Professional :: How To Play Single Stream On Two Objects
Jan 18, 2011
I'm interested in making a stereoscopic player similar to YouTube's 3D Player. The first strategy I tried is having two streams (one for each eye) attached to two video objects, but I noticed that this could lead to problems with them going off sync due to separate buffering issues. So now I'm thinking the way to do it is to encode the two eyes side-by-side into one video, and do some Flash trickery whereby I can take the left side and overlay it with the right side.
I suspect that this is how YouTube does this, because they ask you to upload 3D videos in a side-by-side format in the first place. I don't know how to do that Flash trickery, where I essentially take a video's left-half and overlay it with it's right-half. I tried attaching one stream to two video objects that were offset from each other, but only one of the streams played.
View 6 Replies
Similar Posts:
Jan 19, 2011
I have 3D videos encoded with each eye's content side-by-side on each frame. What I want to do is take the left-half and over-lay it on the right-half. (I'll then change with the colors and the overlaying so that someone with blue-cyan 3D glasses can view the video).
I tried to attach a single NetStream to two video objects and offset them, but that only let the stream play on one object.
View 2 Replies
Nov 30, 2011
Is there some basic AS3 code to have, when the swf loads, a single video play from a collection of videos in an array? And can said code also apply to sound without video?I just found out the tutorial I was using to randomize doesn't work with audio - as it just plays everything at once - you might 'see' one video - but you hear all them. So from what I am reading, I need to us an array (that seems simple enough), but I don't want to play all the clips - I want it to randomly select and play one. Not sure exactly how I set up the video playback area (so the video plays where I want, at the size I want).Also, I have other pages that are just audio - does audio need some sort of player or something for this?
View 6 Replies
Apr 22, 2009
I am working is CS3 and am experiencing problems changing the first frame on a graphic symbol. When I type in a new number it jumps back to the old one. When I try to change play once/loop/single frame setting it jumps back to the previous setting. I am trying to simply modify this on a keyframe in the symbol's layer on the main stage. I've experienced this on multiple occasions, but can't get the workaround this time. I know I can do what I am attempting. In fact, I do it at a couple of spots earlier in this symbol's instance without problems.
View 4 Replies
Jul 30, 2010
How can I add a single control bar to control 2 external FLVs inserted in FLA document so that when scrolled, both FLVs move simultaneously?Is there a better PPT to Video Converter out there than Moyea that I can purchase or even a freeware? Original documents One FLV is a PowerPoint presentation with videos in some slides, converted into FLV using trial version of Moyea PPT to Video ConverterAnother one is an AVI converted into FLV using Super
I saw a similar question posted on Aug 15, 2007 ([URL].. but the "Look Here" link that describes the solution is not available (removed by Adobe for security reasons).
View 19 Replies
Aug 17, 2010
I have 4 live f4vs that I'm using with interactive server 3.5. Thus they are running in dvr. I'm trying to find a way to control all 4 videos so that when you go back on one video all 4 videos go back to the same time. This is very important with camera 4 as it is the only one with sound.I have tried putting all 4 videos in one swf file and I have tried putting each video as its own swf.
View 11 Replies
Sep 4, 2011
I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.In the Flash software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.Too, when I try and open the html with the stream in a browser, nothing appears.
View 5 Replies
May 24, 2010
I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 Replies
Nov 5, 2009
I am trying to stream images (single jpg) from webcams into a swf. I know little about actionscript, and what I have so far is from what I have found in other posts around the web. My first attempt worked, but caused a bad white flash between the image being refreshed. So from others I have learned that this will happen unless I use two movie containers and buffer in between them? Here is the code I have, and it does not work.
[Code]...
I don't get any compiler errors. I think this is as2, but I am not sure
View 0 Replies
Feb 23, 2012
I watched two videos by Jody Bleyle:
1. [URL]
2. [URL]
In Video 1, she shows how to stream a single file. I've done everything to the letter on this video, however, when she uses the videoplayer to reference the livestream.f4m file, there is none. I've actually checked the folder location(apploications/livepkgr/streams/_definst_/livestream and there are files in there (.f4f and .f4x), but no .f4m which is the file she references in the video player.
In Video 2, she shows how to create a multi-bitrate video stream. Using the manifest packager and creating a .f4m and .m3u8 package and placing it in the webroot folder. Here is the contents of my liveevent.f4m file:
[Code]...
View 8 Replies
Nov 5, 2010
I got a bunch of live stream from FMLE, say: "FMLE_channel1", "FMLE_channel2", "FMLE_channel3". And then on the server side, I created several corresponding republished stream called "channel1", "channel2", "channel3".
On periodical basis, we call Stream.get("channel1").play("FMLE_channel1", -1, 10, true) every 10 seconds. Similar things were done on the second channel & third channel.Soon after the above Stream.get("channel1").play() call, I should get the following events in sequence:info :NetStream.Unpublish.Successinfo :NetStream.Publish.Startinfo :NetStream.Play.Resetinfo :NetStream.Play.Start In the above case all are happy. Clients can view channel1, channel2, channel3 well.But then after a while, one of the three channels, in most case it would be channel1, will not be viewable.
With the server trace info, I found that after the Stream.get("channel1").play() call, only the following two events exists:
info :NetStream.Unpublish.Successinfo :NetStream.Publish.Starti.e. I was missing the play.reset and play.start event.I further checked and confirmed that the FMLE was publishing all three channels fine to the server. I was able to view the "FMLE_channel1" from flash clients, but not the republished "channel1". the version is FMS 3.5.0.
View 3 Replies
Nov 17, 2009
I need to merge multiple live audio streams into a single stream so that i can pass this stream as input to VOIP through a softphone.For this i tried the following approach:Created a new stream (str1) on FMS onAppStart and recorded the live streams (sent throgh microphone) in that new stream.
Below is the code :
application.onAppStart = function()
{
[code].....
View 1 Replies
Jan 25, 2011
I have an AS3 swf which users can upload jpg images to my EC2 instances which sit behind and Elastic Load Balancer. The jpg images are converted into bytearray data and sent using URLLoader.load(URLRequest)I make 2 calls when uploading, one to upload a large version, then another to upload a thumbnail version. A PHP script to which the bytearray data is uploaded converts this to a file using file_put_contents($destination,$GLOBALS["HTTP_RAW_POST_DATA"])Is it possible to combine these two requests into a single request which contains both the bytearray data for the large and thumbnail images and 'split' the HTTP_RAW_POST_DATA to create 2 files at the server. This would be better than uploading the bytearray for the large version then using something like ImageMagick to resize the resulting image into a thumbnail which I realise is another option.
View 1 Replies
Jan 23, 2011
I have a layout with narration and a nav bar. When I click a nav button for section 2, the audio from section 1 (set to stream) continues to play over the audio for section 2. This cumulates so if I click buttons for sections 3, 4 and 5, I get five audio files playing on top of each other. Sections are individual movie clips with embedded audio streaming on a Sounds layer in each movie clip.
View 3 Replies
Jan 27, 2012
I am using Flash Media server 4.5 and i read the tutorial if i want to stream the live feed, i may need to use the media live encoder.
but what i found in media encoder is i have to manually setup everything and it only support camera devices. But in my case i have multiple video files keep received from another program and place it on file system (server),my goal is use the Flash Media server to perform a live boardcasting with these video file one by one. That means when client watching a live streaming, they will not notice the server is playing mov1, then mov2, then mov3, then mov4... and so on.
You can imagine i am trying to boardcast a live footage say for 60sec, but the video file will not recorded entirely after 60sec, instead for every 10sec i will save a new video file, so that when client watching the live by HLS [URL]when the time reach to 10sec, a mov1 video file available and FMS should boardcast this video on live123.when the time reach to 20sec, a mov2 video file available and FMS should Immediately follow the mov1 boardcast on live123.and so on...Also can FMS dynamically create a new streaming session (invoke by code), so that when client A uploading some video files to the server, the FMS open a new streaming session only stream cilent A video files?the configuration to boardcasting like screen size, bit rate, etc should be pre-defined on the server. [URL]
View 5 Replies
May 16, 2011
I want to create an interactive learning module that would use a simple drag and drop test. I've already browsed the net for guides and it led me to monkeyflash.com that gave me a very helpful guide. On the guide, there can only be one object be dragged to a target. But then, I wanted my test to have multiple objects (movie clips) be dropped on a single target (also a movie clip) only and stick to it. I'm thinking that I could place my draggable objects on an array, but I really had difficulty on executing this.
On the code below, a drag object can only be placed on one target only (i.e dragIn1 can only be dropped on targetdragIn1 but not on targetdragIn2). Yet, I want all dragAt objects be dragged on all targetAt, dragIn with targetIn, and dragOn with targetOn.
[Code]...
View 2 Replies
Sep 28, 2009
I'm extremely new to Flash and I am making a website and want to have a single button that when pressed pauses or plays a music file. I was able to create one that works by following a tutorial that I found online but the problem is that the button is on the main timeline so as I move away from it, it stops working. I think that it would work better if I was able to make a movie clip out of the button so that it doesn't sit on the main timeline and will keep working no matter where I am on the timeline. All I need is one button that pauses and plays music when pressed. I also want to be able to have a "music on" line of text and "music off" line of text depending on whether the music is playing or not.
View 4 Replies
Dec 8, 2009
I am trying to build a video player in flash that would be able to play multiple flv's as if it was a single video. I come running to you because I don't really know how to go about doing this. I know how to load in an flv and play it, but I want to load in say 3 flv's and play them, the thing I'm stuck on is, do I need to create multiple net streams?
How can I tell the swf to start loading in the next flv when the first one is 90% loaded...? I see you can play an flv, by passing a url to the play method of the net stream object, but how can i get an flv to be on 'stand by' and load in, and add it when the first flv is at 100% finished playing?
View 5 Replies
Jan 22, 2009
I have figured out how to play a sound with AS3, but i cannt figure out how to use multiple sounds. to play a single mp3, i am using this:
Code:
//number that is redefined when the pause button is hit
var pausePoint:Number = 0.00;
//a true or false value that is used to check whether the sound is currently playing
[Code]....
but what I need to do is have 4 different mp3's, each with its own stop & play button, so the user can play any file they want. These are voice over reels, not music, so each needs its own set of buttons.
View 1 Replies
Sep 29, 2009
'm extremely new to Flash and I don't really know how to code yet.. I'm making a website and want to have a single button that when pressed either plays or pauses the music file. I found a tutorial that worked but it has two buttons (one for play and one for stop). You can see the tutorial here:[URL] I'm hoping that someone can tell me how I might be able to change the code so that a single button acts as both play and pause (i.e.; If music is not playing then play, if music is playing then stop).
View 2 Replies
Dec 2, 2009
I have one swf object in my site.
I have to read data from database and after fetching data of video names,
I need to play those video in single swf object one by one, means after completion of first video second video will start.
View 3 Replies
May 6, 2010
I am developing a presentation with data showing up through charts to run in a booth. It generally runs automatically. I want that to be interactive too. If somebody entering the booth want to check the data on clicking on the elements on the presentation.
View 0 Replies
Jan 8, 2010
I'm using AS3, and have one simple layer with 4 keyframes If I import it to another fla file as a library item, it keeps showing me all keyframes, I don't want that I want it to show me the whole animation.
Like, if I have an animation of me swinging a baseball bat, I don't want to see all the keyframes seperately imported into the library, but I want it to be all in one piece, so that when I click play it plays all keyframes.
View 1 Replies
Jan 6, 2009
When the movie loads, the music begins to play. I have a single Music On/Off button that can stop and restart the first track. However, whenever the user stops and then starts the music again, I'd like to alternate the track that plays.
As it stands now, only the the first track will play when the button is clicked (and when the movie loads, of course).
Code in action layer:
ActionScript Code:
var song = 1;
var my_sound:Sound = new Sound();
[Code].....
View 3 Replies
Mar 4, 2009
I'm trying to create an flv player to play a single video from a website. I can't seem to resize the playback window. Altering the width just seems to move the same small window around the screen.
Ideally I'd like it to go full-screen or at least fill the browser window. However, I don't even seem to have basic control at the moment. What am I doing wrong here?
Also, (and maybe this is related), I couldn't import fl.video.* in Flex Builder without placing the component first in my library resource using Flash. Is it possible to bypass this step and import directly in Flex Builder?
[Code]...
View 1 Replies
Nov 17, 2009
Using SSAS on FMS3.5, is there a way to get the stream name of a play event? In my case, I am trying to run additional steps when a stream is played and I need the stream name to do so.
View 3 Replies
Apr 15, 2011
How play more input stream? Is one NetStream enough? If not how to create and use array of NetStream?[code]
View 4 Replies
Jul 14, 2010
I currently have two connections with two separate streams. They both hit the same fms 3.5 server. One connection transfers live audio and video. The other one is used for remote objects. Sometimes when viewing the audio and video stream with a slower internet connection, the stream for the shared objects disconnects. I think it is a bandwidth issue. Is there any way to set the priority of the streams? I think this should allow me to set a higher priority for the shared object connection so it won't disconnect.
View 3 Replies
May 5, 2009
The following code is a combination of samples taken from red5. Basically I am trying to combine a live stream subscriber with a chat box based on shared objects. I'm not a flash developer and have a very limited understanding of what is going on here.
// ** AUTO-UI IMPORT STATEMENTS **
import org.red5.utils.Connector;
import org.red5.samples.simplechat.BasicChat;
[code]....
I don't think that var chat is being initialized anywhere as trace(chat) prints 'undefined'. However var connector and var publish_video seem to collect their instances from the stage.
This sample code included those two and worked fine, but I can't make my additions behave the same way.
I have added an instance of BasicChat to the stage (I'm using Flash CS4) and have spent the past many hours playing with it's various properties, layers and groupings, but to no avail. why my var chat isn't collecting its instance from the stage?
View 1 Replies
Dec 6, 2010
I have a home made RTSP server that streams video to QuickTime clients. Now, I need to support Flash Player clients, because QuickTime needs some configuration to work on Windows, and also there is no implementation of it in Linux distributions. Then I opted for Flash.
BUT: does Flash support RTSP??? If not, where can I find documentation for its streaming protocol so I can build one?
View 3 Replies
