I have an flv movie file that I need to convert to swf and add an onclick event to it. I was able to do the first step by importing the flv movie and export it as swf. How can I add the onclick event? This swf will be an advertisement for a product and onclick I need it to redirect to a specific URL.
View 1 RepliesI am trying to open or import a .vob file in flash and want to convert it to Flash movie, How can I do that?
View 6 RepliesAnyone know of a piece of software that will allow to convert flash files into a movie file? (Without using a screen capture utility)
View 2 RepliesI have a simple movie consisting of 6 layers (photos). Each layer is set to display for 30 frames then fades into the next layer to give the impression of a slideshow. I have used a code snippet against the 1st layer so that if the mouse button is clicked it will go to a particular website.
movieClip_2.addEventListener(MouseEvent.CLICK, fl_ClickToGoToWebPage_6);
function fl_ClickToGoToWebPage_6(event:MouseEvent):void
{
navigateToURL(new URLRequest("http:blahblah.com"), "_self");
}
This works fine, however, once the clip goes beyond layer 1, if you press the mouse button again, it still goes to the web site specified even though I do not want it too. I have tried to add a second code snippet so that if it is on the 2nd layer it goes to a different web page and so on, for each layer, wanting it to go to a different web page. If I have more than 1 code snippet, as soon as it gets to the frame the snippet is on, it fails, and if I only have the 1 snippet, it runs for the entire duration of the clip
I have created a booklet in InDesign cs4 that includes page turn transitions. I have saved it as a SWF file and it works perfectly on my PC with the ability to sweep through the page turns. My issue is now, what type of file can I export the SWF file to so that I can view it on an iPad and am still able to have the page curls?
View 3 RepliesI'm building a flash piecve for aour FAQ section. I have an button instance controlling what show when a user mouses over a certain area. On click it displays the info box. What i need is a way when the user clicks, and then releases that the inlformation box stays, at least until another option is clicked.
View 4 Replies[URL].. How to bind onclick event to flash via swfobject?
For example i need to add onclick url, because there isn't built in url on click.
is there away to remove a text box when I click on another movie clip? I know how to add the eventlistener but just don't know the AS to remove the text box when the X is clicke
View 1 RepliesOne of the movieclips I have on the stage, Im using senocular's transformTool, to activate the transform controls (when that MC is clicked). But now I wanna have a different action if there is a SECOND click, but the MC isn't detecting any clicks anymore because the transformTool comes on top of the MC. Does it make sense or am I on crack?
View 7 RepliesI have a Flash AS2 application that is made up of many SWF files. I need to create an OnClick event in a container SWF that will work for every SWF called. I am trying to avoid adding code to every SWF (over 100).
Currently I can get access to the click in the container for the first SWF but when the second SWF is called it seems to overwrite the container.
this._lockroot = true;
this.onMouseUp = function(){
//if not on login
[Code]....
How do I make where a click in the container will be triggered even if the SWF inside the container calls another SWF?
I currently have a onClick event that resets my videos, but this 'reloads' them, is there a way to pause them or stop them without resetting them? <a href="#" onClick='resetVideo("vid1");resetVideo("vid3");return false;'> I currently have this event firing on a navigation button, but it fires every time its clicked (obviously), I really only want to stop a video if its playing - is that possible?
[Code]...
I have an image map with coordinates and event onclicks. I am not concerned about the image map coordinates as much as i am with the onclick event which is what triggers the parent application ( which seems to only recognize the event formatted in this way:
<area shape="circle" coords="169,380,16" href="#" alt="221" onclick="top.changeView('[Shared] CENTER', '221');" />
Is there any way to do this?At least for the onclick part? I'd like to add the imagemap onclick to a button.
Is it possible to convert a fla file to a mp4?
View 1 Replies3 buttons are called to the stage, and each button has an eventlistener that listens for a Click event. A switch statement is used to trace the clicks, but the only message i get is from the "default message"?[code]...
View 3 RepliesI would like to populate a combobox from XML file in Flash. Then, when a list item of combobox is pressed then thumbnail image of that particular category is being loaded in a movieclip from XML file.
I spent a hard time to achieve this, but there is no success.
I used this code so far to accomplish this task.
Code:
var myXML = new XML();
myXML.ignoreWhite = true;
myXML.onLoad = function(loaded){
[Code]....
I have all the files that created the SWF (this is something that was developed on my computer, not an SWF I took off the internet).
View 1 RepliesI did a 10 second animation in Flash CS5 and exported to a swf file, but my client is asking me a to convert it to a video file with this requirements:
Size: HDTV 720P. (1280 X 720) pixels. 30FPS. (Frames per second)Format: stream format: HDV-HD1. Stream Type: MPEG-2. Transport Stream(TS). Aspect Ratio: 16:9. Britate Type: CBR (Constant Bitrate).
Number of passes: 1. Video Bitrate: 18300
I tried some conversion programs to do the job:
iWisoft Flash SWF to Video ConverterE.M. Magic Swf2AviXilisoft Video Converter Ultimate 6Total Video Converter HD All of them recognizes the swf file fine, ( I set up the fla file with 1280 X 720 pixels and 30 fps) but when I try to export to a video format with the previous specifications using any of the programs, I get a very slow video, not smooth at all, and sometimes a large video with 2+ minutes (supposed to be only 10 sec). The swf file plays fine
My client will soon be wanting videos to be played on television screens in their stores.I'm pretty good at flash, and can knock up good looking videos no problem. However, how well does flash convert to a movie file (swf ---> mpeg etc)?
View 3 RepliesI have some PNG files with alpha numbered 'image0001.png' up to 100 frames. I want to import this as an animation (movie?) into Flash CS4. The docs for Adobe Media Encoder suggest there should be an "export stills as movie" option under Settings but I can't find it. What would be the best way to bring in these .png files into Flash?
View 2 RepliesI tried posting this in the newbies thread but no one replied. I want to use onfocus like onclick is used in this: this.onClick = function{...};
View 1 RepliesI downloaded some videos from youtube and vimeo , and when I doubble click on the file, its just an empty container, I do have Flash 8 and my friend helped me a bit to play the file by using Flash 8 , but whenever I wanna play the file, I have to have that Flash plyer in the same folder, can some1 be kind and help me a bit to convert my Flee or Flea , whatever is that called to a AVI or any other types of file , which Premiere can load !
View 6 RepliesI've got a avi file which I can convert to a swf or flv file. What I want to do though is put this on a website with a play and stop button. Progress bar maybe.
View 2 RepliesI have android 3.2 tablet application that displaying flash inside webView. now I want to catch event when pressing some inner item inside (it does't direct to another url..)
is it possible??
How do I convert a shape tween into a movie clip on a Mac?
View 2 RepliesMy boss needs me to create flash button 125px x 125px. And when they click on the button it will open up to the company web page. Here is footage the would like to use for the button:
Home Symbol Made from Hands | Royalty Free Stock Video Footage | iStockphoto.com
I have only done static banners using Flash. There is a difference between a Flash banner or button? I am still a novice and need to get this done by Friday.
How to convert a SWF file to FLV file? (using CS4-AS3) How to export to FLV file from the FLA file? (using CS4-AS3) While trying to export to MOV file from the FLA file (using File > Export option), the software blocks each time on "recording flash content" and basically I cannot export to the desired file formats (flv and mov).
View 4 RepliesI made several movies using symbols and motion twens and now wish to save these as an flv to play in a web browser.
View 6 RepliesI downloaded a youtube video which was an MP4 and used Flash CS3 Video Encoder to encode it to an FLV file. Actually improved the quiktime file. Anyway, my question is: I want to encode the FLV file to an AVI file to put on a DVD for a friend to view in their DVD player. They don't have internet capabilities [] so I can't email the link. If I can make a DVD so they can view the AVI files that would be the cats meow!! I tried using the video import wizard to import the FLV file into Flash CS3 but can't seem to figure out what to do.
View 3 RepliesI have a 6 button menu system: when user clicks on a main menu link it will highlight red and light up a light right to the left of the link letting them know they have clicked successfully. After the initial click it will bring down a sub menu with links. However, after they release the mouse button, the little green indicator light goes off. I want that little green light to stay on until they move the mouse outside of the slide panel with the sublinks. how do I keep that light on until user moves mouse outside of the bounding area of the sub-panel with sub links? what code do I need to insert?SECOND:When I go to publish in html, my slide panel which contains the sublinks is chopped off. How do make it were the submenu goes over and on top of my webpage contents right below it instead of increasing the size of my table.
Here is a copy of my code. I will be posting an image in about 30 minutes or less:
// ON CLICK EFFECT - The main menu's sub-menus will slide down once user clicks on a button.// The sub-menu will raise up and disapper once the user's mouse leaves the sub-panel area.
import fl.transitions.Tween;import fl.transitions.easing.Regular;import fl.transitions.easing.Elastic;
stop();
[code].....
The entire .fla animation consists of nothing but two really long movie clips. Which are placed on frames 1 and 2 of the main timeline. Now for reasons that are too deep for me to go into explaination about my boss is telling me that I have to have everything main timeline -no movie clips. I've tried copypasting all of the frames but they all paste wayyy to large on the main timeline and they wind up in different places on the stage.
How can I move all of the frames from my two movie clips onto the main timeline without everything breaking? Better yet - is there any way to just convert a movie clip into an .fla?