I stream some h264 videos to my application in FMS3.5， the videos can be played in FMS, but don't work in the local playback, <s:VideoPlayer source="test.f4v" x="31" y="18" width="402" height="206"/>. I get some h264 videos from FMS application "vod", they work well.
View 6 RepliesCurrently I am working on FLVPlayer using AS3 and FMS3. When I test tthe connection
Traced NetConnection.Connect.Success And I had added eventlistener for NetStream. It also shown NetStream.Play.ResetNetStream.Play.Start But the video is not showing.
today I install fms3.5 on my pc.
1)I can use rtmp://localhost/vod/mp4:sample2_1000kbps.f4v , it works ok. But when I use rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v, I got Netconnect.connection.rejected. 192.168.8.3 is my fms server IP.
2)When I set fms use port 1935 and 80, rtmp://192.168.8.3/vod/mp4:sample2_1000kbps.f4v works ok on other pc. But using wireshark(Wireshark is a network protocol analyzer for Unix and Windows.) I found , the flash player connect 1935 port at first, it send "connect",the server replay "connection.rejected" and "no scope "vod" on this server". Than it connect to 80 port, so I see the video is not send throw 1935 port with rtmp, but throw 80 port with rtmpt. Why? How can I see video throw rtmp?
I'm trying to publish video streaming over internet. I want to use the h264 codec in FMS for that. Is there any in built property or setting to use h264 or have to use library for that. And also want to know among VP6, sorenson and 264 which is better to use.
View 6 RepliesI have created an swf where I can record the webcam picture as H264 video to a FMS 4.5 (I am using the developer version).My code is looking like this:
var h264Settings = new H264VideoStreamSettings();
h264Settings.setProfileLevel("baseline", "1.2");[code]....
I can then replay the video from FMS just fine, but if I try to copy the video from the FMS application directory into a local project and try to play the video with the FLVPlayback component, or with the Adobe Media Player, it is not playing at all.Is this to be expected? Can't I record a webcam video with FMS in H264 and use that video later without FMS?
Same file streamed from FMS4 (same on 3.5) with rtmp protocol has very poor quality compared to real file quality. Is there some low level configuration to do on Flash Server? Is the streaming server making some kind of transcoding before sending the stream? Or it can be Flash Player? Tried unchecking "hardware acceleration" but nothing changes. I am on a local gigabit network, so no network bottlenecks. Video seems very pixelated on the edges (not soft/antialiased). These are the file details:
[CODE]....
1. I entered a url in a video player : rtmp://10.0.0.1/vod/mp4:sample1_1500kbps.f4v
2. this video doesn't exist in 10.0.0.1 server. it is exist in 10.0.0.2.
3. the server 10.0.0.1 connect, play, and resource not found.
4. server 10.0.0.1 know that this video exists in 10.0.0.2 ,then redirect the whole url to 10.0.0.2. such as rtmp://10.0.0.2/vod/mp4:sample1_1500kbps.f4v
I thought that FMS3.1 supported f4v files but I cannot get mine to play. It says it cannot find the stream specified but the file is right where all my other files are that do play fine (both flv and mp4 files). Am I incorrect in thinking that FMS3.1 supports f4v files or do I have the wrong code?
[Code].....
How do I record a live stream in FMS3 and make the recordedstreams available in the VOD folder?
View 5 RepliesI've spent the past 2 days scouring Google and dozens (easily over 100) websites trying to find an answer to something that people do every day! I am absolutely shocked that this info is not available anywhere online.
A simple FMS3 and AS3 and RTMP and FLVPlayback example. totaly not simple and not possible to find
[Code]...
I'm currently working on a webcam recorder to record high quality video. I had the recorder working before, but the video quality was quite poor. Instead I'm trying to use a client side buffer and then upload the buffer after recording has stopped. I thought after I unattached the video and audio from the NetStream that either a NetStream.Buffer.Empty or NetStream.Record.Stop event would be sent when the buffer was finished uploading.
What is actually happening after I start recording is two NetStream.Record.Stop events are being sent in a row, so recording never really happens. Also, on the server side I'm trying to save a user name and password into a variable, but I'm not sure how to go about doing that since the application script is just a bunch of callback functions.
I am trying to record a H264/AAC streamin FLV format on my FMS server and all I get in the recording is the metadata but no media content. Is H264 recording only supported in F4V?
View 1 RepliesI just tried to record a stream with the new H264 classes, PCMU as audio codec to FMS 4.5. with MetaData problem. I got only the half of MetData without any duration: neither any audio codec
[Code]...
We have 2 FMS 4.5 servers, one working as origin one as edge we are running our custom DVR application on Origin server, wich records streams. Clients are connecting to edge server and they can watch live or rewind back and watch recorded stream, the problem is after too many clients are connecting to edge server the rewind option becomes unstable, form our investigation we determined that rewind working bad only on that parts of file wich is not cached on edge server yet (caching is working fine when there are not too much clients).
We have currently upgraded from FLV Streams to H264, FLV was much stable and was able to handle much more connections.
The Signal is yuv or pcm stream , i use the fmle3.0 to encoding to the h.264 format.
Once started.the CPU utility rate is going up to the 100%. I want to konw,which kind of the CPU can support the live stream. In other words,My require is encoding the one live stream the cpu utility rate is below 30%.
I want to be able to stream a live video using Flash Media Live Encoder 3 using two options of 300 kbps and 150 kbps.I want to give users a choice of stream quality depending on their available bandwidth to maintain the live feed.I have set it up so that the Bit Rates are 300 and 150 and tick marks on: 1 and 2my FMS URL is correctin the Stream: box I have written: test1;test2The SMIL file has the following:
<smil> <head> <meta base="rtmp://live" /> <body> <switch>
<video src="mp4:test1.f4v" system-bitrate="150000"/>
[code].....
Probably this feature is in the next generation of FMS 4.5 However, it is said this can be achieved with some manipulation of files with current FMS. Can we do a 2-way live video session.
UserA(in webpage flashplayerV11 beta: encode using H264) -> Flash Media Server -> UserB at iPhone(either HTML5 or others to play the live video in RTMP/RTMFP)
Next step will be the reverse:UserA(in webpage flashplayerV11 beta: decode using H264) <- Flash Media Server <- UserB at iPhone(either HTML5 or others to publish the live video in RTMP/ RTMFP)Better to use UDP based.Seems the HTTP live streaming incurs huge delay 4-8sec; not really working for live video chat sessions.. So how Skype handle this on iOS? with its own encoding/decoding?
I am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:H.264 BaselineLevel 5.1Keyframe freq. 5 seconds25 FPSInput size: 1280 x 720 (720p)Output size: 1280 x 720 (720p)Bit Rate: 1000KbpsWhen I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration?
View 2 RepliesWe just shipped Xuggler 3.4 this weekend which now has the ability to record and publish RTMP streams. That means you can now write Xuggler (a Java API for encoding and decoding video) programs that can publish to FMS or record from FMS.
We've worked closely with the FFmpeg team to get the core RTMP stack into that project, and have put together a tutorial on how to use FFmpeg to record or publish streams, including re-encoding media to H264/AAC while publishing.
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI just met a piece of error log when I was trying to resume the paused mp4 streaming. Here is the log from the server:
[INFO] [NioProcessor-1]
org.red5.io.mp4.impl.MP4Reader - Frame
position was not found for timestamp:
92000
I'm using Red5 newest 0.9.1 final for mac os x to stream the H.264/AAC encoded MP4 file to my flash app.
And there's no problem when I'm resuming the .flv file.
I am using Flash Live Media Encoder 3.2 to stream live ADUIO ( without clicking on video check box) since I am streaming Radio news only. The server is at When I choose to Save File As, it came out a .flv , and can't play back, eventhough its a 129MB file. But if I chose the video check box which straming with video , it came out fine.
View 1 Repliesin the standard embed code:
[Code].....
the player "FlashMediaPlayback" is loaded from remote ftp adobe server.
How can I load the player from my local machine?
I managed to make a local streaming (connection) to the server,by seting the FME at rtmp://localhost(or my IP)/live.But now i want to make a non local streaming.
View 2 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replieswhen i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 Replieswhat will be the best way for video conference without any delay for multiple users(200-300). How it can be possible with FMS and Flex?
View 3 Replies