Professional :: Array For External Swfs
Jan 5, 2011
I have a menu files that loads all the swf clips I have in another folder.I did it in an array so that it calls to the clip and then plays it in the movieclip I have in the menu flash file.And yes, I use Actionscript 2.0.My question is, how can I make a player control that will skip to the previous swf that has been played.I have a rewind button already, but it doesn't rewind through the previously-played swfs.I'm trying to think of a code that will load the previous swf file played in the array when a button is clicked.Similarly, I would like to do that with a forward button and simply have it move to the next swf in the array line up.I'll just tweak a little bit of the code I'd have for the previous swf button.I just don't know where to begin.It seems like I almost have it figured out, but I'm just missing a key element.
View 16 Replies
Similar Posts:
Jan 21, 2011
How can I load external swfs, store them in an array, and then have the ability to retrieve any one of them for later use when I want to?
View 5 Replies
Sep 2, 2006
[URL]regarding this tutorial I started my site [URL] to get some trasition effects but im getting somewhat different since the external SWFs take time to load. isn't it better to create "intro and outro" on the same time line instead of loading external SWFs bcos once the movie loaded as a whole will lead to smooth and contineous transitions.
View 1 Replies
Jan 11, 2010
I have a project where I am externally loading .swfs into my main scene. However at the end of my external .swfs I want it to go back to the first frame of my main .swf. I have used this code MovieClip(root).gotoAndPlay("start"); but I get this error
ArgumentError: Error #2109: Frame label start not found in scene Scene 1.
and I understand why I get the error because the frame label start isn't in that external flash file it is in the main one. However, I just don't know the correct AS3 to get this to work properly.
View 6 Replies
Jul 6, 2011
I have a flash file, which I am using as the index for my site. Into this flash file, I have an external swf that loads for an introduction. In this external swf, the as is set up so as to be a full browser, scalable slideshow. The index swf has a horizontal menu bar, from which other external swfs can be loaded. As a side note, I don't know if this is indicative of something... the preloader also does not want to work with the externally loaded swf, but will work when a dummy photo placed in the main swf file.
When I bring this into dreamweaver, the swf that was loaded into the index swf is no longer full browser, allthough it works when I preview (ctrl + enter) from within flash. It does not work from within flash when I hit f12. Yes, the html wrapper is exported at 100% width and height. All the files are in the correct place, within the same folder. Also, the preloader doesn't work but it wasn't working from within flash with an externally loaded swf. getting a full browser flash external swfs to work once the main index swf is brought over into dreamweaver?
View 3 Replies
Jun 29, 2010
My client wants to take all the Flash games on their website and put them on a portable device that's not connected to the internet. I need to make sure that the swfs are completely self contained, in that they do not require the internet to load any swfs or other assets. The client does not have any of the fla's, so my plan is to download the swf and decompile it with Sothink, and then search the AS for these methods:
URLRequest
loadMovie
loadMovieNum
If the search returns results then I'll assume the game is loading something and that game will not be used. The client doesn't want to put any development time into this, so it either goes on the portable as is or not at all.
View 6 Replies
Sep 15, 2010
I found this code for loading external swfs and playing them in succession.
It works when I use the external swfs that come with the code, but not when I try to use any other external swfs.
I can't figure out why - does anything seem obvious (the clip swfs are here [URL]
// Array of external clips to use. Variable index refers to next clip to be displayed.var clips:Array = ["clip0.swf", "clip1.swf", "clip2.swf"];var index:int = 0;
// Stuff to load swf filesvar thisLoader:Loader = new Loader(); thisLoader.contentLoaderInfo.addEventListener(Event.INIT,
[Code].....
View 9 Replies
Aug 15, 2005
I recently created a site using the "Transitions between External SWFs" tutorial for Flash MX 2004. I use this to load the sections of my site into the main movie file. Each section is an External SWF file. When a viewer clicks on a navigation button, the specific external swf move will load and play. Currently, a viewer would need to click on another navigation option to close the current external swf file. I would like to add a close button to each of the external swfs so that a view has the option to close the window without clicking on a naviagtion link.
View 12 Replies
Nov 19, 2010
I'm trying to load a bunch of external swfs into a tile list. Once the swfs have been loaded I'm adding them to a dataprovider which I then sort and add to the tilelist. Like so:
dp.addItem({label:e.currentTarget.content.getLabel(), path:e.currentTarget.content.getPath(), source:e.currentTarget.content, cost:e.currentTarget.content.getCost(), category:e.currentTarget.content.getCategory()});
It works fine except that the way I'm doing it I have to add a bunch of functions to each swf to know which one is loaded and pass the correct info to the dataprovider.Is there another way to tell which swf has been loaded? Something like this.URLRequest. If I could tell something about it I could compare that to my original xml and find out all the other information I need for my dataprovider.
View 2 Replies
Jul 25, 2011
I'm currently developing a game in flash and want to be able to divide up my .fla assets in a way that means artists can work on a game menu .fla in isolation from the game.fla and rest of the game code.If I could briefly explain how I've approached this so far, I would be extremelyMy project is setup like this:HighScoreMenu.fla -> document class HighScoreMenu extending GameMenu class.game.fla ->document class game.asgame.as class loads the published HighScoreMenu.swf and manipulates the menu i.e. animates on and off screen via inherited functions in the GameMenu class.
Now this seemed to work to begin with, until my code evolved and upon going to publish my HighScoreMenu.fla flash started complaining about symbols being used in Game.as that were in Game.fla... If I'm only publishing the HighScoreMenu which extends from GameMenu then why is it even looking to compile Game.as
View 4 Replies
Sep 11, 2009
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 Replies
Nov 13, 2010
I am loading eight external swfs by way of eight buttons with actionscript to remove the swfs and sound after a new button is clicked. This works fine except that as soon as you get to the frame where the actionscript is all the swfs load at one time on top of each other. I don't want any to load until the button is clicked for the right one. MouseEvent listener works but only after all the swfs have loaded. How do I get the swfs to load only when the buttons are clicked. I can't figure out what I am doing wrong.
[Code]...
View 5 Replies
Jan 5, 2011
Someone here recently helped me immensely with a question I had about creating a previous button in my flash file that would allow the user to click on the button and view the previous swf file. I'm hoping someone can help me with making the Next button now, too.
I have a movieclip that loads an array of external swf files. I thought making the next button would be as simple as changing just a select few things to the previous button.However, that's not working. When I try that, the movieclip doesn't even load the swf files. Below is my AS2 code for my file. I bolded the part at the end that is for the previous button. Does anyone know how to make the previous button?
[Code]...
View 16 Replies
Dec 7, 2011
I have figured out how to load an external video file - and I can play an imported audio file, but I can't seem to use either method to load an external audio file into an array.
Here is my audio code:
var tour_audio:Array = [tour1, tour2];
var my_num:Number= Math.floor(Math.random()*2);
var ChosenSound = tour_audio[my_num];
var playing:Sound = new ChosenSound();
playing.play();
Here is my video code:
var my_videos:Array=new Array ("link1.mp4", " link2.mp4", " link3.mp4", " link4.mp4");
var randomIndex = Math.floor(Math.random()*my_videos.length);
my_player.source = my_videos[randomIndex];
I tried "var tour_audio:Array = ["link1.mp3", "link2.np3"]; - but that did not work.
View 9 Replies
May 4, 2011
I have created a main "site.swf" file that loads a "default.swf" file into a container after a preloader. On this default.swf file I have buttons that needs to load new external SWF files in its place in the container. All of the external SWFs contain buttons and navigations that will also call up other external SWFs into this container. So, I would like to know how to program each button (some are movieclips as buttons) to unload itself and load the respective SWF into the container (eg. AboutUsButton to call up aboutus.swf into the container). I do not have a main navigation on the site.swf file bacause the navigation changes on each SWF that needs to be loaded into the container.
View 2 Replies
Apr 10, 2009
Specifically, I am building a flash page that loads external swf files and inside some of the external swf files, I would like to add audio and flash video (flv) streaming from the Flaash Media Server. In some of the external swf files, (using a FLVPlayback component) when you press a button on the main timeline to unload the current playing swf the audio/video continues to play after loading the new external swf file.So I believe that my approach is all wrong and I should be working to dynamically load the .mp3 and.flvs in the external swf ... my questiion is how to unload those assets when loading the new external swf
View 1 Replies
Apr 1, 2010
I have a simple array of SWFs that I want to load on top a menu/template swf - I want to navigate forward and backwards using two buttons on the template/menu swf. I can load one swf but I cannot figure out how to do this and navigate through an array of swfs.
View 4 Replies
Jan 30, 2009
I read the tutorial about transitions between external swfs and started implementing it! So as a good and ordonate guy that I am, I put the index.html in the root, created a style folder for the style and a folder for the swfs. I was struggling about one hour to find out why it wouldn't work, to find out that if I move the html inside with the swfs, being in the same directory, it worked fine!
View 3 Replies
Jun 23, 2009
I'm trying to use an array adapted from AS2 script to load random swfs called "koan_1.swf" or "koan_2.swf" etc into a "koan_loader_mc" on the stage. Each "koan_#.swf" has code in its last frame to both advance the "shuffle" array in the action script in the first frame of the stage and to load the next koan swf. The code below -- almost -- works, but....?
Frame on main stage:
// creates function called at the end of koan_#.swfs
function shuffle(a:Array) {
for (var ivar = a.length-1; ivar>=0; ivar--) {
[Code]...
View 5 Replies
Apr 4, 2010
I don't think I'm as familiar with arrays as I need to be to complete the following project - I've read about 60 posts and no one seems to be doing exactly what I am. Here's what I need to do: From a main swf (home.swf), I need to load 7 consecutive swfs in random order, (movie01.swf, movie02.swf, etc) from an array, into level 1. I need all seven to play without repeating, then repeat them in the same order in a loop.
But I ALSO need the user to be able to navigate through the swfs by using next or previous buttons (or by selecting individually 1-7, but that may be asking too much from my limited knowledge).Here is the code I'm using to generate a random ordered array:
var fileNames :Array=new Array("movie01.swf","movie02.swf","movie03.swf");shuffle = function (targetArray) {for (i=0; i<targetArray.length; i++) {var tmp = targetArray[i];var randomNum = random(targetArray.length);targetArray[i] = targetArray[randomNum];targetArray[randomNum] = tmp;}};shuffle(fileNames )trace(fileNames )
I assume from here I can load the swfs from fileNames [0]. I'm way out of my depth so the rest is a mystery to me.
View 2 Replies
Sep 28, 2010
I have a custom form that I want to implement and I am having a problem figuring out how to do so. I want to have it work like an inner popup where it blurs and unblurs the background imageHere's my setup:FLA file contains-UILoader for swf sectionUILoader for random background imageLets say I load a section called home.swf into the section loader. Within the home.swf I have a button for someone to call up the form.swf. Is it possible for the form to blur the random background image when loaded then unblur it when it's done? I also have no idea how to unload it.
View 1 Replies
Jul 16, 2009
I know this is a very basic question and one that I know the anwser to, but it's been a while since I've used Flash and the solution is escaping me right now. I'm loading external swfs into my main swf and they should just be playing automatically. When I test in Flash, the system works. Upon loading the swf into an HTML page, the system seems to shut down. It seems liike the exteranl swfs aren't even loading. This is what I've got so far.
[CODE]...
View 5 Replies
Feb 15, 2010
I am using this thumbnail gallery attached but instead of loading images through the xml I want to load external SWF'S. I also want to be able to control each SWF loaded in individually apparently in order to do that I need to give the container different instance names..however I don't know how to extend the code inorder to achieve this..
View 7 Replies
Apr 29, 2010
Im trying to load an external .swf, from one of those lazy-do-it-for-you photo gallery creators. Well, it just simply refuses to work
Ive tried using AS3 code straight off adobes site and i get this:
[CODE]
var request:URLRequest = new URLRequest("4melogo.jpg");
var loader:Loader = new Loader()
loader.load(request);
[Code]....
View 12 Replies
Nov 17, 2010
Does anyone know of some good Tutorials on creating a preloader for external swfs. something like, having a container swf that all my external swfs will load in and out of, including the preloader swf.
View 1 Replies
Apr 15, 2011
I've found this bit of code and it works for preloading my single 'Q1.swf' in an old AS2 project I did a while back. How do I adapt it to preload 5 swf's? Can I load them all to the same target mc or do I have to load them on separate levels or to different targets.I don't want to change the project to AS3 as the budget doesn't allow. Also will this work when the project is viewed from a CD as well as online?[code]
View 1 Replies
Jan 12, 2010
how can i load 3 external swfs into one movieclip at the moment i can only get it to load one or it may be loading each clip over the previous one.
View 3 Replies
Jul 6, 2010
I've got this down using ActionScript 3, but I am in over my head trying to revert back to ActionScript 2.
I have a main swf that acts as a shell and calls up external swfs via XML upon a button click.
I've read a number of tutorials over the past few hours, and have learned the basics of how to trace the XML information; however, I'm struggling getting the content to appear on stage.
View 3 Replies
Aug 4, 2010
I am working on a an automatic slideshow that's also clickable with buttons...I got the code to work fine on my sample file, but now that I brought it over to the actual file I need to make a slideshow out of - the external SWFs don't load all the way! The first default one loads ok - and the rest remain at about 80% Alpha...
//Import classes for easier use
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[code]...
View 1 Replies
Feb 17, 2011
The structure I have is one where I have a main.swf which loads an external swf named say external1.swf. Then external1.swf loads external2.swf. My question is when I remove external1.swf, is external2.swf also removed by proxy from the display list or do I have to explicity remove external2.swf using removeChild on the relevant loader?
View 0 Replies
