Media Server :: Stream.play On Server Side Makes Video Choppy?
Apr 30, 2010
I have an *.flv file on a FMS. When I play it on the client side the video plays just fine, but when I call Stream.play(filename, 0, -1, false) on the server side the video turns out really choppy.I both cases I use NetConnection to connect to an rtmp and NetStream to play the stream, but in one case I connect to a stream and request the server to play my file on that stream. Apparently that doesn't work with files? It works just fine for live streams.
View 20 Replies
Similar Posts:
Apr 30, 2010
I have an *.flv file on a FMS. When I play it on the client side the video plays just fine, but when I call Stream.play(filename, 0, -1, false) on the server side the video turns out really choppy. I both cases I use NetConnection to connect to an rtmp and NetStream to play the stream, but in one case I connect to a stream and request the server to play my file on that stream.
View 2 Replies
Dec 10, 2010
Server conf:
2 x Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
16Gb RAM
2 Gbit ethernet channel
OS - Linux CentOS 5.5 x86_64
FMS4 Interactive
Live stream parameters:
320Ń…240 qua_=87 bw_=200000 kf_=5 fps_=18
So, after approximately 600 connections to one stream video becomes choppy (periodically freeze, slow motions). CPU-usage at this time is 100-120% (maximum is 800%, 100% per each core), network usage is 500 Mbit/sec.But second live stream(with few connections) at this server looks fine simultaneously with 600 connections at first stream.Experiments with recommendation in "Configuring performance features" documentation chapter(enabling/disabling aggregate messages and configure the size of stream chunks) do not help.
View 2 Replies
Dec 20, 2010
I need a way to set the permissions (ex 0777) for the recorded streams without calling any additionals scripts.
View 2 Replies
Sep 6, 2010
I understand how clients use bandwidth detection etc to dynamically switch streams via client calls with ns.play2( ... ), but I was wondering if it's possible to only ever use 1 initial ns.play( ... ) call on the client side, but let FMS server side logic that I write dictate which client sees what content. For example, I have 3 clients connected to my FMS server, all watching a live stream. I then decide I want clientA to see 'recordedMovieA.flv', clientB to continue seeing the live stream, and clientC to watch 'recordedMovieB.flv'.
[Code]...
View 5 Replies
Nov 12, 2010
I am recording a video and while recording I issue some NetStream.send("doSomething", params) commands from client side. When I am playing back this video I receive the doSomething events on client side. No problems so far.Can I receive those events on server side? I want to handle those events on server side. Not client side.
View 2 Replies
Nov 6, 2009
Why can't (or better yet) you kill client stream from server side - I seen some code that FME may call on server side like s= stream.get(streamOBJ.name); s.play(false); delete s; application.gc(); // over kill but still did not work
View 2 Replies
Feb 1, 2012
While streaming the audio through FMS 3.5, audio starts breaking at the receiver's end after some time. can anyone please provide a suitable solution?
View 4 Replies
Jan 28, 2010
I try to switch or change a server-side stream, it starts lagging after 2 seconds of playing and sound disappears. Here are scenarios that result in that terrible lag:
1. I create server-side playlist with stream.play() with reset=false; when it is time to play the next movie in the playlist, it starts lagging after 2 seconds.
2. The same problems appears when I just switch streams. I installed FMF Feature Explorer and tried to launch SwitchStreams sample application: the same problem - server stream starts lagging after I switch streams with stream.play().
I tried on different servers (local and remote), with different players (debug player of FMS Admin Console, Standard Flash videoplayer component, OSMF player, Flex video player). I also tried all possible flv, f4v and mp4 file compression options for video files - still the same problem. I have also tried literally thousands of Application.xml settings: changing buffer, buffer ration etc. Is there any tip where I should search for a solution?
View 4 Replies
Jul 23, 2010
I have a problem with server side caching on FMS (3.5.3).I've taken the live main.asc and modified it in order to record streams on the server with timestamp names.as follows:
/*
* application.onAppStart:
* is called when application load. It contains Live (out of the box)
* application specific initializations.
[code]....
I use FMLE (3.1) to stream to the server and all works fine when i have only 1 stream going at one only time.Now when i have several clients streaming to my server, the new client will stop the old client recording after a minute or so. tracing doesnt even flag the fact that the stream is stopping recording.
View 2 Replies
Jun 21, 2011
I use Flash Media Server 4 and Flash Media Live Encoder 3.2 for a strem rtmp.
I set FMS url to rtmp:localhost/livepkgr and I set stream name to :livestream.m3u8
I started FMS and I'd want to play my stream in a HTML5 video tag.
I have not changed FMS4 parameter, and I'd want to insert the src attribute in video tag.
View 8 Replies
Sep 23, 2010
I'm trying to get Flex Builder 3 to play a live video stream with Flash Media Server and Flash Live Media Encoder.
I'm able to stream pre-recrorded (vod) flvs in flex from flash media server.
I'm able to stream live video using Flash/FMS/Flas Live Media Encoder, but not with Flex.
This code streams pre-recorded Video on Demand flvs, but not live streams:
If I change source to "rtmp://localhost/live/livesream.flv, I get nothing.
<?xml version="1.0"?><!-- controlsvideodisplayVideoDisplayFMS.mxml --><mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:HBox> <mx:Label text="RTMP FMS 2.0"/> <mx:VideoDisplay autoBandWidthDetection="false" source="rtmp://localhost/vod/Legend.flv"/> </mx:HBox></mx:Application>
View 3 Replies
Oct 10, 2010
is it possible to play video stream from non-adobe(or homebrew server), in the newest flash player(10).It looks like the VideoPlayer only plays the stream from FMS? Is it the business model of Adobe?
View 2 Replies
Sep 23, 2010
I am streaming pre recorded audio files (mp4) to an AIR client. I have tried two different solutions,
streaming the file directly with the NetStream.play("mp4:xxxxx.m4a") and creating a server side playlist, adding the same sound clip and then streaming the playlist. The problem is, when streaming the playlist i get a few NetStream.Play.InsufficientBW, this does not happen when streaming the file direct. Both solutions uses bufferTime=1.0
I would like to use a server side playlist to implement a simple key solution so that the client dont know the full path to the file, but instead sends a key to a custom server side function that looks up the file path and creates a stream for the client.
View 1 Replies
Dec 8, 2009
to generate thumbnails of the streaming video to control de contents of the video streaming. Could I do that in the server side?There is any setting to do that? Could I use the getOnMetadata method to catch a bitarray and then put in into a bitmap file?
View 1 Replies
Jul 19, 2011
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Replies
Jan 26, 2007
I was wondering. is it possible to manipulate in any way the video streams on the server side? Like for example,to have two streams coming from two clients and mix them into one stream,so a third client (or more) can play just one stream per client instead of two?
View 5 Replies
Aug 4, 2009
if I repeat this IIS topic, I couldn't find the answer to my problem any where on the internet. I installed FMS Dev 3.5 on Win 2003 Server with IIS 6.0 enabled. I don't have any issue with port 80 Listening, I used the IP address 192.168.0.21 for my web application (IIS) and 192.168.0.22 for FMS (I only have one network card and port 1935 is open under firewall). I can play the sample videos (RTMP, HTTP, and Dynamic Stream) using the Flash Media Start Screen (or from the location C: Program FilesAdobe Flash Media Server 3.5webrootindex.html) without any problem.
I then modified the IIS Default Website to look at the "webroot" folder (C: Program FilesAdobe Flash Media Server 3.5webroot). From IE, I can access the default web site by enter http://192.168.0.21/index.html. The website loads up correctly, and the RTMP video is playing perfectly. However, if I click Play Video (HTTP) or Dynamic Stream (tab), I receive "Connection Error. Please press Play to try again." I look at the log file (access.01.log) and see the error log "Session disconnect
[Code]...
View 5 Replies
Apr 27, 2009
I use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 Replies
Apr 7, 2010
i am currently playing around with a flash media server trial in combination with the flowplayer.All in all i am testing the performance and general functionality for the company i work for.Anyways, i am trying to search a way to check the bandwidth of a client ( server sided ) and redirecting him to the right video stream.Sure this could be done by the backend flash application, but its out intention to perform this check server sided.
View 4 Replies
May 27, 2010
we just set up FMS and basically what's happening is im using the standard run-of-the mill FLVplayback component and I try to run a video (an MP4) file which is streamed through FMS. The video plays, but intermittently chops.
Next test:
Akamai SMIL file with sthe same player plays totally smoothe, no problems.
Next test:
Put new video on FMS server (video chops intermittently) - we then go right next to the server, with literally a 300K second download speed. Still chops.
Next test:
Try different media, same thing.
So essentially the FMS server CANNOT stream any videos properly. Its not a bandwidth issue, and it makes no sense.
I try different video players, tried changing the bufferTime properties, same thing. The FMS server is running at 0% cpu and is a fast machien.
FMS settings I can do to get optimal performance?
View 13 Replies
Aug 6, 2009
We have installed FMS on our godaddy server to work with and used live video streaming services. We are having problems with the video quality being choppy, slow and pauses continuously during live broadcast and motion. We can't figure what is wrong; video needs to be flawless and in high quality. The godaddy server is running:
Red Hat Fedora Core 7
Intel Core 2 Duo - 2.13 GHzRAM
2 GB RAM
250 GB Total Disk Space
I am facing below mentioned problem regarding video broadcasting with adobe flash media interactive server (Developers version). I am using DVRCAST for recording video from a webcam and broadcasting the same live. Please find video settings below.
width:320
height:240
fps:15
quality:90
bandwidth:150
buffer time:0.01
Our problem is that videos are not playing smoothly in application. The motion is getting paused and interrupted in time of broadcast live. I downloaded and checked the recorded flv files from server and found the recorded file also has same problem. So this problem is appearing in time of streaming the video from client computer to fms server. This problem is not appearing when I am testing the application in my localhost.
My code for live streaming mentioned below:
private function publishCamera():void {
cam = Camera.getCamera();
cam.setMode(cameraSettings.width,cameraSettings.height,cameraSettings .fps);
cam.setQuality(cameraSettings.bandwidth,0);
cam.setQuality(cameraSettings.bandwidth,cameraSettings.quality);
[Code] .....
View 5 Replies
Nov 28, 2010
It's natural for users to find something interesting and record it when subscribing to a live video,
but so far I can only record it when publishing,
View 14 Replies
May 24, 2010
I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 Replies
Nov 10, 2010
Below is the code. When the swf is connected to FMS(the connection is successful) I use this application.user_so.send("enterContestGroup"); to call the client side mothed. You can see that in the client side I have defined the "enterContestGroup" mothed. However the fact is it doesn't call that mothed. Can anybody tell me what the error is
application.onAppStart = function(){ application.user_so = SharedObject.get("user_so", false); application.nextId = 0;}application.onConnect = function(newClient) application.acceptConnection(newClient);
[code]....
View 8 Replies
Jan 24, 2007
i'm wanting to stream video or even just load it into my flash sites and not lag them....anyway i have had a few people tell me to look at flash media server and flash comm server. i have but i am really confused with it all...WHERE DO I START?? WHAT TO KNOW?? HOW TO DO IT??? etc
View 2 Replies
Dec 20, 2011
I am trying to find a swf to video rendering engine - basically a server side engine that can make a video as it's being assembled (or if there is an api offered by ustream). We made a Facebook application that basically takes your photos and makes a slideshow of them, but then we would like people to be able to save the slideshow as a movie and then upload it to youtube or email it to a friend. We found [[URL] but are trying to find an alternative..something cheaper perhaps.
I even was looking at the technology behind Elf Yourself [URL] but the ones I found basically just mentioned the motion tracking technology and not how they converted/exported it at the end.
View 1 Replies
Nov 17, 2009
Using SSAS on FMS3.5, is there a way to get the stream name of a play event? In my case, I am trying to run additional steps when a stream is played and I need the stream name to do so.
View 3 Replies
Jan 26, 2011
The $995.00 version is listed as not supporting server side playlists. Is it possible to implement internet TV station like functionality using that version? I would like to have a list of files to play out and have it so those connected are all viewing the same thing.
View 1 Replies
Apr 28, 2010
One server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 Replies
