I want to display an image, and it should be transformed like this:If for example, my original image is 200x300 pixels in size, I want it to have a width of 150, and then scale the height accordingly. Then I want to crop the image, so that the result has a dimension of 150x150 pixels.
View 2 RepliesWhat do I have to write to keep the movieclip not to change dimensions if the user starts playing with the dimensions of his screen ? I remember it was a line of as3 written at the beginning.
View 3 RepliesI want to know how can i make something like if any one scale browser my site will scale in aspect ratio without cropping
something like jimcarrey website [URL]
I'm using a square shaped container (content_holder) to load movie clips which have a lot of animations spilling off the stage.In my container I have a mask which fixes this so all you see is the content within the square.PROBLEM: The width and height of content_holder is not accurate, as it also counts the overflowing animation which is MASKED. As a result this messes with my ability to center and manipulate the clip because its width/height is constantly changing.
QUESTION: Is there a simple way to load a movieclip into a container and LOCK its dimensions to a specific size? So the width is always fixed to the container's OR prevent the masked content from adding to the clip's width & height values?
I'm using a square shaped container (content_holder) to load movie clips which have a lot of animations spilling off the stage.
In my container I have a mask which fixes this so all you see is the content within the square.
PROBLEM: The width and height of content_holder is not accurate, as it also counts the overflowing animation which is MASKED. As a result this messes with my ability to center and manipulate the clip because its width/height is constantly changing.
QUESTION: Is there a simple way to load a movieclip into a container and LOCK its dimensions to a specific size? So the width is always fixed to the container's OR prevent the masked content from adding to the clip's width & height values?
I'm making window component on Flash Professional CS4 and now I have 1 problem. At the top of window is dynamic textfield for title. When I scale window text is also scaling. So is there any way to make textfield fixed in same position and same size? 9-slice scaling is enabled.
View 2 RepliesIs it possible to have a single jpg (1024x768) scale up & down with the browser window (no matter the aspect ratio, stretched to 100% browser width/height), while keeping the foreground content (most likely added via loadMovie) in a fixed scale and centered on the screen? An example can be seen on the Second Story home page.
View 9 RepliesI have created a image cropping tool in flex using core copyPixel method.croppedBitmapData.copyPixels(croppedBitmapData, clipCan, new Point(0, 0));I have to crope area of dementions 20*20 and show this cropped area in an image of demention 250*350. Every thing going well.My problem is image distortion.Even i am using this method for smoothing image contents on complete.
private function smoothImage(event:Event):void
{
var bitmap: Bitmap = ((event.target as Image).content as Bitmap);
[code]....
Using DRAW I want just a part of the original image. I am using the "Rectangle" bit of the paramaters, but I can't get the start of the crop away from the top left corner.
Here's my code :
ActionScript Code:
import flash.display.Bitmap;
import flash.display.BitmapData;
import flash.text.TextField;
[Code].....
I made an xml loaded dynamic image gallery and I cannot figure out how to crop the image should it be too big. Masking appears to work only with a movieclip created outside of actionscript (which cannot be created dynamically).
View 2 Repliesi have downloaded the rogue object handle 2.008 i need to know how to Use it to cropp and rotate the Image.
View 1 Repliesi have a flash site im working on, with an image gallery. the way the site is designed, when you enter into a gallery, while it's loading the images (lets say 5-10 images), it draws 5-10 gray boxes in the exact spots the images will load into.
the trick is i need to know in advance how big the gray boxes should be (width/height) before the image is fully downloaded.
i found this site: [URL]
but the way he wrote this, as soon as the class determines the images dimensions, it cancels the download.
i'd rather have a fully complete image class that downloads images, dispatches events with the image dimensions as SOON as theyre detected, and fully downloads the images as well.
How can i do image size fixed on this carousel help with as 2.0 ? [URL]
View 5 RepliesI need to do this conversion so that I can determin the drag drop colour a puck lands on.
possibly involving:
ImageSnapshot
BitmapData
This would be in Flex 4
This is the souce code for loading and resizing the images from an xml page. The rectangle is autimatically resizing as per the size of the image. But the problem is, in 800 x 600 resolution with small images the rectagle goes down 'coz it resizing happening in aspect ratio (width and height is proportionally changed). I want to change the height and width only downward direction. Top left corner should be fixed. How to alter this code for that.
Code:
MovieClip.prototype.resizeMe = function(w, h, id) {
var speed = 3;
[code].....
I use flashmo carousel 057.But all loaded pictures orginal size.How to fixed(100x75) or any image size view ? http:[url].....
Code:
// Code Credit: Lee Brimelow
// Tutorial Reference URL: www.gotoandlearn.com
// Modified by www.flashmo.com[code].....
I'm making an application that gets images from a web site and displays them on a screen for the user.How do I call getSize() on that data? I've been told I can use XML functionality in AS3 to achieve this as well, any idea how someone might accomplish the task?
View 1 RepliesI want to load an external jpg,Is it possible to get the dimensions of the file loaded after? It seems straight forward enough and easy to do - but I don't ever remember seeing such a functionality in Flash before.
View 4 RepliesI need to get the width and height of the image before it finishes loading with a moviecliploader instance. This is for placement of another clip, which will always load before the image. Is there any way of doing this??? onLoadStart does not give dimensions of the image.
how do I access a button within the emptymcholder, and place it at a specific position?? Is this possible??
I tried doing emptymcholder.buttonname._x, but it does not work.
I'm using the following code to load images into a gallery through xml. The native resolution of the files is relatively high (though fits well on my 1920 x 1200 pixel display). Since I can't determine the resolution of other users' displays I would like to be able to resize the images loaded so that they fit proportionally on any screen.
[Code]...
I am trying to get the image dimensions to center in the dynamic sprite object but I am getting 0 in the height and widh property. get the image dimensions? I tried by using various properties of image control but I am getting the dimensions. Please see code below and the values in the inline comments
[Code]....
I have been searching in forums and I couldn't find an answer so I thought maybe I should ask.
I wrote a script that allows user to select a local file, which gets resized if it exceeds the width/height limits I specified, and finally this file gets uploaded to the server.
In documentation it writes the same max sizes for BitmapData and Loader:
Quote:
In AIR 1.5 and Flash Player 10, the maximum size for a loaded image is 8,191 pixels in width or height, and the total number of pixels cannot exceed 16,777,215 pixels. (So, if a loaded image is 8,191 pixels wide, it can only be 2,048 pixels high.) In Flash Player 9 and earlier and AIR 1.1 and earlier, the limitation is 2,880 pixels in height and 2,880 pixels in width.
So what I need is to check the file size (width and height) before I attempt to load the bytes of the file into a loader. I'm limited to the ByteArray that I get by the load of the file via a FileReference instance.
Has anybody seen a source where you can get that data out of a ByteArray prior to loading it into a DisplayObject?
how to get the width and height properties of an image being dynamically imported into flash? (I need to know this BEFORE the whole image loads)
View 3 RepliesI'm loading an image into a movie clip dynamically, but I need to know its width. I can get it during the call back function for the complete event but how to I access this variable later on? If I trace its host mc's width outside of that function it returns '0' for the width.
View 10 RepliesI'm loading images from an XML file and I know what the image name is, however this is in a string variable. How can I get the dimensions of the image from this?
View 1 RepliesHow do I set the width and height of a loaded image in Flash? Setting the dimensions immediately after requesting it does not work. The width and height remain zero.[code]If I wait a short moment and then set the dimensions, it will work.I tried listening for the Event.INIT event and Event.COMPLETE events before resizing as suggested by some tutorials. Neither of the events were triggered.[code]
View 3 RepliesI have a site that allows a user to upload an image, modify the image, and then save the image to their computer. This works fine, or at least it suits me so far. This is done by uploading an image to an empty movie clip, failcont_mc, and then exporting it as a jpeg once the user is done editing the image. The empty movie clip seems to be dimensionless, which isn't a problem.
The problem lies when the user uploads a photo that has very high dimensions. I'd like to be able to upload the image, then scale it down and keep it's aspect ratio if it's too large. I only want to be able to do this if the image is too large. For example, load an image sized at 800x600 and scale it down to fit into an area that is 500x400 while keeping it's proportions in tact.
Here is an idea of what I want in steps:
1. Upload the image into empty movieclip
2. Check dimensions of the occupied movieclip (previously empty)
3. if the dimensions are above 500x400
4. then scale the movieclip down while keeping proportions in tact
5. display movieclip
The code is made up of snippets from here and there on the internet, so don't be surprised if you see something that looks familiar. On a side note, I'd like to give credit to those who have allowed their code to be used openly. All of the code works fine, I would just like to add steps 2, 3, and 4.
Imageholder: failcont_mc
In the code, I have a big white space to give an idea of where I'd like to place the code. I assume the code is executed as it is read by the flashplayer. What I have tried so far was grabbing the width and height of the "occupied" movieclip and setting them as variables. I used these variables to determine if the width or height was the larger number. Then I used the variables to make a proportion to make sure the end dimensions of the movieclip stayed within the area.
Code:
//Allow this domain
System.security.allowDomain("http://localhost/");
import flash.net.FileReference;
// The listener object listens for FileReference events.
var listener:Object = new Object();
[Code] .....
I am loading images into a movieClip via XML file. I was wondering if there is a way to find out the height and width of the image I am loading. I tried grabbing the movieClip's dimensions but it's only the original size of the clip before i loaded the image.
View 1 RepliesI'm using FileReference to load up JPG or PNG images and I'd like to retrieve the image size dimensions somehow. Is there a way to do this?
Code:
//initialize the fileReference
fileReference = new FileReference();
//add some listeners
fileReference.addEventListener(Event.SELECT, onSelectFile);
fileReference.addEventListener(Event.COMPLETE, onCompleteFile);
[Code] .....
I'm loading images from an XML file and I know what the image name is, however this is in a string variable. How can I get the dimensions of the image from this?
View 1 Replies