Media Server :: Stream Works Fine On Local Subnet But Not Over Web?
Dec 30, 2009
I followed Tom Green's tutorials and at this point I can publish a live stream which I can view and interact with just fine on my local LAN.The FMS is NAT'ed to the outside world and I have ports 80 & 1935 open to the server.When I use a browser from the outside world and put in the servers public address I can see & interact with the FMS start page just fine. I can use the "interactive" tab and supply my live stream name and view the stream just fineHowever when I try to launch the Flashplayer that I built all I see is the controls with moving stipes, No video feed above. I can browse to the flashplayer HTML file on my local LAN and it works fine. Interestingly enough I cannot open the flashplayer HTML file directly on the server either (but I can open the start page application and interact with it).
View 1 Replies
Similar Posts:
Jul 16, 2009
I have my stuff set up and everything works fine except for a very strange glitch.When I use the internal IP address (192.168.###.###) from a machine on the internal network, it works fine.When I use the external IP address (209.###.###.### which eventually maps to that internal IP address) from a machine out in the world, like at home or a hotel or a clients site, it works fine.But, when I use the external IP address from a machine on the internal network, everything works except the flv file doesn't stream. The HTML page displays, the swf player displays, but the flv file doesn't stream; the swf player displays the message "Connection Error. Please press Play to try again."
What could possibly make this happen? To me, it seems impossible. Could there be a setting in FMS that would cause this sort of thing? I very much doubt it is a firewall issue, because if it were, then the file wouldn't stream from outside the firewall.
View 5 Replies
Nov 22, 2010
I created a textfield on stage, set it as dynamic, put a UIScrollBar next to it , with component inspector I set scrollTargetName to the instance name of the textfield then I wrote these actions:
var externalReq:URLRequest = new URLRequest("loremIpsum.txt");var externalLoad:URLLoader = new URLLoader();externalLoad.load(externalReq);externalLoad.addEventListener(Event.COMPLETE, textReady);function textReady(event:Event):void { theText.text = event.target.data;}
Ot works on pc just fine. When I upload the swf and the text file to my godaddy linux hosting account the scroller doesn't work.example on server: [URL]the text you see displayed is only about a quarter of the file, I should be able to scroll through it.
View 1 Replies
Feb 5, 2010
There was always a flash movie on the homepage and it worked fine. A couple days ago I replaced the movie with a new one and added a .swf to the portfolio page as well. On the portfolio page, the movie is layered behind a series of transparent .pngs that link to their corresponding lightbox designations. The movie just plays, there isn't any interaction this way, atleast not in flash.
The problem: Everything works perfectly fine locally on all browsers and not at all on the server across all browsers. I have seen this problem before and read alot of posts about it.I know I have the proper scripts files. I've re-saved flash movies, changed their location within the site, published them with the appropriate settings, nothing seems to do the trick. Whats worse is that the lightbox doesn't even work online and it runs fine locally. Infact you cant even click on the .pngs and they aren't positioned the same with the css as they are viewed locally. I've overwritten the css with the up-to-date stylesheet many times as well
View 5 Replies
Sep 1, 2009
I have decided to attempt making my sisters website. I have used an XML gallery in the website and all works well when viewing the website just in flash, .fla or the .swf file. My problem is, when i come to put it into dreamweaver ready to upload and I preview it in Firefox, or any other broswer, all the pages work but no the XML gallery? Im gettin very stressed out now as all my file routesetc are correct?I have googled the problem and all I have found out is that it could be something to do with security?Does anybody know how to resolve this problem
View 4 Replies
May 17, 2010
I have one .swf that loads a second one on level 2.level 2 then in turn loads variables from a text file .The problem is that it works locally, but refuses to work on the server. The urls are all local. This is such a simple procedure, I can't figure out what is wrong..... are there limitations doing this via server vs. locally? I never get any "file open" errors locally. I've spent 2 hours on this.... I'm just using a simple LoadVars similar to this example:
Code:
loadText = new LoadVars();
loadText.load("text3.txt");
[code].....
View 5 Replies
Sep 1, 2009
Im in my first year studying a web design course, over the summer I have decided to attempt making my sisters website. I have used an XML gallery in the website and all works well when viewing the website just in flash, .fla or the .swf file. My problem is, when i come to put it into dreamweaver ready to upload and I preview it in Firefox, or any other broswer, all the pages work but no the XML gallery? Im gettin very stressed out now as all my file routesetc are correct?I have googled the problem and all I have found out is that it could be something to do with security?
View 1 Replies
Aug 23, 2010
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies
Jul 19, 2011
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Replies
Aug 28, 2010
close another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 Replies
Oct 8, 2010
Only just getting started on this whole domain of learning, so go easy!If I set up a P2P video/audio chat (similar to the sample VideoPhone thing on the Cirrus site), can I get the stream from both parties to send to a server at the same time so that I can record it? If so, would I have to use a FMS to stream it to and perform the recording (and if so which version could I get away with)? Are there any (preferably free, or just tutorialised) solutions for the recording side of things?
Currently it seems like the only option for doing the P2P thing is to use Stratus/Cirrus unless I use FMS4 Enterprise.
how effective this kind of situation can be, in terms of quality of the stream and recording? Does any of this make sense?
View 1 Replies
Jul 26, 2010
I've had FMS running on my local machine for a while and have had a little experience writing FMS apps, but I've just tried recording audio for the first time using the standard vod application and I keep getting a "Write access denied for stream" error. My AS3 code is copied and pasted for various examples and am confident that it works.
I'm running Windows XP service pack 3 & FMIS 3.5.
I've had a look at the vod/media directory and under windows->properties the read-only attribute is ticked. Every time I un-tick this it reverts back to being ticked. I've googled this and MS say that most programs ignore the read-only attribute and that it only really applied to files. I've also tried the MS fix for setting the read-only attribute via cmd and still no joy (doesn't fix read-only attribute or FMS recording the audio after setting via cmd).
I've also tried our dev server install of FMS (running under linux) and am getting the same results.
Here's my AS3 code...
private function initApp(event:Event):void
{
removeEventListener(Event.ADDED_TO_STAGE,initApp);
[Code].....
View 1 Replies
May 9, 2011
i test the fms 4 update 1 rtmfp streams multicast after 10 minutes i get this message RTMFP Multicast stream has exceeded max duration allowed; closing stream. but i do not use IP multicast
[Code]...
View 3 Replies
Mar 9, 2010
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
View 3 Replies
May 24, 2010
I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 Replies
Aug 27, 2010
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
View 2 Replies
Dec 12, 2011
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
View 2 Replies
Jul 7, 2009
I have a mp3 player that i purchased from a site. It works fine on my local drive but when uploaded to a server (and I've tried both Linux & Windows) doesn't work. It loads in setting & the mp3 file names from an XML file. I was able to verify that the XML data is in fact loading. The hitch seems to come when trying to create and load the XML data into an XML object.I added text field & changed the value of the text property at different points of the script to narrow down where the script gets stuck. The exact line of code that doesn't run from the server is:
Code:
var xml:XML = new XML(e.target.data);
I tried adding a crossdomain.xml file that allowed all domains but that didn't seem to help. Below is the code that loads the XML file & calls a function when loaded with the offending line of code.And my test site is here: SWF
Code:
public function MusicPlayer() {
//Security to load music
Security.allowDomain("*");[code]..............
View 1 Replies
Mar 23, 2010
flash works on local machine but not server?
View 1 Replies
Nov 14, 2011
I'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
View 6 Replies
Dec 11, 2011
Can I re-stream a stream from wowza to fms 4.5?I have a wowza stream with the url similiar to URL... Is it possible to restream this to fms 4.5?
View 3 Replies
Apr 28, 2010
One server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 Replies
Sep 1, 2011
in the standard embed code:
[Code].....
the player "FlashMediaPlayback" is loaded from remote ftp adobe server.
How can I load the player from my local machine?
View 1 Replies
Jun 25, 2010
I'm running FMS 3.5. My live streams and recorde streams work fine. Whenever I am in the Admin console though, nothing displays or reports. These screen shots are displaying the FMS server activity while several videos are being streamed around Europe:
View 1 Replies
Jan 2, 2011
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 Replies
Dec 2, 2007
I have a news ticker that I modelled after the kirupa tutorial that was given:
[URL]
When I run it on my local machine it works just fine the way I expect it to. However when I put it on my website, it does not work at all. I have another flash file (.swf) on my webpage which is just a simple countdown timer and that works just fine so I don't think this problem has anything to do with MIME types.
Here is the code I used to embed the .swf file onto my website:
<script type="text/javascript">
var so = new SWFObject("http://428the.calvin.hostingrails.com/XMLParser/sports_ticker1.swf", "headerAnimation", "390", "180", "0", "#FFFFFF");
[Code].....
Neither of these worked. I just have no idea what I am doing wrong. I don't know if there is something I should be coding differently in my actionscript. I am very new to AS programming. how to get the .swf file to appear on my website would be great.
View 2 Replies
Aug 19, 2011
Has there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
View 7 Replies
Mar 30, 2012
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
View 1 Replies
Sep 30, 2010
What would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
View 3 Replies
Nov 14, 2011
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 Replies
