Media Server :: Multi Point Publishing Live/VOD?
Oct 10, 2011
1) I currently have multi point publishing set up to rebroadcast a stream between several servers. I'm running into an issue where even if it's a live stream, when a client connects, it starts from the beginning and you have to seek to the very end for it to go live.I've attached my main.asc file
application.onAppStart = function()
{
trace("Application name: " + application.name);[code]........
2) Is there any way to set up multi point publishing on Video on Demand files?
3) Say server 2 has restarted, is there anyway to force a push to that server without having to restart the feed?
View 29 Replies
Similar Posts:
Oct 2, 2009
I have justed started using Flash Media server so this could be a really easy one to answer or not even possible.I have Adobe Flash Media Live Encoder 3 publishing to Adobe Flash Media Server 3.5 which then publishes this live stream to two CDN providers. I want to publish the stream with a different name to each CDN. Anyone know howI can do this without having FMLE3 publishing a backup stream and then FMS having to process two differently named streams?I.E.FMLE publishes a stream called bobThis is then published to CDN1 as bob and I then want to publish it to CDN2 as bob2Below the main.asc for the application but it ignores the second stream name and publishes to CDN2 with bob
main.asc file
server-side actionscript[code].....
View 1 Replies
Oct 23, 2011
I use different versions of FMS (3.0 3.5 4.0 to 4.5) to muti-point publishing?Use existing old ones for most streams, and use 4.5 for iOS apps.
The answer is Im guessing probably yes, as I was able to multi-point publish to different big company's new FMS (4?) from one of our FMS 3.0 machine. But just to make sure before I make investment? Also Air 3 sdk based iOS app now can connect to FMS 4.5 and play h264 live video stream on ios devices over the appstore approved http-live-streaming protocol right? Just to be clear
View 2 Replies
Aug 15, 2010
I have made a sample application for publishing video through FMS using as3.In that I had used the same code as given in the sample provided by the adobe,
m_nc = new NetConnection("rtmpt://localhost:1935/Test");
private function onNetStatus(event:NetStatusEvent):void {
switch (event.info.code) case "NetConnection.Connect.
[code].....
View 2 Replies
Sep 15, 2010
I'm having a reliability problem with publishing live, h.264 streams from FFMPEG (using the rtmp publish ability now built into FFMPEG, where I can set an rtmp address as the output).After a random period of time (usually between an hour and several hours), the default "live" application in FMS 4 (or 3.5) eventually drops the connection from the FFMPEG encoder. This is what appears in the log for the application:"Dropping application (live/_definst_) message. Clients not allowed to broadcast message."After googling the error, I discovered that people have been reporting this error for several years, but there has not been a single response from any FMS experts or Adobe about what causes the error.
View 6 Replies
Sep 1, 2010
I am facing a strange issue with a pair of FMIS servers set up with Multipoint Publishing. Configuration is as follows:
Encoder >>>> FMIS1 >>>> FMIS2
When freshly started, I am able to view live streams from both servers, however, periodically, FMIS2 unpublishes the streams as seen in the log below. When this happens lives streams are accessible from FMIS1 but not FMIS2. In order to resume live streams on FMIS2, FMIS1 must be restarted.
Logs:
2010-09-01 14:31:00 9244 (s)2641173 NGA_1 is unpublishing -
2010-09-01 14:31:00 9244 (s)2641173 FTV_1 is unpublishing -
2010-09-01 14:31:00 9244 (s)2641173 BBCWN_1 is unpublishing -
2010-09-01 14:31:00 9244 (s)2641173 CTI_1 is unpublishing -
2010-09-01 14:31:00 9244 (s)2641173 CNN_1 is unpublishing -
.....
View 7 Replies
Oct 4, 2010
I've managed to publish video now: ns.attachAudio (mic);ns.attachCamera (cam);ns.publish ("name","record"); But without time information.
View 22 Replies
Apr 28, 2011
i have a website like ustream, where user can register and create live channels and publish live video using FMLE.
Now i want to check wether a particular channel is online or offline. I have stream name for particular channel. My website is coded in PHP. I have tried using getLiveStreamStats function, it works fine where the XML file is not heavy. I mean number of subscribers are less. Then i can just check the Publisher Tag. if it exists that means stream video is live, else not.
But problem arrives when the number of subscribers are high. The XML file do not loads in PHP, and it takes too much time to load the page.
what can be done to just check if the xml file has publisher tag. and display if the stream is live or not
View 12 Replies
Jan 3, 2012
I want to retrieve the list of live stream name.
View 1 Replies
Dec 12, 2011
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
View 2 Replies
Jan 3, 2010
I would like to know if there is a solution available that allows me to plug 2 HDV cameras into a laptop and live switch between the 2 cameras while uploading the live stream via adobe flash media live encoder to the adobe streaming server? the scenario is I want to offer live streaming of corporate seminars that I normally shoot with 2 cameras.
View 1 Replies
Aug 23, 2010
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Aug 31, 2010
I am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
View 1 Replies
Jul 19, 2011
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Replies
Oct 26, 2011
I have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 Replies
Jun 11, 2010
I m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 Replies
Nov 14, 2011
I'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
View 6 Replies
Feb 15, 2011
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 Replies
Apr 28, 2010
One server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 Replies
Jul 20, 2009
what does Multipoint Publishing mean?
View 11 Replies
Oct 28, 2009
I use the Windows MEdia Server, but iŽd like to migration to FMS. I set a login and passwrod on WMS to Encoder to use. Using FMS, how can i do to set a login and/or password for use by Flash Media Encoder?
View 9 Replies
Dec 21, 2009
I have a FMS 3 in on a linux server and I have a ViewCast Niagara Pro II encoder. I can publish to the FMS 3 no problem but how to I limit who can publish to the server, because currently I can use the free Adobe Media Encoder to connect to the server and publish with no authorization which tells me anybody could do the same if they just input the rtmp url and feed name.
View 29 Replies
Apr 12, 2010
I could contact about building a custom live Flash media encoder for our website. We have a database for authentication and a list of upcoming events with stream information (FMS URL and Stream Name) that we want to automate into an encoder. Currently we have our customers use Flash Media Live Encoder and copy/paste the values into the encoder, but would prefer a solution that is more tightly integrated with our site
View 4 Replies
Aug 19, 2011
Has there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
View 7 Replies
Mar 30, 2012
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
View 1 Replies
Jun 26, 2010
I am using Flash media live encoder 3.1 to broadcast to flash media server.
Its is possible place a image logo with the media live encoder??? How i can do this?? I like that my broadcaste have a image logo.
View 1 Replies
Mar 30, 2011
I have installed the Authentication Add-In on a FMS 3.5.5 Development version, running Windows 2008 Server.I can easily get to the users.exe command prompt and add users with no problem.BUT, when I open the Flash Media Live Encoder and go to enter a username/password when connecting to the server, I keep getting "User Not Found".I've went back several times using users.exe and tested for my user credentials and it always states that the user is there.
View 1 Replies
Jan 6, 2012
When using Adobe Flash Media Live Encoder, it doesn't seem to recognize my system speakers, so I can't record system audio.
View 1 Replies
Nov 14, 2011
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 Replies
