Professional :: Camera Pan And Zoom, 3D Navigation?
Aug 29, 2010I'm looking to create something in style with this (arrow key navigation), and despite being the creator of that flash movie, I've managed to forget the code.
View 1 RepliesI'm looking to create something in style with this (arrow key navigation), and despite being the creator of that flash movie, I've managed to forget the code.
View 1 Repliesmake the camera zoom as an animation plays from an entire body shot to a closeup of the head?
View 3 RepliesI am working on flash application TELESCOPE or Camera. My goal is to move around the scene and zoom-in or zoom-out I found that if I move scene, I have to move registration point, because I always want to zoom in the centre of my ocular. So far application works fine only if I move, zoom-in and than before I move any further, zoom-out! But when I move, zoom-in (not fully), move again and zoom-in again, the second zooming doesn't appear on desirable registration point
View 1 RepliesI've got to do a project with with 3d so have turned to papervision. Basically, I have 5 planes that I want the camera to rotate around but only to a point. When the camera reaches an x value of either -1000 of 1000 the camera movement should stop and not go past that value (but obviously the other way).Also, I need to add a function to click one of the planes and it comes to the front and fills the stage (it's aspect ratio will be the same as the stage). The code I'm using the standard Lee Brimlow tutorial code:[code]So basically, the cameras movement is restricted to between -1000 and 1000 and you can click on the planes and zoom into them so they fill the screen.
View 1 RepliesHow should I code/setup a camera animation where the camera zooms in on an animation (just cubes) and when it reaches the appropriate view the animation starts?
View 1 Replies1. I want to make the big yellow circle in the middle to acctually look like it is in the middle of the green rotating spheres... So it is sort of the sun and the rest are the planets... This obviously has something to do with swapDepths, but I am not to good at AS and I can't figure out how to do it!
2. I wish to make the green spheres each a seperate button, so that when you click one of them it falls from the group and the camera follows it (the camera, when following its fall, should also center it)... Then the sphere will bounce on an invisible surface (invisible surface is notable by the shadow created below the ball), come to a rest in the center of the page and then the info shows up...
I tried searching on it but I wasn't exactly sure what to search for.
[URL]
I'd like to know how to do the zoom out/in/around navigation.
I am doing something for a friend, a flash portfolio site, basically what happens right now is that when one of the pictures is clicked the stage zooms in so that the image takes up the entire stage, now on clicking that picture again, the image zooms out... that's all fine, the problem is that when i want to click on another edge of a picture that is also visible at the time when it is zoomed in, the whole thing zooms out
I'm not sure if i have to use an array, or a one more variable or what i have to do..
the site is at [URL]
i try to modify a file i got here: [URL] simply, i try to add more panels. tried to edit the vars, added mc's with a corresponding name, added more buttons, but on the 7th and further, no mc is loaded.
View 4 RepliesI am capturing camera on flex for android using air 3.1,and found that the camera is only showing the a part of of actual camera video.When i view camera using normal camera application in android galaxy tab, it shows full camera area but when i am capturing the camera in flex its showing only the center area for it.I tried using setMode to set the resolution, but its not of any use.Is there any way to get full camera area captured inside flex using camera.getCamera ?
View 1 RepliesFrom a Flash object, I would like to be able to detect the presence of a webcam that the user might grant access to, without actually asking the user whether they want to grant access. This is to streamline a large application that has extra features if a webcam exists — if there is a webcam, the application will present several dialogs that lead up to the normal cam-security prompt, but if the user doesn't have the hardware, I want to skip over them altogether. Requesting access to the cam before those dialogs won't make sense to the user.
It appears not to be possible to call Camera.getCamera() without the security prompt happening. Is there a workaround? (For instance, could I, perhaps, call getCamera in a hidden Flash object and inspect its return value, or does it block until the user acknowledges the security prompt?)
I have a video capture device on a machine. I have written a windows application to capture the video from this device. While capturing, if i try to broadcast using flash it does not connect. If i'm already broadcasting and then try to capture then my windows application does not get the capture pin of the device. So, flash seems to be taking the capture pin. Is there anyway to broadcast using the preview pin on the device so that i can capture using my application. Or is there way where i can split the capture pin and give one to my app and one to the broadcaster
View 10 RepliesUsually Adobe Flash applications can access any usb-webcam.I have a USB camera for microscopes which understands TWAIN and DirectShow.Is there a possibility to access the video data from this camera with flash?
View 1 RepliesI have a school project where I need to animate a stop-motion video. We used a Canon 7D to take pictures and I imported them in lightroom. What I need to do now is take all of these frames and put them together to make the video. I tried manually doing it, but it came out all shaky. There has to be an easier way then to manually do it like that.
View 1 RepliesI watched some videos on youtube, they are good but not in depth. Are there any good, easy to understand resources that how to use the virtual camera?
View 1 RepliesWhat makes a camera compatible with flash? I have a camera I purchased from IDS Imaging and it shows up in my camera list in as3 with print out the array made from Camera.names. But when I go to use it, it just doesn't show up. I do have a lens on it, and it can see it working when I used the IDS software provided for testing. I've also been able to make it work in c#, but I want to use it for a flash app I'm developing.
View 1 RepliesHave anyone have similiar experience work with GigE ethernet camera with flash app?recently need to test high resolution with high fps such as 1600x1200 @60 fps work with flash application or it required to via other C#/delphi/C++ programming to work together? In windows xp environmentall GigE are connected local, not to internet server.
View 1 RepliesIm currently working on a piece for my final year project that takes a webcam and has an old movie effect over it in as3. I have this all working but what I need to know asap though is, Is there a way that i could put a black box layer over it that when the user walks in front of the camera that the black box would disapear. The code I have in the actions panel for the webcam is:
[Code]...
I have a piece of code:
[Code]....
Which implementation is running here: [URL] I have Vista Bussines SP2 but problem also exists on Windows 7 Home Premium. On IE 32 bit the capture image is flickering on my moves. This is very annoing. I compile my project with additional settings: -swf-version=12 -target-player=11.0 On for example Firefox this work much better but problem also exists. And external library is set to newest playerglobal.swc downloaded from Flash Adobe download site.
Well I'm making an animation of the little mermaid for school. Right now I'm at the scene where the mermaid 1st sees the prince. and I want to zoom in on the prince. How can I change the direction of the camera, with it effecting the whole animation?
View 1 RepliesI want to have 8 cards on the stage, each card represents an animal and if you click on that card, it will flip over and zoom to fill the screen. When it flips over it will give a fun fact about that animal and in the lower right corner it wil have a 'close' button to bring you back to the stage where the other cards are.
View 1 RepliesI have to create a website banner intro. So what i want to do is that the picture (470x269) so I want to start with a close up on this person face up close and then fade back into the whole picture.
View 2 RepliesI want to create a presentation in flash (as SWF file) and I want that in the final SWF file there will be an effect that zooming into one of the stage's object, say for instance this is a picture I want to zoom in and out to/from it, so how can I do it and is this involved with actionscript integration or not?
View 2 Replieshow to implement zoom on a picture in a movieclip frame? I would like to do it with AC3 if possible?
View 2 RepliesI'm new to flash (as a developer, downloaded it 2 hours ago... :-p) and I've been customizing controls that I am already familiar with... It was a pleasant surprise to know that Flash Professional CS5 supports keyboard shortcut remapping, however I can't seem to get it to map Ctrl+Mouse wheel Up as Zoom in, and Ctrl+Mouse Wheel Down as zoom out...
View 1 RepliesI am creating a historical timeline and I want the viewer to be able to zoom in and out from the timeline. How do I do this?
View 1 RepliesI have a scene where I want to zoom in on a character's face, and after a while zoom out slowly into the background. I tried to tween all of the layers together but it plays out awful...any way to do it with the stage itself?
View 7 RepliesI have an project that when you enter a certain number and click a ''enter'' button, it send you to an image (forest picture, desert picture, town picture, etc). In these pictures, I've hidded some object. In exemple, in the forest picture, there's some blue birds, red birds, green birds, etc. I want people to find them and click on them to get some information about these birds. The thing is that these birds are hidden. When I open my picture with windows viewer, i can zoom-in and find them with the little hand toolso everything is fine cause I can find them. The problem is that when I export my project as an animation, we can't find the birds because we cant's zoom in. My question is, is there a way to zoom-in these images and navigate trought them (with the little hand tool) like we can do with windows viewer? Or is there a way to just Zoom-in my animation?
View 5 RepliesWhen I zoom out, instead of centering the document on my zoom, it pushes the doc to the upper left corner. It is pretty maddening, as I am zooming in and out a lot.
Is there a way to manually center the artboard?
I want to make a scope wich can zoom in on button click and go back to previous stage (zoom out) also by clicking a button.Now i made it work for zooming in (when i click my button it zooms) but when i want to zoom out everything i tried didn't work .Here is the code:
//button for zoom in
zoom.addEventListener(MouseEvent.CLICK,glassMove);
function glassMove(event:MouseEvent):void{[code]..............