While streaming the DVR i get the following error "ReferenceError: Error #1069: Property onTimeCoordInfo not found on dvrlive and there is no default value." here i have attached the code i did am i want to do anything more? i didnt use any server side code. DVR publishing script
[Code]....
I am developing application for recording the video in mp4 format with h.264 codec and I am able to record video in mp4 format with h.264 codec, but when I am compiling the Swf by "CTRL+Enter" at that time I am facing error "VerifyError: Error #1014: Class flash.media::H264VideoStreamSettings could not be found" and when I am publishing Swf by "ALT+Shift+F12" then I am not facing any error,what step I need to do for removing the error.
View 3 RepliesSome users are unable to access any of our video content, getting a Server Not Found error.We have our FMS configured to use ports 1935, 433, 80. Our firewall is allowing RTMP traffic to each of these ports. Is there something more I can do from my end to make sure users can access our FMS?
View 1 Repliesok, so I got the broadcast running as SE suggested, everything is running smooth local and live except for one thing.every 45 seconds or so, I the encoder displays an error while broadcasting. the broadcast however continues, so I went to the error log in application.00.log. and this is what was there:I'm assuming it has something to do with the length of the file, when I look in the folder that saves the broadcast, is dozens of files that have approx size 1 mb. As the broadcast goes, I see the file being created, and then when it reaches about 1 mb, a new one is born. it ?
View 10 RepliesAccepted a connection from IP:42.159.56.116, referrer: http://hh.dyndns.org/swfs/StrobeMediaPlayback.swf", pageurl: "http:/hh.dyndns.org/live.htm?source=rtmp://hh.dyndns.org/live/livest ream&type=liveSending error message: Method not found (FCSubscribe).
View 1 Repliesfunction Function() {}Error #2044: Unhandled AsyncErrorEvent:. text=Error #2095: flash.net.NetConnection was unable to invoke callback onBWDone. error=ReferenceError: Error #1069: Property onBWDone not found on flash.net.NetConnection and there is no default value. at MinCam()
[Code]...
I got this error when i am trying to connect on rtmp://172.31.14.91/live/livestream. Accepted a connection from IP:172.31.14.91, referrer: , pageurl: Sending error message: Method not found (getStreamLength). I don't have any problems with vod but on live streaming is so hard for me to get it.My encoder is a Media live encoder 3 and the media server is media server 3.5.
View 1 Repliesi have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
I recently upgraded from FMS 2 - FMIS 3.5.Over our internal network videos stream like a dream!However, accessing them from outside our own network means that they take about 20 seconds to load, or sometimes just get a message saying the server isn't found.This wasn't a problem with the FMS2 and there have been no changes to firewall settings or anything like that since the old server was up and running without problems.I have the new server set to use exaclty the same ports, but wonder if there are some other settings which could be causing this?Networking isn't really my area of expertise, and I have no idea where to start looking to improve things.
View 2 RepliesRandomly on Sunday night the FMS Admin Console which you can access via [URL] stopped working, as in it would not load. It times out and Firefox says 'Server Not Found' It was working fine on Sunday morning and has been doing for a year now, I rebooted the server and that did nothing. I have no idea why it will not load as the server runs fine and I can still stream and everything.
View 20 RepliesI am trying to install FMS 4.5 on Fedora 15 x64 server. I have downloaded the fms 4.5 development server and extracted the files. Now, when I type the command:
[Code]...
We are testing Flash Media Server 3.5 with Flash Media Live Encoder 3. Right now we have the problem, that we can not connect from FM Live Encoder 3 to FMS 3.5 running on the localhost (M:AdobeFlash Media Server 3.5Apache2.2). Both running as Standard Installation on the same System (OS: Windows XP SP2). The User is not found. So where do we have to setup the user, so that the connection is possible
[Code]...
The line: Master process not found, or multiple masters
appears in /var/log/messages of a Centos server running FMS 3.5 right around the time Flash videos stop working on a site we built. Oddly, nothing appears in /opt/adobe/fms /logs/ master.xx.log at the corresponding time*. Is there likely to be any more illuminating information somewhere on the server, to help us identify what caused Flash to stop working?
Currently I am working on the Http Live streaming for the ios device. I am following the steps given by the link below, [URL]. Even though I'm following the steps given, I didn't get the Live Stream. I could not find the hls-live folder inside the application folder of the Fms 4.5. When I typed [URL] in the browser, it displays as "The requested URL / hls-live was not found on this server".
View 11 RepliesThe company I work for installed FMS on a server running Centos for a customer who needed streaming media capabilities. It worked fine for 3 months until today the customer called us and informed us that their client program can no longer connect to the streaming media server. No one has done anything to the server to cause this to happen. When attempting to access the admin console to diagnose the program, the streaming server returned a 500 Internal Server Error. So I tried another page. Same result. Reboots of both the hardware server and the FMS have changed nothing.
View 5 RepliesI'm trying to set up a dynamicstream for the first time but am getting these errors:1046: Type was not found or was not a compile time constraint: DynamicStream.1046: Type was not found or was not a compile time constraint: DynamicStreamItem.Do I need to import something in order to use the DynamicStream class?My script is:
import fl.video.*;
var nc:NetConnection = new NetConnection();nc.connect("rtmp://localhost/vod");
var ds:DynamicStream = new DynamicStream(nc);
[code].....
I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.In the Flash software I try and set the source of FLVPlayback component to rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
View 12 RepliesDear community, i am searching for 6 days for a solution but i couldnt find. I installed the trial version of Adobe Media Server 4.5. I am trying to host live stream and it is working without error. but when i activate protection (PHDS), server gives en error code: 20...
Here is the server log...
After i could take the Live HDS, i made these settings as described at [url]
My application.xml and event.xml files are:
im using FMS4 as origin server and connect to FVSS from CDN, whose FVSS version's FMS3.5. with this all, when it's played with flashplayer from CDN every each connect require just wrote sth in the server log file as below:
Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Connect : rtmp://live.mywebsite.com:1935/2011/monitor/
and due to these frequent errors the CDN Edge service would get shuted down. but after i changed the FMS4 into FMS3.5 with origin server everything just worked well.Now my question is, is that a bug with FMS4 or? and what can be done so far if we want to go on use FMS4?
I am using the NetStream class with FMS to record the audio stream from the client's microphone to the FMS server.So far so good, the stream gets saved to the server as a .flv file. A php script grabs this file via ftp and copies it to the user's file store.What we need now is to either record the stream directly as .mp3 OR convert the recorded .flv to a .mp3 file - and this is where it gets interesting.
POSSIBLE SOLUTION 1 (preferred solution), Recording stream directly as .mp3:refer to Actionscipt Reference for Flash CS4:
The documentation suggests that it should be possible to directly record the audio stream as a .mp3 file. NOTE: this is with the new version, Flash CS4.I have tried this with both an Influxis account and with FMS 3.5 dev on my local machine. Both return this error:
Error #2044: Unhandled NetStatusEvent:. level=error,code=NetStream.Publish.BadName
When I publish and record just as .flv it all works fine on both servers.Is this a mistake in the documentation,
We are recording live streams on a Flash Media Interactive Server 3.5.3 r824. In general, everything works fine, so there are no appliaction-issues. But sometimes (it is not reproducable yet) a stream stops recording without any notice or event in the application. All we can find is such a message in our core.log: 2010-03-05 03:30:00 4747 (e)2611178 Error from libmp4.so: No Space left in the stsd box. - 2010-03-05 03:30:00 4747 (e)2611423 Failed to record [...]16891_14351_RGtBCODxPR4cM8QfML9CuxqhHqutMwWX.f4v (Unknown Error). where i could start searching for the cause of this error? These streams are in general sent by Adobe Media Live Encoder.
View 4 RepliesI am trying to set up DVR streaming using FLME. I'm following this tutorial: http:[url]........I'm up to Step 2,
I put in the following information into the FLME:
FMS URL: rtmp://222.222.222.222/dvrcast_origin
Stream: mp4:sample.f4v
Then click 'Connect' , but I get an error "Failure to connect to primary server verify that your server URL and application name are valid and that your internet connection is working and retry". My server is a 32-bit windows 2007 VPS , with FMS running.I don't know if I set up the DVR Cast application correct. All I did was copy the dvrcast_origin into the installationdirectory/applications, then I started a new instance of dvrcast_origin with _definst_...Also, I am running the trial version of FMS, and DVR needs FMIS. Is there a way I can just run FMIS?
I try to establich the connection with asc file from applications/videochat $connection_string="rtmp://videochat/"; And I'm getting the result from media server
Connecting to the video server...>>The client does not have permission to connect to the application, or the application expected different parameters from those that were passed.>>The connection was closed successfully
We have a very simple webcam recording/playback application we're using in a mission-critical user assessment application.Users are given the ability to record themselves using their webcam and microphone, then review their recording and submit it for graded review.The recording application appears multiple times per HTML page, and while we can record and play back video, we have large numbers of instances in our core.log of the following error
Server detected a backward timestamp from [####]to [####] in file: [filePath]
While these videos will play back with varying degrees of reliability, they will often "hang" for several seconds at the end of playback before sending the appropriate NetStream.Play.Stop and NetStream.Buffer.Empty events, and will sometimes hang indefinitely.Further, they report inaccurate runtime metadata, causing our playback indicator and progress/scrub bar to function erratically.In any case, the functionality and user experience of the recording tool is substantially degraded and must be fixed in order to successfully deploy this tool.
Disabling NTP services is not an option, and further does not appear to be the culprit, as these errors occur on a large number of recordings.As recordings need to be immediately available for self-review before submission, running flvcheck on each recording is also not an option.We have tried a variety of fixes, including waiting to unpublish until the buffer is empty,reconnecting after every recording, forcing FMS not to reuse connections, and using separate NetStream objects for recording and playback.Nothing has eliminated these errors.Adobe support referred us to Tier 2 support, and I am in the process of contacting them, but I'm looking to exhaust all my options before continuing.Is there any reliable solution to the backwards timestamp recording issue, or do we need to find a different media server application for our needs?
We have two servers - one stores the media files and runs FMS. The other creates dynamic webpages. I have edited the 'dynamic stream' SMIL example on the media server, to include a full URL:
[code]...
If I open the standard FMS index page, the 'dynamic stream' example works fine. However, if I copy that code over to a page on my webpage server (linking back to the media server of course), I get a 'connection error'. The weird part though is that if I limit the 'switches' in the SMIL file to just one video, it works again, eg:
[code]...
It makes no difference which file I choose, as long as there is just one.I am using the same video player that all the examples use (FMS 3.5), so my thought is that something in that player is causing a cross domain security exception when it has more than one stream to choose from. I tried disabling the firewall, so it's not that, and I updated server.xml to point to a custom crossdomain.xml file:
<?xml version="1.0"?><!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd"><cross-domain-policy><allow-access-from domain="*.mywebpageserver.com" /></cross-domain-policy>
But that doesn't seem to have had any effect.
I'm trying to stream my webcam to my FMS Server, using AS3, but I get this error message:
[Code]...
I'm new in FMS Recently, i create an application to record videos from my camera and recorded it But, when i tried to play it in an HTML, i met errors. The .flv jumps to the end when the progress is in the middle.And i tried to play in an .exe, it plays well.
View 5 RepliesWe got in below message in the eventViewer. "Faulting applicaion FMSAdmin.exe, version 2.0.5.88, faulting module unknown, version 0.0.0.0, fault address 0x00d1bee0."
View 2 RepliesWe got in below message in the eventViewer. "Faulting applicaion FMSAdmin.exe, version 2.0.5.88, faulting module unknown, version 0.0.0.0, fault address 0x00d1bee0."
View 2 RepliesI have been following the Flash CS3 Portfolio website tutorial on [url].... exactly and haven't run into any problems until this one.I am getting this error?
Error #2044: Unhandled ioError:. text=Error #2035: URL Not Found. URL: file:///C|/Users/jennifer.donnelly/Desktop/DRENNANPROJECTSNEW/porfolio...[code]......