the scrub bar correctly.The problem is when I try and scrub - both forwards and backwards - it doesn't work; the stream just pauses then picks up where it last stopped, regardless of the position of the scrub bar.Is it possible to scrub a server-side generated playlist using Flash Media Server?I am using both Flash Player 10 and 10.1 and version 3.5.3 of Flash Media Server.
i have a problem with my server-side playlist. I have three incoming live-streams from the FME:
/*
clientStream = Stream.get("New_Stream");
clientStream.play("live1", -1, 10, false);
clientStream.play("live2", -1, 10, false);
clientStream.play("live3", -1, 10, false);
*/
I want that every stream is changed every 10 seconds and that the complete playlist starts again after the last stream was played. So far it works but only for three times. Then the messages "NetStream.Play.Stop" occurs.
ake a script on my server FlashMedia who plays my playlist xml loop. The script works for the first reading of the playlist but I do not know how to play it at infinity.Can you add my script?
application.allowDebug = true;
Define events on application start
application.onAppStart = function() {[code].........
normal I stream a livestream from Fme to a Fms and than to 2 cdn´s like justinTv. Now I´ve got the problem that i want to change the Script that it streams Viedos to the CDNs. Thats the Script I use right now to push the livestream:
var nc1=null;
var nc2=null;
var ns1=null;
[Code]....
So recently I have found issues with switching when playing playlists in a player we are developing. So to trouble shoot I built a simple application with buttons to manually switch. The first video in the stream switches just fine. When the player gets to to the second video in the the stream, switch does does not work either with or with out oldStreamName defined in the NetStreamPlayOptions. What happens is the the stream ends prematurely, a few seconds to a few minutes after the the button to switch is clicked. If I just let it pIay with out switching it plays out the whole stream as intended. I can't find any reason for this not to work, so I am wondering if there is an issue with the server.
View 12 RepliesI download the Flash streaming server and install it its work fine.I want know about the following question: how to stream the video using playlist? What is the format of the playlist? can i create a playlist from visual studio.Net and pass the value to the player?
View 1 RepliesI have just successfully installed Adobe FMS on my server. I would now like to know how to program a script to run a continuous live stream, of MP4 videos, from an XML playlist.
View 20 RepliesI have an application, what playing server side playlists. The problem is: in the player (FLVPlayback) the videos with different aspect ratios displaying with the aspect ratio of the first video.
View 2 RepliesAs stated above, I wanted to know if I can take a video playlist, say with 4 clips, and have FMIS create a separate file out of the 4 individual clips. Specifically, a user selects 4 (or any number) of clips to create their playlist, then at the end, a 'full length' file is created. If this isn't clear, let me know and I'll try to elaborate.
View 2 RepliesSo I've built a player to play playlists and it uses my own DynamicStream class (not the abobe one). I've ran into an issue with playing the same video multiple times. In this app there will be many occassions when a video may be repeated in the playlist up to 3 times. Here's an example of the problem:
Lets say I have 2 videos in a playlist and they are the exact same video. They both are the low birate version. The fist video dynamically swiches to different bitrates seamlesly as planned. If I fast forward the stream to the begining of the second video it starts playing and if my bandwith is ok it wants to switch to a better bitrate. It swiches but instead of being seemless it plays the second video from the begining again. So, I'm thinking this is where oldStreamName comes in. So I add the oldSteamName and make sure its correct, but the problem with that is if the same video is in playlist more than once then the transition never even happens.
I'm doing a project like youtube. After some try, I can run FMS, dynamic playlist and flowplayer (I think this is what I need, am I right?) However, when I try to combine them, I discover a lot of problems. I follow this [URL] beginner_dynstre am_fms.html to learn about FMS, this [URL] to learn about dynamic playlist, this [URL] to learn about flowplayer. In the tutorial, the dynamic playlist cant run with FMS (even the tutorial says can, but when I try it, it cant!), and it is using Flash and as(AS3), the flowplayer is using html and js, I really cont know how to combine these 3 things together.
View 2 Repliesis there a way to define a client side playlist like this:[code]but instead of a single videofiles for each playlistentry use dynamic streaming?I know how the DynamicStream class is working and how to set it up but i can't find any information if it is possible to combined those two techniques.
View 1 RepliesI have a series of mp4 videos (H.236 @ 22 fps) streaming from an akamai FMS serve via RTMP protocol in flash player 9+ with AS 3.My goal is to create client side playlists that smoothly switch from one stream to another. I am creating these playlists using a series of netStream. play (filename,start,len) methods. If I don't use an offset for the start parameter, then the stream switches smoothly from one video to the next with not noticeable jump or jerkiness. However if I introduce a start offset, say a few seconds in, I start to see a quick little hiccup or pause between the seams as it switches from one playlist stream to the next.
View 1 RepliesIs there a way to create videos in a playlist that i can limit the views to 10 videos per user?
View 1 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 Replies
