I have tried to put main.asc sample file on my live application, removed main.far file and restarted my FMS, after that, i couldn't use FMLE on it, it generates an error !how to put properly the main.asc on FMS 4 (it works good for FMS 3.5)
View 14 Replies
Got a really big problem here. I keep on getting "NetConnection.Connect.Failed" when I load a .asc file on my main.asc file, i use the method load() in my code. I really don't understand why this happens, but when i comment out the code that loads the asc file, I can successfully connect to fms. I can't figure out what's happening here. Btw, i'm using fms4 in windows 7 32bit.
View 6 RepliesI need the main.asc file to return the current directory listing to a flash application.
[Code]...
I am using these settings for media server but there's too much noise when a mic is attached to stream. Code is as following, can you suggest changes to remove the noise for more crystal clear voice?
[Code]...
As stated in the title, can FMS and my Linux server share the same IP or must they be differemt?
View 12 RepliesShould I delete the main.far and apply my main.asc?
View 5 RepliesHow can I use md5 function in main.asc. I am passing md5 token to main.asc, but I can not calculate md5 value in main.asc.
View 3 RepliesI am trying to collect appstats using this code in main.asc. What is wrong here?
[Code]...
How can I detect in my Main.asc if the live stream is in the VP6 format or H.265 format?
View 2 RepliesDoes anyone know if it's possible to execute an external script with the onDisconnect function on FMS?
I'm trying find a better way to log when a user disconnects from a chat application.
I use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesDoes anyone knows if it's possible to write some bytes received from an AIR or Flex client in a server side file using the File class ? I have been trying for hours without any result.My goal is to store on the server side a swf file sended by a client in a ByateArray.Here is the code I have ended with, assuming that myfile.swf alreadey exists on the server prior to the code execution, and is at the right place, and that pBytes is a ByteArray received from the client which contains a swf file :
function writeFile( pBytes )
{
var myFile = new File( "myFile.swf" );
[code]........
I'm doing a test install before we update our old server to 4.03.I've got the server software installed and configured (4.03 server, using iis for web).All the test stuff on the sample index page works, except for the dynamic stream tab.I've eyeballed the .f4m file, and tried putting in a complete url to the samples...but no luck.i just keep getting the stock connection timed out message.
Where do i need to look to start confiriming where this issue may be coming from?I've made made sure I can reach all the test videos by making flash players for them, calling them via rtmp... no problems.It's got to be something dumb with either the f4m file, or the way it's being served (btw, i have added all the mime types to iis , including .f4m as video/mp4....which is one of two ways I've seen it added).
Basically trying to update a "userlist" shared object everytime someone connects.Administration console live log reads:"Sending error message: ...main.asc: line 12: TypeError: this.usersSO has no properties"
I'm connected ok. Here's the server code Doesn't like "usersSO.setProperty()" call:
application.onAppStart = function(){ this.uniqueID=1; this.users = new Object(); this.usersSo = SharedObject.get("userlist", false); }
[code].....
Im picking up a dedicated server it will be CentOS and be well above the minimum req for FMS 3.5 Interactive.
Question: I want to use my dedicated server for more then just the FMS. Is this possible? Basically I want to use the same server for FMS and for the file hosting of my site. Obviously I would give it a different IP but am not sure what I will need to do specifically
I've looked through the scripts in the scripts/ directory, but haven't seen anything obvious.
I would like to be able to specify the file name to capture the stream to. At present, the capture file is always named the same as the stream, which means if I stream for a bit, stop, then restart, the originally captured file gets overwritten. I'd like to be able to incorporate something, i.e. the stream start time, into the capture file name.
I do understand the differance between ssas and as3. Not all, but all most everything I see written in SSAS can be writen into a external AS3 file. This leads me to quite a few questions I'm hoping you kind people can shed some light on for me.
1) What is the advantage of writing a SSAS file over an external AS3 file?
2) Can I write an .asc file in AS3 or do I have to use AS1? Please understand I'm using tuts from fmsguru.com and the books "Learning Flash Media Server" (pdf) and "Programming Flash Communication Server". I'm not a javascript programmer so nothing I do in AS1 seems to make any sence while everything I do in AS3 does. It may not seem like it to you people that are programmers, but to those of us that aren't, AS1 and AS3 are miles apart.
3) kind of off topic, but a security question. I'm not a "hacker" and don't like the jerks that are. My question is on external AS / SSAS files and swf files. When my fla is compiled into a swf does my external AS files remain external? I assume they do, but then what is the threat of the swf being decompiled? In most projects I would do I could care less if somebody had access to my fla as long as they don't have my actionscript files.
I don't know. Maybe on questions one and two I'm getting confused becasue I'm using out dated material. Again I assume that even though fms was built off of the javascript engine it should be able to read and execute my AS3 file. Other wise what was the point of the evolution of actionscript into a fully functional programming language?
I have a flash website. I have a sound on and pause button on the main timeline and when you press the on button I want to play the mp3 from a server so my main file size doesnt get to big. Does anyone know the code for that? I guess I put the mp3 file on the server and then put in a code to the maintime that tells the server when I want to mp3 to begin playing and to pause.
View 1 RepliesI can convert .mov to a Flash file, but I can't even get an .mpg file to open.
Is there anyways I can convert this using Flah CS3 or any freeware that exist out there?
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have a 10 second Intro video that I would like to play before each main video plays. The videos are streaming through FMS 3.5. At the moment I have to attach the intro to the start of the main videos and render out in Premiere Pro CS5 Ideally I would like to set it up so that the intro starts for the 10 seconds and then auto switches to the manin video. To show an example of what I need to do here is a link to an Archery site ( I also do archery as a hobby and noticed this)[URL] If you click on any of the 8 parts for either day 1 or Day two, you will notice a couple the 5 second intro screens and it then automatically goes back to 0 to start the main video.
View 4 RepliesI have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
