Flash Live Media Encoder claims that it can encode video from a firewire connection.Does it also encode audio from the same firewire connection?I've been told that past versions encoded video only
View 4 RepliesI am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI could contact about building a custom live Flash media encoder for our website. We have a database for authentication and a list of upcoming events with stream information (FMS URL and Stream Name) that we want to automate into an encoder. Currently we have our customers use Flash Media Live Encoder and copy/paste the values into the encoder, but would prefer a solution that is more tightly integrated with our site
View 4 RepliesHas there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
I am using Flash media live encoder 3.1 to broadcast to flash media server.
Its is possible place a image logo with the media live encoder??? How i can do this?? I like that my broadcaste have a image logo.
I have installed the Authentication Add-In on a FMS 3.5.5 Development version, running Windows 2008 Server.I can easily get to the users.exe command prompt and add users with no problem.BUT, when I open the Flash Media Live Encoder and go to enter a username/password when connecting to the server, I keep getting "User Not Found".I've went back several times using users.exe and tested for my user credentials and it always states that the user is there.
View 1 RepliesWhen using Adobe Flash Media Live Encoder, it doesn't seem to recognize my system speakers, so I can't record system audio.
View 1 RepliesAre you preserved only in the local though provide the recording function in FME?It will be able to record directly in FMS.
Does the recorded image preserve the image from the camera directly or is what has flowed by way of FMS preserved?
i have got a video application using FLVPLAYBACK component. isLive=true, rtmp://application/live/demo Flash media live encoder 3 the instance is demo. Everything works fine.I need to know when Flash Media Live Encoder 3 is off-line. how i can do that FLVPLAYBACK detect this action and the client is disconnected. i try using buffering but i don't know, how take a time for it. for example is 5sec in buffering do another action or is there some function that detects when there is off-line?
View 2 RepliesThis is sort of a follow up to my previous post, asking about streaming through FMS to Apple and Android.Android and Blackberry devices require that the audio component of video streams be encoded using AAC. Right now I'm telling my customers to buy the MainConcept AAC plugin, or to buy VidBlaster or Wirecast. Can anyone from Adobe comment on when Adobe might release a version of FMLE that includes AAC?
View 6 RepliesI am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 RepliesI need to take the some stream which is coming from firewire on mac, and then transcode/encode it to perticular bitrates, then stream.I think from firewire to FMLE, its straight forward. How can i stream? How can i give my clients ( say from mobile, or from any player as a http url streaming) stream? Do i need to use Flash media server, if yes can anybody point out the steps to set-up the same.
View 12 Replieshow to limited Media Encoder connect the media server?I have a adobe media server3 for liniux and hava a live IP. I can use the Media Encoder connenct the media server anywhere when I use the live IP. I want to know how to limited Media Encoder connect the media server.
View 1 RepliesI'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
I am trying to encode and stream live video. I have downloaded both the Flash Media Encoder and Flash Media Server. To complete the process of streaming video, it appears that I need to obtain a "flash media server URL address" which is called "RTMP" on the encoder page. Where can I find this? Is this something that can be downloaded, or do I have to purchase this from a partner like Level 3 communications, AT&T, etc.?
View 1 RepliesCan Flash Media Encoder handle several video sources and live srteam them all at the same time? We want to stream a few over the air broadcast sources using Flash Media Server v3.0. Is it possible to install several TV tuner cards into a PC and have Media Encoder live steam each of them at the same time? If not, can several copies of the software run on the same machine (each with it's own video source live streaming)?
View 3 RepliesI am currently using Digital Rapids StreamZ to encode video for Flash media Server. The guys who look after the equipment have streamed to flash media server before using RTMP addresses without any problems but ustream doesn't seem to work.
Would there be any reason why the encoded signal would not get through or display on ustream? The StreamZ software is not showing any problems or error messages so we are assuming the encoded feed is being sent correctly but Ustream doesn't detect that there is a flash media stream available for that channel.
Allright, so i'm searching for information on how to write plugins for FMLE 3.0, the reason is that i need to extend some functionality regarding the metadata injections. So, does anyone here know of an API/Framework/SDK like paper that is a good place to start reading? Any input will be welcome, except "nay sayers" because i know it's possible to make plugins, ive seen one or two out there, just dont know where to start.
PS. I have plenty experience in writing DLL's for windows applications, but i would rather refrain from reverse-engineering FMLE to use windows hooks and insert dll's at run/loadtime, would rather have a more or less "intentional" framework to work with.
I would like to build a video conferencing app that supports H.264. Is there a way to use Flash to do that? I understand that Flash natively supports the Sorensen Spark video codec and that you need to use Flash Live Encoder 3 for H.264 encoding. I can't seem to find any documentation that shows me how to use FLE3 with ActionScript.
View 3 RepliesI would like to know if there is a solution available that allows me to plug 2 HDV cameras into a laptop and live switch between the 2 cameras while uploading the live stream via adobe flash media live encoder to the adobe streaming server? the scenario is I want to offer live streaming of corporate seminars that I normally shoot with 2 cameras.
View 1 Repliesis there a possibility of authentication FMLE users to the server on the FMSS? Or such a possibility exists only in the FMIS? Actually, somebody had to deal with this problem? Decide whether it?
View 1 RepliesDoes anyone know if there is a way to use Flash Encoder with. a basic IP Camera instead of a usb webcam. I have searched anch searched and cannot find anything that will tell me.
View 1 RepliesI have a web app that connects two computers and streams video to each other like a video conference. It currently works and also records the video in .f4v format. I am trying to figure out what I need to do to enable the client pc's to stream in H.264. Is it true that I have to use some type of encoder (like Live Encoder) to use H.264? If so, does Live Encoder have to be installed on the client computers? If that is true, is there a way to install the live encoder through our web app, configure it, and close it down when the conference is over, with no interaction from the client? Is there some type of plug-in that we could use that would eliminate the need for installing live encoder on the client computers?
View 2 RepliesWe are testing Flash Media Server 3.5 with Flash Media Live Encoder 3. Right now we have the problem, that we can not connect from FM Live Encoder 3 to FMS 3.5 running on the localhost (M:AdobeFlash Media Server 3.5Apache2.2). Both running as Standard Installation on the same System (OS: Windows XP SP2). The User is not found. So where do we have to setup the user, so that the connection is possible
[Code]...
I am using FMLE 3.1, but I presume that any server side solution would support all encoders. A basic version of the problem would be where I have one server and two encoders (with the same video source over SDI). If one encoder fails I want to be able to deliver the feed from the second encoder, without having client side logic. Is this possible?
I would welcome a discussion on ways to provide improved resiliency in the live streaming environment. It is amazing that no out-of-box solution is available to provide such basic functionality.
Michael
BTW: I asked a similar question some months ago but got no answers. Apologies for bringing it up again, but this must be a fairly common problem, as anybody using FMS and FMLE will need some solution. I have tried the livestreamcast application, but had little success. It also appears to be for a much bigger scale than I have, requiring an all origin environment.
I'm wondering if anybody knows of a guide or a step by step process for configuring a VBrick HS.264 encoder to send video to my FMS for live broadcast. I'm experiencing issues configuring the Transmitters on the VBrick admin panel and unsure how to have FMS recognize the video stream to publish it. Has anybody used a VBrick encoder with FMS?
View 1 RepliesI use third-party encoder to launch RTMP stream to FMS, but there is no way to record thestream, there is no third-party encoder to provide a way to record?
View 2 RepliesWhat I'm looking to do is have a flash player that constantly plays a loop of videos, but it automatically switches to our live stream whenever we start the encoder. Is this possible, and if it is...how can I do this?
View 2 RepliesI'm using the Niagara 4100 streaming appliance to encode a live multiple bitrate streams for an event. The problem is the Niagara encoder doesn't allow me to attach an event name to the stream url like - 'streamevent%i?adbe-live-event=liveevent', instead it only allows 'streamevent%i'. So in the end I get three seperate events with a stream for each event.
Like so:
Example:
/Events/streamevent1/MNMMNNMxxxxx.stream
/Events/streamevent2/MNMMNNMxxxxx.stream
/Events/streamevent3/MNMMNNMxxxxx.stream
AND
/Streams/streamevent1/files
/Streams/streamevent2/files
/Streams/streamevent3/files
Is it possible to make it work this way without using the 'adbe-live-event' parameter using the .f4m manifest file?