I make some animation from flash cs 5 it is some complected when the time i working with it i tested ..all was ok..but after a moment on working ..the swf output dont show me my text inside it ..only images shown..what is the reason .... im waiting...i make that for my university presentation... im new to flash
[Code]....
I'm making an interactive book and I would like to make my "Text"-layer invisible when I start the "Turn Page"-animation. It's either that, or I'm gonna have to put a code for EVERY 23 MoveClips with the Texts in them, since I'm using the same "Turn Page"-button.
View 2 RepliesI have two motion-tween animated movie clips used as "buttons" which I would like to link to various html pages on my site. Using invisible buttons works, but I can no longer see the animation. If I put it under the movie clip layer, it no longer responds. Is normal, or should I place the invisible button within the editable movie clip?
View 4 RepliesIs it possible to create a invisible mc with in 2 other invisible mc's and if so would there be any complications. Im trying to do something similar and it gets to the second layer but then doesnt want to load the third inv-mc. Like loading an external swf to a container mc then in that same mc have another external load and then another.
View 3 RepliesI am embarrassed to admit that I am still working in Flash 6. But I am. I do not have the ability to upgrade at this point. I have created a contact form and all is working, but the input text is invisible to the end user. Oddly, anything that is typed is sent ok, they just can't see anything they are typing!
View 10 RepliesI'm running my head against a wall here and I'm not sure how to tackle this problem. Background I'm making some sort of movie player with subtitles overlayed on it. I'm using the root timeline for my movie timeline because this greatly increases development speed. The subtitles are created with the texttool, and I make them dynamic textboxes because I need to reference them in AS3. I cannot wrap them into a movieclip because they need to be in sync with the root timeline
The user should be able to enable or disable (effectively showing or hiding) the subtitles. The way I did this is by adding an event listener that listens to Event.Enter_Frame on the root timeline and a global boolean to indicate whether subs should be shown. In the enter frame event listener I search for the textfield by root.getChildByName (the name is the same each time) and show or hide the textfield accordingly.
[Code]...
I have a component called "liveTEXT" that I purchased that allows for the client to edit certain text sections to be edited by them on the front end of the site. Right there in the site. The problem I am having is that if I have this liveTEXT on say frame 100, and I go to frame 101, the text is still their overlayed over the content of that page. The text is called with this actionscript in frame 1:
[Code]....
i am using one input text box and one button. In the beginning the button should be invisible. Once i started to type text in input text box, the button should be visible.I used following script. But it's not working.[code]
View 2 RepliesI use tinychat and tinypic. Now when I go on either one the text is invisible. I cant see any text, its there cause I can copy and paste it. I did not have this problem until I updated my flash.
View 3 RepliesI register my fonts once they are loaded. In my head I should be able to use them once they are. But I wasn't so I tweaked my code, here it is but it still makes the text invisible. As soon as I do embedFonts = false, it starts working again.
trace(Font.enumerateFonts()); // Returns an array and does show my Fonts embedded.
var format:TextFormat = new TextFormat();
var fontClass:Class = _model.getFont("HappyHell"); // Does return the Class[code]...
i used this code to change the text format but the text simply doesn't show up!
_global.formatCima = new TextFormat();
formatCima.color = 0xF0FFFF;
formatCima.size =24;
formatCima.font = "Verdana";
_root.txm1.txfd1.tx1in.txto.setNewTextFormat(forma tCima);
I have a movie clip which has a dynamic mask applied to it to provide a scroll effect.
The mask is generated with the 'create blank movieclip' method.
So the mask is a movie clip over a movie clip.
I hunted for invisible text last night and found this link [URL]
which implies it's to do with the mask being on a layer, but from what I can gather from reading the AS, it's not it's on a new blank movie clip.
Also many other links I found all imply it's an issue with dynamic text and the font needs to be embeded, but the underlying text is not dynamic, it's static normal text which has been used in a movieclip to create animated rollover/out effects.
So why is the text missing when the content is scrolled into view?
If you hover over where the text is supose to be, the animation plays and the text becomes visible?
Also the arrow graphic next to the text which forms part of the animation does display; it's just the text portion which is invisible?
I have this issue where I'm incapable of viewing any text in the chatlog box, the text entry line, the userlist, or the pop-up Flashplayer option menus when using [URL] online chat application. The pop-up Flashplayer option menus do have outlines for buttons as well as having icons in the bottom-row of buttons yet lack text completely.
***Re-install as officially directed by the site did *not* work even after several iterations. This is becoming a nuisance.
This began after the installation of the latest version of Flash Player about two weeks ago (I've been busy )
operating system: 32-bit
web browser/version: Firefox 3.6.3
Flash Player version: 10.1
I have inherited a huge application (several thousand lines of code spanning roughly 40 files) to which I must add some functionalities. Now I haven't even started on modifying the code yet because of a problem when loading the Flash file. The Flash files represent a whole website "creator" or "manager" depending on how you see it. It allows end-users to add buttons, images, text fields, etc. inside which other buttons/images/texts can be added. Basically, it's some kind of WYSIWYG editor. I did not create this but I agreed to work on it for some time if I can get it working.
There is a main file, aptly named index.swf, which loads other files (the website file, or the text editor file, etc.) according to what the user is trying to do. If a user is simply viewing the website, then it displays the website. If a user is modifying the website (after authentication), it displays the website AND a management interface, which allows the user to add, modify or remove controls on the site.My problem is that all TextFields display their content (the text) properly when the website is displayed but they display nothing when the management interface is displayed. In other words, a user viewing the website will see all texts in it; a user modifying it will not.
The way this works is that the main SWF (index.swf) creates an empty movieclip for the website and loads the website (another SWF) inside it. Then it creates other movie clips and loads other SWFs inside them for the management interface.The TextFields inside the website SWF contain the appropriate text and have an appropriate font set up (I am able to display it using Alert.show) but their textHeight and textWidth properties are 0, which to me is not normal.
I bought some flash templates and have a big problem. When using some flash movie with dynamic text when I run it standalone - its working 100%. If loaded into main movie then static text,graphic, actionscript is working fine but all dynamic text is not visible. Something in main movie is making dynamic text invisible. Please guys some help will be great - I spend already 3 months trying to figure out problem but with no luck.
clientarea.fla is the main movie client area, praguese are XML config files for main movie -rename from txt to xml movieloader - is loader which have to be used to load swf to main movie
How to make a DYNAMIC TEXT invinsible at the begining and toggle the view accordingly.The Important thing is - I need the text to be invinsible at the begining. The main thing behind my need is WHEN the user GO FORWARD and BACKWARD in the main timeline the visibility of the text box should be unchanged unless the user decide to change it's visibility by clicking "chk_tbtn1" button.
In the code below every time the user go backward in timeline, it makes the txt box invinsible.
_root.my_Dyn_Txt1._visible = false
this.chk_tbtn1.onRelease = function() {
_root.my_Dyn_Txt1._visible = !_root.my_Dyn_Txt1._visible;
};
My website is coming along nicely, just starting to add some content and to make it nice and easy for my client to edit their own content i thought I'd make all the text external.
Works fine in the external swf, when I publish that file alone the text shows up perfectly. But when I load this same swf into the parent movieclip (the main website) the text is invisible. I've put in a trace function and the parent MC can output what is in the dynamic box, but it's invisible in the player.
Basically I need a dynamic text field to be invisible on rollover and when you move your mouse off it, it becomes visible again. I have it working (see code below) however when the cursor is over the field and the cursor moves slightly over the area (still keeping it invisible) the cursor flickers between the normal arrow pointer and the text cursor. Is there a way I can stop this? Is there a better way to do this rollover that would prevent it?
[Code]...
I'm sure this question has been discussed before? I'm wondering how I can make this particular scrollbar invisible when the text inside is short and visible when the text is longer? What would be the AS for this? I'll attach my file to this post!!
View 2 Replieswhen i set embedFonts to true, the textfield cant be seen on stage. but when i set it to false, it appears on stage. whats going on?
Code:
var newTextField:TextField = new TextField();
newTextField.text = "Hello Ayumilove";
newTextField.alpha = 0.5;
newTextField.embedFonts = true;
addChild(newTextField);
how I can make this particular scrollbar invisible when the text inside is short and visible when the text is longer?
View 3 RepliesI am a Flash novice who has worked through a couple of the standard introductory books on Flash in Actionscript 3 and some of the online tutorials. However I cannot work out how to do the following: A button A (I know how to design buttons including invisible ones) is on the stage. A user clicks on this button which then causes a text to appear at another location of the stage. This text includes an invisible button B. The text tells the user to click on it with the result that the text, including the invisible button B, disappears but if the user reclicks button A then the text with button B should appear again.
View 3 RepliesI have a simple text animation(revolving text) it works fine althought i would like ti to pause for 5 seconds at completion in the second to last keyframe i added the following:
stop();
pauseAnim,=setInterval(this,"nextframe",5000);
i added a final keyframe and added this to it:
clearInterval(pauseAnim);
play();
it does not re-start as expected instead it stops and thats it,,,,, i need it to restart after 5 seconds?
ok i have a movie clip with a dynamic text field being animated... i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
I created a motion preset of a 3D text animation that made the text swing back and forth like a gate with the hinge on the far left side. However, when I apply the motion preset to other text, the text moves to a new location and the text swings closer to the center than the far left side. Moving the text only creates a travel path that further complicates matters.
what am I doing wrong with the motion preset? How can I save something into a preset and apply it to other things and have the animation work the way it was designed?
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
I need to create animations to serve two audiences: 1) human participants in an experiment, and 2) a program I'm writing that will "watch" the same scenes. For the first audience, exporting to SWF works just fine, but for the second "audience", the Export Motion XML option isn't working as expected.
As a test, I created an ActionScript3 FLA file in Flash CS4 with a stationary red circle in one layer and a green circle in a second layer that moves across 10 frames. When I export each of these layers, the files differ only in the "x", "y", and "symbolName" attributes.
How can I generate a single text-formatted file that shows the positions of each symbol in each frame?
I'm using TweenMax to animate a flash card flipping. The problem I'm having is that the text on the cards looks really bad after being animated.
View 3 RepliesI am trying to create several texts with animation on mouseover (basically animated menu).
Steps followed: created text, converted to movie clip (m_text), put a stop() in first frame added animation movie clip in second frame, which is played on mouseover (added onrollover function AS2.0)
It works fine. Now I tried to create multiple instances of this m_text, tried to change the text. But it changes in all instances.
If I try to create multiple instances of text only, then I will have to repeat the procedure of adding frames, adding animation clip, add AS for mouseover etc for each of them.
All I am trying to do is create one text with animation on mouseover, copy paste it several times and change only the text for each of them.
i am really stuck with a quite tricky problem i have with my e-learning software i am creating.The on screen text is written onto the screen one character (animated) at a time using a peice of code and then each scene i MAY want a prompt box that appears on the stage AFTER the text has completed writing.I am currently using this code to write my text onto the screen which works brilliant,
Code: Select allvar textToAnimate:String;
function startToAnimate()
{
[code]....
