Republish Stream With Lower Quality?
Mar 6, 2012
I was wondering is there a way that I can receive stream on my broadcast server and then republish that stream with lower quality on the same broadcast server. I was reading server side API reference but I couldnt find anything like that.Only thing I found is to use %i in FMLE Stream field and then broadcast same stream with different bitrates, but can I take live stream that is being broadcasted and republish it with lower quality/bitrate on the server side somehow?
View 3 Replies
Similar Posts:
Dec 22, 2011
Say I got a live event called game in "C:FMSHOMEapplicationslivepkgrevents\_definst_game" and push a MBR stream for awhile and see the ".stream" files being created, everything works good.
However whenever I stop the stream, delete the contents and try to republish another stream to this event name never recreates the '.stream' files or stream directories.
1. Delete the files "C:FMSHOMEapplicationslivepkgrevents\_definst_gameMsadsaasa.str eam","C:FMSHOMEapplicationslivepkgrevents\_definst_gameMsadsaasa .stream".
2. Delete all the stream directories - "C:FMSHOMEapplicationslivepkgrstreams\_definst_game1", "C:FMSHOMEapplicationslivepkgrstreams\_definst_game2".
Is this normal behavior or is there a default waiting peroid before reusing an event name? Should I only publish to a liveevent name once?
View 2 Replies
Feb 10, 2006
I have a loaded movieClip on _level1. In that movieClip on the main timeline I have a for loop that enables 20 movieClips on _level0. I want to lower the quality of the 20 movieClips but everything on _level0 is affected with this.
[Code]...
View 7 Replies
Dec 22, 2006
I have used the script below to load the mp3 file, but I couldn't do what I used to when I imported the mp3file to stage and I did it there. Is there a way to place fadeout at the end of the music and make the sound lower and lower, is there a way to apply something like that via Action Script?
mySound=new Sound();
mySound.loadSound("sommeu.mp3",true);
mySound.start(0,0);
View 2 Replies
Sep 9, 2010
I was wondering if I were to create a NetStream object and publish it passing in "record" (allowing the end user to record a video via webcam which is then stored on the FMS), how would I specify the bitrate and frame rates etc of the video being recorded? Is this something I need to configure flash media server to do or can I do this through action script?
View 1 Replies
Jun 12, 2009
I use wowza server and need to build a flash client to publish different encoding qualities streams. Does it has any open source or paid with source code flash client products?
View 3 Replies
Apr 28, 2011
goal is to record a stream from a webcam with the best possible quality regardless the bandwith of the user.(it doesn't have to be live or broadcast, just stored on the server)
is it best to record from server side with asc script or directly from the flash player ?what are the parameters on the server that i can play with in order to cache locally the stream if the bandwith is not high enough ?
View 5 Replies
May 6, 2010
How to get a high quality sound in Stream Mode in the Timeline not in Event Mod? In Stream Mod the sound played in the timeline is HQ but after .swf export it gets in really bad quality
View 5 Replies
Jul 30, 2010
So far , I only found tutorials on control these attributes while publishing the stream
View 15 Replies
Apr 3, 2012
we are streaming 24/7 live from a number of FMLE's to FMS Interactive server to a livepkgr cloned app., and to our clients we stream both to Flash via rtmp and to iOS via HLS.Since we want to introduce another server (to be able to serve more clients), the question is - hot to republish from one to another server so that both servers can stream rtmp and hls to clients?We are already using the backup url in FMLE to stream to a backup server - this we do not want to change since the backup server is just that - backup, if the main server fails.
View 2 Replies
May 6, 2009
I have buffer of video and want to pass it to server and then republish it to the client and display that as live video.
View 1 Replies
Sep 30, 2011
When publishing a project from Camtasia Studio 7, the params list includes a setting for quality. But instead of the usual "high" value, it sets it to "best". I Google'd and searched these forums but had no luck finding any definitive explanation if these two settings are equivalent. Can anybody enlighten? This topic also spurred another question, does the quality default to the highest value if the parameter value is invalid?
View 2 Replies
Aug 28, 2010
close another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 Replies
Oct 8, 2010
Only just getting started on this whole domain of learning, so go easy!If I set up a P2P video/audio chat (similar to the sample VideoPhone thing on the Cirrus site), can I get the stream from both parties to send to a server at the same time so that I can record it? If so, would I have to use a FMS to stream it to and perform the recording (and if so which version could I get away with)? Are there any (preferably free, or just tutorialised) solutions for the recording side of things?
Currently it seems like the only option for doing the P2P thing is to use Stratus/Cirrus unless I use FMS4 Enterprise.
how effective this kind of situation can be, in terms of quality of the stream and recording? Does any of this make sense?
View 1 Replies
Jul 26, 2010
I've had FMS running on my local machine for a while and have had a little experience writing FMS apps, but I've just tried recording audio for the first time using the standard vod application and I keep getting a "Write access denied for stream" error. My AS3 code is copied and pasted for various examples and am confident that it works.
I'm running Windows XP service pack 3 & FMIS 3.5.
I've had a look at the vod/media directory and under windows->properties the read-only attribute is ticked. Every time I un-tick this it reverts back to being ticked. I've googled this and MS say that most programs ignore the read-only attribute and that it only really applied to files. I've also tried the MS fix for setting the read-only attribute via cmd and still no joy (doesn't fix read-only attribute or FMS recording the audio after setting via cmd).
I've also tried our dev server install of FMS (running under linux) and am getting the same results.
Here's my AS3 code...
private function initApp(event:Event):void
{
removeEventListener(Event.ADDED_TO_STAGE,initApp);
[Code].....
View 1 Replies
May 9, 2011
i test the fms 4 update 1 rtmfp streams multicast after 10 minutes i get this message RTMFP Multicast stream has exceeded max duration allowed; closing stream. but i do not use IP multicast
[Code]...
View 3 Replies
Mar 9, 2010
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
View 3 Replies
May 24, 2010
I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 Replies
Aug 27, 2010
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
View 2 Replies
Jul 21, 2009
I am having trouble getting audio stream meta data from an Akamai FMS stream. Everything is undefined and I'm not sure why. I am hoping maybe someone will notice something that I am overlooking. The stream is connecting and playing without a problem I just can't seem to figure out why all the meta data is undefined.
[Code]...
View 6 Replies
Sep 15, 2010
I would like to RePublish Live Stream to a CDN (Level3). this CDN must use FCpublish on Client Side (like FME).
my Publisher send stream on FMS3.5 (Server1) and this stream must go to Serveur2 (CDN) with FCPulish.
On my local serveur1, i add some code to do that but whitout succes...
i can RePublish when i simulate the second Server(2) on my LocalHost BUT withOut the FCPublish Method.. (i use the sample from Adobe Flash Media Server "Publishing server 2 server")
How can i change this sample to use the FCPublish method to republish the stream to Server2 ?
with my tests, i think that my problem is how to receive the "onFCPublish = netstream.publish.start" from the server2 to my server1
please, do you have a great and simple sample (like this before) to reStream by FCPublish Method ?
I know how to make it in AS3 on my Flex Client Application but not in the Action Script on the main.asc
View 1 Replies
Jan 23, 2011
I have a layout with narration and a nav bar. When I click a nav button for section 2, the audio from section 1 (set to stream) continues to play over the audio for section 2. This cumulates so if I click buttons for sections 3, 4 and 5, I get five audio files playing on top of each other. Sections are individual movie clips with embedded audio streaming on a Sounds layer in each movie clip.
View 3 Replies
Dec 12, 2011
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
View 2 Replies
Mar 8, 2011
I am very new to action script. I want to stop the stream from publishing then later on i want to publish the same stream again. My problem is that I have 3 levels of stream processing (Ingress-Rename ProxyLimelight-AuthProxy-Live) before it goes live. User wants to stop stream from publishing and then publish the same stream when he wants in each level. User does not want to start the stream from the begining, he wants to restart the stream on the same where he stopped.
View 0 Replies
Jan 15, 2010
I have 30 values coming from an xml file, and I need to programatically find out which of them is the lowest, then I need also to find out exactly where it is located, so I can get the value that is located next. What I mean is:
Let's suppose that on the following xml, Cat2 is the lowest value, I need not only to print Cat2, but also Dog1. So, I will need to find out how to get Dog1 knowing that Cat2 is the lowest value.
<xml>
<1>
<a>
Dog
[Code].....
View 2 Replies
Jul 19, 2011
I'm working with Adobe Flash CS4. designing website it's a tour guide so it has a lots of pictures in it that's making the file too large so when i test it takes awful long time or doesn't shows me anything at all.
View 1 Replies
Dec 11, 2011
Can I re-stream a stream from wowza to fms 4.5?I have a wowza stream with the url similiar to URL... Is it possible to restream this to fms 4.5?
View 3 Replies
Jan 24, 2011
I have a narration and a nav bar. When I click the button for Section 2, the audio for Section 1 continues to play on top of the audio for Section 2.
View 1 Replies
Aug 24, 2010
I normally work with print design but am designing some flash banners for a client. Just have some questions about file size.My current banner is 125kb but they want it under 25kb. Is that practical for a flash banner?Also, I have done tests with import options and it looks like if I import my artwork as an .ai file and convert to symbol then it gives a lower file size than importing as a png or jpg.How can I make my file size lower? I know it's hard to answer without seeing the file but is there an option similar to 'save for web' in photoshop where I can adjust the quality to reduce file size?
View 1 Replies
Jul 20, 2009
I'm try to lower the contrast of a movieClip, but it seems to have no effect. contrast, saturation, brightness do nothing.
My Code:
var bobRun:MovieClip = new bobRunning(); addChild(bobRun); bobRun.scaleX = .45; bobRun.scaleY = .45; bobRun.x = 350; bobRun.y = 30; bobRun.contrast = -100;bobRun.saturation = -100;bobRun.brightness = -100;
View 3 Replies
