I'm sorry, but I wanna change the dimension of the built-in flash player that we get from installing the FMS.. can i do that?I need it to fit my web in the center, and on the left & right side there's bar for ads..anyway, I embed my web with the videoPlayer.swf I got from this folder:"C:Program FilesAdobeFlash Media Server 3.5samplesvideoPlayerswfs"then I checked the source folder and i realized that it's builed with Flex, and I'm not proficient in Flex.After that I tried to decompile the .swf file using sothink swf decompiler and recompile it again, but it gives me error message in Adobe Flash CS3 Professional.
I have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
I understand that the Flash Interactiver Server has this feature called 'Adobe Media Player Tracking Service' which the free version dosen't have. Any idea what ' Adobe Media Player Tracking Service' is and what it does
I need to change the default location of VOD media files from opt/adobe/fms/applications/vod/media.what I did:1. Created a dir test under default "media" dir2. Placed my f4v files inside "test" dir3. Modified applications.xml as follows:
I'm using the RTMFP protocol to publish and play video and audio, but i'm with a little problem. I installed the FMS 4 Development Server in a Windows Server machine located in our local network and it works perfectly. In order to deploy our application, we have a remote server with a fresh install of the Ubuntu 10.04 Server, and the FMS 4 installed in this server. In other server we have the Java and Flex application, which will be used in the client browser.
The problem is that when trying to change the NetConnection url to the remote FMS server, which is the Ubuntu server, the netconnection can't connect to it. When changing to the RTMP protocol it connects, but with the RTMFP don't. I can't find any information in the log files or anything else.
I try to switch or change a server-side stream, it starts lagging after 2 seconds of playing and sound disappears. Here are scenarios that result in that terrible lag:
1. I create server-side playlist with stream.play() with reset=false; when it is time to play the next movie in the playlist, it starts lagging after 2 seconds.
2. The same problems appears when I just switch streams. I installed FMF Feature Explorer and tried to launch SwitchStreams sample application: the same problem - server stream starts lagging after I switch streams with stream.play().
I tried on different servers (local and remote), with different players (debug player of FMS Admin Console, Standard Flash videoplayer component, OSMF player, Flex video player). I also tried all possible flv, f4v and mp4 file compression options for video files - still the same problem. I have also tried literally thousands of Application.xml settings: changing buffer, buffer ration etc. Is there any tip where I should search for a solution?
I have a swc plugin embedded in my product to stream live video to a group of recipients.The plugin uses the NetStream, NetGroup and NetConnection objects, the server I use to handle the RTMFP session is Influxis.One client creates a group as a publisher, and stream a live video.His Camera is enabled and I can see the video on the screen as well. The others connect to his group and play the video.Peer assisted Networking is enabled for both the publisher and the recipients.The plugin worked well in all 10.x versions (10.1/10.2/10.3)However, when upgrading to flash player 11.x, it stopped working.
-11.x to 11.x isn't working. -10.x with 11.x isn't working. -only 10.x to 10.x is working.
The server I use to handle the RTMFP protocol is Influxis.com I sent them the same question as well.The weirdest fact is that I'm using flash builder 4.6 with 4.6 sdk, which is aimed for flash player 11.1, and it is only working with 10.x flash players.
We are streaming live events encoding using H.264, so therefore we have to save the file as a .f4v. However, whenever I try to play the file, I keep getting a "playback failed" in Adobe Media Player. What could I be missing? Is there anything else I need to do in Flash Media Live Encoder?
I would like to show the live TV video on Flash player from my TV tunner. Is it possible to do it without FMS like using Webcam?
It will not be running on the internet/network and only for a computer that have TV tunner. (Ideally: open a swf and you can watch a TV tunner by flash player). But i cannot find any information if i can do it without FMS.
I've setup a simple DVR player using the DVRCast application and Adobe FLVPlayback 2.5 from Adobe tools. I'm able to use it to play a recorded live stream which is recorded by Flash Media Live Encoder.
I'm wandering if I can now use the DVR player to play a video within the vod application?
To start with I just want to copy the f4v file created by Live Encoder to the vod directory and then use the DVR player to play it.
I have been experiencing a somewhat random inability of my player to load on a Macintosh. It doesn't happen everytime, maybe 2 out of 10 times. This does not happen on a Pc. My flash file is actionscript 2.0, and I have enabled hardware acceleration. This issue was happening before I enabled the hardware acceleration. Here is the player I am talking about:[URL]
We currenlty don't have the password for the administration console, so I haven't been able to monitor it that way.
I have installed FMS 4.5 successfully. I am able to run all the videos in the index.html page (filmthos.com/flash), including the HLS video on my Iphone. I was able to setup a video player for rtmp and it works fine, but I am having trouble with setting up video players for HLS and HDS. I am looking for somthing simple.
The source file or located in these location: /hds-vod/mvp5/media/MP.mp4.f4m and /hls-vod/mvp5/media/MP.mp4.m3u8 respectively (the httpd.conf location for both is HttpStreamingContentPath "/opt/adobe/fms/applications"). So obviously I want a simple video player for the HDS that plays flash and another to play HLS and HTML5. The index.html seems to cumbersome to fine out how these players work.
we are using flash interactive server 3.5 and have just noticed that when flash player upgrades to 10r32 the streaming fails? Is this a known issue and does anyone know if it is specifically a rtmp prob?
I'm trying to make a new flash player to stream a video from the vod folder. But after creating the player, the video doesn't show. It only shows the a blank screen with the player skin.
what's the format to put in the RTMPE url into the source/content path?
I am trying to embed a flash player as a pop-up from a web page.So far, we manage only to pop a new browser page which plays the "Flash" video, without a controlable player. what do i need to do to embed a player into the page, like here: [URL]or as a player as a pop-up above the page? do i need a flash media server for that or can it work with progressive download and no dedicated installations?
I have written a program to publish the audio and video data to the FMS. I am publishing the video data to FMS in live mode and trying to play back via OSMF player. When i start publishing video data in the livepkgr application folder of FMS files like .bootstrap, .control, .meta are getting created. But when i try to playback via OSMFplayer i will get error 1009 and one intersting thing what i have observed is after 7 minutes this error won't come and OSMF player starts playing properly. give the solution for error 1009 which comes only for first 7 minutes?
I've placed some of my videos flv and f4v in the vod/media and webroot/vod folders with sample files provided. My files were checked with flvcheck and passed. When I load the embed code into a Dreamweaver HTML file and save the page to the webroot folder as instructed, the provided sample files play in my Firefox browser. However, when I edit the code to insert my files in strict accordance with the instructions concerning codecID and extension, I get the following message on the Browser "We are unable to connect to the content you've requested." My videos are less than 30 minutes in length and were encoded H.264 using Adobe Media Encoder and as I said passed the flvcheck.
Is the source for the demo player bundled with the FMS 4.5 install, available somewhere? It looks like a useful tool to debug playback of streams and I was trying to to see if I could port it to Air for IOS and Android for the purposes of evaluting the playback quality of various sample video files.
i would like to ask which is the best way to embed my .swf player to my blog and my site to view my streaming video from my FMS?The whole streaming proccess works great but i do not know how to put the .swf player to my blog and my site
I have a Flash Media Streaming Server 4.0 running for more than a year now. I protect the access to my server through the "allowedHTMLdomains.txt and allowedSWFdomains.txt feature" (amongst other things...). We noticed that with Firefox 10.0.2 (last version) and Flash Player 11.1.102.62 (last version) our customers can't connect anymore. In the admin console we can read things like: Authentication failed for pageurl: [URL]
I have just installed Flash Media Server developer version 4.5 on my server, the Start Screen appears and keeps asking me to install Flash Player version 10.2 or above. I have repeatedly installed Flash Player 11 to no avail. I have tried to start the Admin Console but it just shows the 'get flash player' icon. I can confirm that Apache is running as I get an error from it when I try to access the Admin Console from the Internet. The Adobe web-site confirms that Flash Player 11 is installed and working correctly for the Operating System, Windows 2k8-R2. I have restarted the server to make sure everything has installed correctly, but it makes no difference.
I have a small media server. It's actually a Netgear GoFlex Home (NAS) running Plugbox Linux. It's currently running a bunch of servers HTTP/FTP/WebDAV/DLNA/Webmin etc and I want to create a frontend for my multimedia that I can access from the internet. (I preimarily use it as a DLNA media server).At first I considered using a Java Servlets backend with a Flex based frontend but that fact that I can't use Flex Builder from work (licensing) and I'm unwilling to pay a few hundred pounds for it, that's out of the question.
Just installed Windows 7 RC (7100), and got the latest Flash player for IE8 and Opera. My site [URL] has a music player I created that plays (streams) MP3s from a Flash Comm Server I run. The player works fine with Flash Player version 10.0.22.87 on other platforms, but not in Windows 7. Once you pick a song, it should start immediately. Even clicking the play button doesn't work. The symptoms make me think there's a problem establishing the netconnection for streaming. I've read Microsoft added streaming of some kind in Windows Media Player for Windows 7, could it be interfering?
I wanted to use the included video player from Flash media server but can't find a list of variables and values to pass to the player. Is there a list and could anyone point me in the right direction? I'm specifically looking to pass a stream name for a live stream to the video player.
[code]This is my code that i have inserted into the first frame(?) of the fla file.When I use the swf in a html web page, i can hear the video but I can't see it and play skin cannot control the video.This is also a part of a security token code which i'm implementing on the client-side.
