I am using Flash Live Media Encoder 3.2 to stream live ADUIO ( without clicking on video check box) since I am streaming Radio news only. The server is at When I choose to Save File As, it came out a .flv , and can't play back, eventhough its a 129MB file. But if I chose the video check box which straming with video , it came out fine.
View 1 RepliesI'm using Flash 8 and I'm having an issue getting back to the main stage once a movie clip has played. I have my file set up with three movie clips on the main stage. One just plays which is the banner, there are two rollover buttons on that mc for panel1_mc and panel2_mc. When you rollover to view panel1 it plays fine, but inside I have another button to take you to panel 2. That wont work...this is what I have for code for the button inside the clip:
[Code]....
I stream some h264 videos to my application in FMS3.5， the videos can be played in FMS, but don't work in the local playback, <s:VideoPlayer source="test.f4v" x="31" y="18" width="402" height="206"/>. I get some h264 videos from FMS application "vod", they work well.
View 6 RepliesFlash Media Interactive Server 3.5We currently have an Edge/Origin configuration. We have another Origin Server to be used for fail-over. How do you setup a back-up Origin Server?
View 4 RepliesI was just curious as to whether or not it is possible to broadcast a live stream and then be able to push in, let's say for familiarity, a commercial? I have tried to find some information on the Flash Dev Net area, however, I don't think it leans towards what I am aiming for.
View 1 Repliesflash media server ,provide property Microphone.names that retrieves an array of strings reflecting the names of all available sound capture devices. is there is any property that detect output device attached to system so i can select which one to play back sound. for example:- i need to play back mp3 file in flash. but i have more one output device installed in my pc. the question is:- is there is any way for falsh to list all (or detects) audio output device installed in my pc then let me pick one of them to play back sound by selected output device?
View 7 RepliesI want to implement an internet chat application, I mean, I want a front end, which connects a web cam (mic and speaker). So, I can send videos and audios to a back end server (do flash streaming? but I am not sure what good product out there I can use), and also send both A/V to another computer on the internet. In other words, need a front end that sends local a/v from webcam (&mic) to backend and receives remote a/v from backend to webcam (and speaker) + backend streaming server.
View 4 RepliesI have this sample code from the e-book: "Learning Flash Media Server 3". The purpose of the code is to create a FLV. The code is not running as it should. When I click on the 'record' button, the label is to change to 'recording', that dosen't seem to happen and also when I click on the 'Stop Record' button, I get the following error:
"TypeError: Error #1009: Cannot access a property or method of a null object reference.at MinRecord/stopRecord()"
[Code]....
My deduction is that the 'if' statement in the 'startRecord' function is not resolving to 'true' and hence the label is not changing to 'Recording'. Also I feel that the assingment to the variable 'ns' of type NetStream is not being done and hence in the function 'stopRecord' I get the above mentioned error message when I click on the stop button. How do I rectify these problems?
I use video player from the flash media server and it will playback url.. as this originates from Flash media encoder then i have to enter this on the videoplayer but when i replace localhost with my IP address i get no joy at all. Also i can run url...ok from videoplayer in the media server but it allows the user to use http so how is this achieve as i cannot get it to work at all. tells me there is no connection. also this i try using local host and my IP address as well but no joy.
View 4 RepliesI am publishing video content to FMS with my program to livepkgr application. After i start publishing the vidoe content, files like .bootstrap, .conrol, .f4f and .meta are gettign created inside the livepkgr folder's my stream folder. But when i try to playback via OSMF player, the player is throwing error 1009. This happens for some few minutes. After some 4-5 minutes, the player start playing the live video content properly (.f4f file size is not getting updated for those few 4-5 minutes)
View 2 RepliesI'm trying to record video from the users webcam and play it back at a later date.
I call
[Code]...
However, when I look at the FMS Admin Console at the streams in app/_definst_, their types are either "NetStream" or "Live". If they were being saved wouldn't they say "Stored"? After I close the application doing the recording, the "NetStream" type stream disappears, and after a while all the "Live" typed streams are gone too. Nothing is saved.
I have no idea what is happening. I don't know if it's a problem with my AS3 code not closing the recording properly or if I'm doing something else wrong, or maybe somethgin isn't right in the FMS?
I recently used one of those XSPF Flash player buttons on a website and of course it worked, played back music automatically, stops when you click button... but one weird thing I noticed is the song being cut off before it ends... One song I have is 4 minutes long, and only plays for 1.5 minutes..
View 1 RepliesI was wondering if it was possible to store the order of objects being played and then later call up that sequence to be played back.For example:[code]so if the order that was played was movie clip a,c,b,b,b,d,a - is there an array or var I can use to store this order and then once the user puts in a comman to play it back, flash does play it back in the correct order?
View 5 RepliesI am building an as3 site where users upload a 5sec audio using there micraphone on there computer. The audio tracks are saved to the server. I am looking for a script that will dynamically merge all the tracks into 1 track to be played back on the site.
View 0 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I need to move recorded media files at my fms account to some other ftp account. How can i achieve this through server side scripting.
View 2 RepliesI am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.