We are facing some perfomance issues in several FMS4 running on AMD Opteron. This servers uses a lot more CPU than the ones that we own that run on a similar Intel Xeon with the same load.
View 1 RepliesI install FMS 3.5 in a AMD Opteron system, it is able to streaming, but I am facing some service side script issue.
system is:
AMD Opteron â„¢ processor 885 2.4 GHz 1 Gb RAM
I have two FMS 3.5 streaming servers... Both have Windows Server 2003 x64 with 16 GB of RAM..I'm streaming from a common storage and my Application.xml file is like this:
<Application>
<StreamManager>
<VirtualDirectory>
[code].....
I need to assess whether we should move our service to more capable hardware. At present our bandwidth is about 25 megabit out of our gigabit link and typical CPU usage is about 10-40%. I want to know whether FMS will stream with less lag or does that purely depend on client upstream bandwidth?
View 4 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I need to move recorded media files at my fms account to some other ftp account. How can i achieve this through server side scripting.
View 2 RepliesI am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI need urgently to build simple streaming live video web application.i need to create some live video streams from webcamin one computer through my server to webcam in another computer is Adobe Flash Media Streaming Server is able to do it or only Adobe Flash Media Interactive Server is able to do it?if Adobe Flash Media Streaming Server is able to deal with live video streams is there any major difference between them like for example is it possible to record live video streams in Media Streaming Server? The only clear difference between them is the price.I can afford baying the Media Streaming Server bat not the Media Interactive Server and i need to decide before i am turning to other very less quality java based solutions.
View 1 RepliesWe will only use the servers for Live streaming and VoDs, so far no plan for any complex applications to be deployed on the servers yet. As
far as I understand, the bottleneck of streaming servers are with network connection rather than CPU or resources (servers are only support up to 4GB of RAM anyway).
I want to record a stream which is published with Flash Live Encoder to FMS 3.5, but split the recording in files with predefined length. For example if a stream 'webcam' is published I want to record it in chunks of 10 minutes: 'webcam1.flv', 'webcam2.flv' ... From what I can tell there's no facility to work with timers. The only solution I could think of was using stream.record() with a time limit parameter but that seems like a hack because it triggerstStream.Record.DiskQuotaExceeded on the stream when the recordin should stop and start recording another chunk. Has anyone done something similar?
View 10 RepliesIs there any way to check which version of flash media server is installed on my computer?
View 5 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 RepliesI evaluated the Flash Media Server 3.5 by running samples for .flv,f4v,.mpg,.avi video formats and the product looks excellent to work as a Video Streaming Server - Live Video, Recorded Video Viewing by Audiences.
Query : ELearning Course modules are designed and developed using Macromedia Flash and Action Scripting Language.The Output Formats of the LMS are .swf files.As Elearning courses - LMS offer/involves User Interaction (Viewing courses by Students, Giving Exams for obtaining certification etc).Can we also use the Flash Media Server 3.5 for integrating with LMS Site running in IIS 6.0/7.0 ?
Client : IE 6.0/7.0, Macromedia Flash Player 10.0.
Port 1935 on my server as i think this is why my streaming in flash med ia server does not work
View 5 RepliesI have FMS 3.5 (Streaming Server) installed, and I am trying to have it render media from locations other than default. Here is my setup.
[Code]...
Basically I am trying to render media specific to different departments (test,test1). So "Department Test" media files are under [E:ContentFMSapplicationsvod est] and "Department Test1" media files are under [E:ContentFMSapplicationsvod est1]