I wanted to use the included video player from Flash media server but can't find a list of variables and values to pass to the player. Is there a list and could anyone point me in the right direction? I'm specifically looking to pass a stream name for a live stream to the video player.
View 6 RepliesI'm developing a video player for Pure IP multicast video. I'm using the Multicast Configurator provided with FMS 4 for generating the configuration. This is the manifest file generated:
<manifest xmlns="[URL]">
<id>Multicast_IP_Multicast</id>
<streamType>live</streamType>
<duration>0</duration>
[Code] .....
That's not working. And I have several doubts about it:
1.- It's not working, and I don't know where is the error. I'm not sure what I should add as parameter in GroupSpecifier constructor? GroupSpecs from manifest file?? "com.adobe.pureIPMulticastGroup"??
2.- I've been watching the multicast.as application in FMS4. The only way of publishing multicast streams in FMS4 is using the configurarion from Multicast Config Tool? Is it possible publishing a stream without the GroupsSpec generated by the Config Tool?
3.- If It's mandatory using the config tools for managinf the pure ip multicast. I would like to integrate the Multicast Config Tool in my platform. Is there any place where I could get the code of Multicast Config Tool? Any documentation about how to build it? This component have any flashvars or callbacks that could allow me integrate it in my platform?
I have installed FMS 3.5 on a Linux root server with openSUSE 10.3 without included Apache 2.2. That is why the webserver is already installed and running. Now I should know next steps to configure both FMS and Apache to make it work for streaming recorded .flv files via HTTP and the VOD application. Starting Apache manually after FMS server is running always ends up in failure and error message: 'Address already in use. Could not bind to address [::]:80. If I start Apache first and then FMS server everything is running. But I guess this is not correct because the manual mentioned first starting FMS server.
View 21 RepliesI have installed FMS 4.5 successfully. I am able to run all the videos in the index.html page (filmthos.com/flash), including the HLS video on my Iphone. I was able to setup a video player for rtmp and it works fine, but I am having trouble with setting up video players for HLS and HDS. I am looking for somthing simple.
The source file or located in these location: /hds-vod/mvp5/media/MP.mp4.f4m and /hls-vod/mvp5/media/MP.mp4.m3u8 respectively (the httpd.conf location for both is HttpStreamingContentPath "/opt/adobe/fms/applications"). So obviously I want a simple video player for the HDS that plays flash and another to play HLS and HTML5. The index.html seems to cumbersome to fine out how these players work.
I've placed some of my videos flv and f4v in the vod/media and webroot/vod folders with sample files provided. My files were checked with flvcheck and passed. When I load the embed code into a Dreamweaver HTML file and save the page to the webroot folder as instructed, the provided sample files play in my Firefox browser. However, when I edit the code to insert my files in strict accordance with the instructions concerning codecID and extension, I get the following message on the Browser "We are unable to connect to the content you've requested." My videos are less than 30 minutes in length and were encoded H.264 using Adobe Media Encoder and as I said passed the flvcheck.
View 1 Replies[code]This is my code that i have inserted into the first frame(?) of the fla file.When I use the swf in a html web page, i can hear the video but I can't see it and play skin cannot control the video.This is also a part of a security token code which i'm implementing on the client-side.
View 14 RepliesI've just been asked to create a video player which automatically chooses the correct bitrate video to stream by detecting the bandwidth.I have no experience creating a video player so I'm looking for links/resources to do some research on the topic.Has anyone here created a video player in Flash? Would it be better to create in Flash or Flex?Once again, I have no prior knowledge in this type of creation and could use an experienced developer's opinion on what the first step is towards progress.
View 3 RepliesI'm playing live stream supporting FMLE from FMS. There is no problem with playing if we are starting at first the player and then we are starting the stream with FMLE. The video skipping problem is occurs only if we are starting first the stream with FMLE and than our player.The versions: FMLE 3.0.1.5963, FMIS 4.0.0, Flash Player 10.1.53.64, and codec h.264 Is this a bug in FMS/FMLE or I'm doing something wrong?
View 3 Repliesi want do live dynamic streaming for FMS. i have refer [URL]. But the sample player show blank.
i using Adobe Flash Media Live Encoder 3.2, Adobe Flash Media interactive Server 3.5.3 and sample file "live_dynstream_dvr.zip".
1. I setting up my FMLE and set FMS url and stream name
2. I monitor connection in fms_console.htm
3. I run DVRController
4. i configure and play the video with livedvr
but my video player is show blank
5. in my fms_console.htm show 3 connection
is it possible to play video stream from non-adobe(or homebrew server), in the newest flash player(10).It looks like the VideoPlayer only plays the stream from FMS? Is it the business model of Adobe?
View 2 RepliesI'm currently creating a whiteboard in Flash, and I want to be able to record all of the user interaction for later playback. Is it somehow possible to create a video of what the user is drawing?
View 1 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI had a question about RED5 & Adobe... Does anyone know if it is possible to broadcast multiple video chats using Adobe flash player from "RED5 flash server"?
View 2 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replieswhen i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 Replieswhat will be the best way for video conference without any delay for multiple users(200-300). How it can be possible with FMS and Flex?
View 3 RepliesCreate a html video list that uses a flash video player?
View 14 RepliesAs titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesI am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 RepliesI want to have a website where users can record short video clips (using a webcam) and then have those videos saved on the FMS for viewing later. I've seen a lot about streaming video, but I actually want to save the video.
View 1 RepliesI understand that the Flash Interactiver Server has this feature called 'Adobe Media Player Tracking Service' which the free version dosen't have. Any idea what ' Adobe Media Player Tracking Service' is and what it does
View 2 Repliesfiguring out a method to reset variables on a list component change for my mp3 player. everytime i select a new song on the list or select the same song the timer for song position keeps going and nothing resets. here is the action script:
ActionScript Code:
var artistList:mx.controls.List;
var sound:Sound = new Sound();
info_txt.autoSize = true;
[Code].....
Is there any way to access a Flash Media Server server-side script through a C++ plugin? I know you can call server-side functions, but I want to use the plugin to do image processing, so I need to get bitmap data from the client to the plugin. I've been poring over the documentation and the forums and there doesn't seem to be any way for the plugin to communcate with the server other than to read Event properties. If this is the only way for the plugin to recieve data from the server, is there any way to override an event property to send custom data?
View 5 RepliesI am publishing and AIR 1.5 application from Flash CS4 on Mac OS X. I add a list of files to include in the Installer Settings>Included Files box. Sometimes when I publish or click "OK", the included files listing is not saved except for app swf and xml listings. This means I have to select all the files again. This does work sometimes, the files list is saved, but other times, not. It doesn't require opening and closing the Flash app, just opening and closing the dialog for it to fail to retain the list.
View 2 Repliesi'm trying to add the (list) component to a video player...i have all of my info being read from a basic xml page.i want it to play three videos
<vid desc="video2 dark knight"
src="video/DK480p.mov" />
i can get the list to display the desc but i can not get it to play any video when i click the list.
I have an *.flv file on a FMS. When I play it on the client side the video plays just fine, but when I call Stream.play(filename, 0, -1, false) on the server side the video turns out really choppy.I both cases I use NetConnection to connect to an rtmp and NetStream to play the stream, but in one case I connect to a stream and request the server to play my file on that stream. Apparently that doesn't work with files? It works just fine for live streams.
View 20 RepliesHow can i connect to my own server to watch my streaming video from another computer?
View 10 Replies