Actionscript 3 :: AddEventListener In SWF Nesting
Apr 29, 2011
I currently have a .swf file that is nested into another .swf file. In the parent SWF file I use a UILoader to load the other .swf file. uiLoader.source = "data/child.swf";- In the child SWF file I have stage.addEventListener(KeyboardEvent.KEY_DOWN,keyPressedDown); and when I run it on it's own, it works perfectly; but when I run child.swf through parent.swf stage.addEvent... give me a null reference exception. Is the stage part of what is causing the issue?, and if so, is there a way to fix this?
View 2 Replies
Similar Posts:
Jul 17, 2010
I'm trying to access a particular movie clip that's buried about 4 layers deep inside other movie clips. I have a an on release event handler attached to it but it doesn't respond. I double-checked my syntax and there are no errors. Is there a nesting limit when it comes to mc addressing?
View 7 Replies
Jul 16, 2009
I'm trying to nest a MC within a MC and adding a bitmap into the nested MC and it's giving me an error message.[code]
View 3 Replies
Aug 26, 2010
how to do this with a nested MC in a for loop? I've tried
"tab_MC"+i+"tabBttn_MC"
"tab_MC"+i+".tabBttn_MC"
tab_MC+i+.tabBttn_MC
tab_MC+i+tabBttn_MC
None of the seem to work.
var tabButtonsArray:Array = new Array("tab_mc1", "tab_mc2", "tab_mc3", "tab_mc4", "tab_mc5");
function bringToFront(event:MouseEvent):void {
[Code].....
View 4 Replies
May 30, 2007
I have created a movie which uses an XML to retrieve data.. it works fine on it's own,but when I load it inside another movie, it cannot find the XML of the loaded swf. I went So, does that mean I have to use the full path of the XML in the nested swf?
View 2 Replies
Dec 8, 2009
I want to create dynamic movieclips inside another dymanic movieclips.Here's what I came up with:
Code:
function prepararConteudos():void
{
for (var j:uint = 1; j<=numMenuWeb; j++)
[code]....
I'm adding a child to "fundoConteudo_mc" with the instance "mc_contentor", which works fine. But when I try to add a child to "mc_contentor" i keep getting the "A term is undefined and has no properties" error.
View 2 Replies
Feb 11, 2007
There was a thread, not sure if it was in AS or Experiments or MX, but is was this "McSlider" .as driven thing. The link below is my adaptation of it. I am even sure some one brought up nesting mcs with button actions. I just can't find the thread.(i.e the boy is an mc inside the slider with a rollOver and RollOut, but they do not work.
View 2 Replies
Jun 12, 2011
I am trying to create some flash banner (looping animation). I have 1 stage timeline (100 frames) and several movieclips. I need to play 1 movieclip from frame 1 to frame 50. How can I do this?
It plays again and again. If I add AS stop(); in the frame 50 of this mc (inside mc timeline), then this mc plays just once. When all movie is looping from the frame 1, this mc does not play.
View 8 Replies
Jun 29, 2010
I seem to be having trouble when I am nesting 3 arrays,
var A_one:Array= [];
var A_two:Array= [];
var A_three:Array= [];
I then create a number of points and put them into array three, I do that with different groups of those groups of point and load a bunch of array threes into array twos and then I have 5 array twos and put them into array one, when I try to load a specific array three I create a variable array and do as such:
current_A_three=A_one[2[tracker.trackNum]];
tracker.tracknum is a number based on which btn I am pressing
But when I trace the value of the current_A_three array I get the error
ReferenceError: Error #1069: Property 1 not found on Number and there is no default value.
at Function/<anonymous>()
That is when I click btn one, if I clicked btn two I would get property 2, I tried playing aroudn with it, I did trace A_one[2] and did get the proper multiple arrays, but I need a spesific one.
View 1 Replies
Nov 15, 2003
Just created a preloader using one of the tuts here. Worked great in my main timeline however, upon nesting it in a movie clip... it seems to be broken. I put the same preloader in the 1st 2 frames of my movie clip which is located in the first frame of my main timeline.
Here's the code I'm using:
bytes_loaded = Math.round(this.getBytesLoaded());
bytes_total = Math.round(this.getBytesTotal());
getPercent = bytes_loaded/bytes_total;
this.loadText = Math.round(getPercent*100)+"%";
if (bytes_loaded == bytes_total) {
this.gotoAndPlay(3);
}
Why wont it work nested in a MC??
View 14 Replies
Nov 13, 2006
is there a cleaner way to attach movie clips than this type of syntax?
_root.attachMovie ("Frame", "frame", 60);
frame._x = 375;
frame._y = 375;
[code].....
View 2 Replies
Nov 6, 2010
I have a slideshow (graphicsshow_mc) within a navigation menu (graphicsmenu_mc) - a movieclip nested in a movieclip. There are previous / next buttons inside the slideshow that work correctly.
Example: prev_btn02.addEventListener(MouseEvent.CLICK, navBack02);function navBack02(event:MouseEvent):void { gotoAndStop("deinonychus")}
The navigation menu acts like chapters for a DVD, and I want one button to always go to the beginning. I copied the other code, but need it modified to reflect that it appears in the parent.
[Code]...
View 7 Replies
Feb 2, 2011
First off I am creating an online gallery. It is made up from several thumbnail images of the art pieces which, when clicked, show the image in a larger format. I achieved this by duplicating the frame 12 times (how many images there are on the page) and linking each thumbnail to its corresponding image which runs through the frames 1-12.I had this working perfectly, except for my thumbnail mouseover animation which animated fine when the mouse was in the hit area, but once outside the animation just snapped back. This was done by simply nesting a movie clip symbol into the Over state of the button (which didnt require any code).
However, once I searched the internet for ways to allow the animation to go back to its non-active state with a rewind animation once the mouse is off the hit area, I hit a new problem entirely. Of course, this effect required some basic coding, and wasn't relying on the button's Over state to activate the animation. This meant that when I tried to nest the new animation into the button the hit area of the animation was over the hit area of the button, disabling its linking capability. I've tried everything I can think of, but I cannot get the animation to be triggered when the user hovers over the button as well as the button being able to link to its frame.
View 23 Replies
Jul 9, 2011
I having trouble nesting classes then calling them on the main stage.I have one AS file that contains all the functionality to create a simple button with a text field that can be customized from the FLA file. I want to use this AS file to create another AS file for a form.I have called the simple button from the AS file into my other AS using import RoundRectButton.
View 2 Replies
Aug 18, 2007
Let's suppose we have this tiny piece of code:
Code:
var parentObj = new Object();
parentObj.childObj = new Object();
How do i reference the parentObj from within the childObj? Writing
Code:
parentObj.childObj._parent
doesn't work.
View 1 Replies
Feb 18, 2008
The swfs I want to load are picflash1,2,3... etc .swf in a folder "movies". I am not using an absolute path as I am just testing things out, before they go up.I have followed the 'Infinite Menu' tutorial by Pom and have no problem with the code for the movement of the menu as a mc. BUT I cannot get the buttons to work. The only script I can use to get a button to load a mc at all is:
on (release) {
_root.loadMovie("movies/picflash1.swf");
}
This doesn't of course load the mc into a new level in the same mc or at _x, 150 and _y, 150. Which is what I want! So I am using this:
on (release) {
_root.createEmptyMovieClip("area",1);
loadMovie("movies/Picflash1.swf", "area");
setProperty("area", _x, 150);
[code]....
...and now it doesn't work! The button does work if it is not nested in the mc I need for the script to be used for the infinite menu.
View 1 Replies
Apr 15, 2009
I have multiple movie clips nesting inside each other as I need them to perform different functions. On my main timeline I have a mc called "menu_mc", inside of that I have "menubg_mc" and inside of that I have "drop_mc". I have some code on the "menu_mc" timeline, a tween class to make the menu slide out from the left of the stage. Inside the "drop_mc" timeline I have some tween class code which reveals the drop down menu. Now the slide out menu works fine but because the "drop_mc" is 2 levels deep, it won't play the drop down tween. I know that I need to target this movie clip but my question to you is.. Where do I place the code for "drop_mc" (tween) as obviously it doesn't work being nestled 2 levels deep. I have the following code in the main timeline
[Code]....
View 5 Replies
Jan 8, 2010
I hope this isn't too vague, but I'm stuck on a problem that has put me in an Unfortunate Position. I'm Flash developer getting my feet wet with with AS3 and am trying to build an interior decoration tool for a client. My thinking so far has been: create the basic user interface, get the screen flow down, and then finally use a couple of simple arrays to store user selections and stuff like that.
Naturally my 'couple of simple arrays' is totally inadequate to model the many user decisions that my program has to take into account. So I find myself trying to create an enormous, multi-dimensional array with several layers of nesting and before Panic sets in. Here's an example of my thinking for the 'bedding' component of the application in pseudo ActionScript:
[Code]....
... keep in mind that this is just a fraction of what goes into bedding and there are several other of these kinds of arrays that would go into a room like flooring and walls and funture... all equally complex. And I'll need to frequently access different combinations like, how many options under bedding have no value associated and things like that.
So, I realize I'm out of my league and am going to get hurt on this,My questions are:
1) Could it be that using nested arrays like this actually isn't such a bad thing and I should just stick it out? That would suprise me, but I want to make sure I'm not already on the right path.
2) If not, where do I go from here if I want to do this right?
Off the top of my head I feel like I could maybe make everything class based. So my sheets are a class and beds have instances of sheets and rooms have instances of beds... etc. It think it would be complicated but might be the way to go. Or maybe, I go the XML route and store all of the room options in nested blank XML nodes that a user then populates as they move through the application. These are my thoughts but I'd like to hear what more experienced members of the community say.
View 2 Replies
Dec 30, 2009
I need to generate a list of text string items with elements that I can assign a mouse event listener. The event listener would respond to small segments of the overall textField text string. I am not sure how to do this. But the idea of nesting textFields within the main textField object to provide the funtionality I am interested in.
TextField.text = <text string> <textField with clickable text string> <text string>;
View 6 Replies
Aug 24, 2009
I am trying to make an interactive flash application that works by detecting mouse overs and clicks on various buttons/movie clips and then moves to the appropriate part of the time line. But I am having an issue when I use more than one addEventListener in any one frame. I have attached the code for one such frame below. When I comment out the addEventListner and the other code relating to the followBall function this works fine and directs the user to frame Inlet_Valve_Open_Frame but now only the followBall function is working and when i try to click on the Inlet_Valve_Button movie clip nothing happens.
Can someone please help. I have never read all the help files on the adobe flash CS3 as i don't have time and i have built this code up based on examples i have found online. I wanted to include my fla file but it's to big 6Mb. But i have attached the swf so you have an idea what i am doing.
[Code]...
View 1 Replies
Dec 30, 2008
Is there any way to add an eventListener to a variable that listenes for if it change value?
View 2 Replies
Feb 4, 2010
If in a situation, the addEventListener is being assigned more than once for same actionwhat will happen then? Suppose on frame 5 there is ample_btn.addEventListener(MouseEvent.CLICK...... ... and when user navigates the application/site it comes on frame 5 again and again. Will the addEventListener be applied more than once on that button? If yes then what will happen on clicking on that button? will the associated function be called more than once now?
View 5 Replies
Feb 7, 2010
I have made the flash file into CS3 and simplified the idea a bit. Basically I want to click the box on the right to start playing the song and the spectrum and then if I click it again it will stop playing the song and the spectrum then if I click it again it will start playing again ect ect. I could not upload the song.mp3 cause the file size was too big you will have to replace it with another mp3 in the root of the folder and name the mp3 song.mp3.
View 3 Replies
Nov 2, 2009
I want to do something quite simple, but am new to AS3 and the changes since AS2.I want to click a button (play_btn)Then when this happens it opens a SWF (movie.swf) into a placeholder (placeholder_mc) onto the stage. That's it!
play_btn.addEventListener(MouseEvent.CLICK, placeholder_mc);
function placeholder_mc(event:MouseEvent):void{
trace("pressed");
loader.load(new URLRequest("movie.swf"));
}
View 4 Replies
Nov 27, 2008
I have created a scrolling bar menu. All the buttons in the menu work except for the last two. When I place a trace statement within the function it definitely is listening to all the buttons except for the last two. All instances are named correctly. Can the size of the scroller be contributing to why the addEventListener is not working?
View 5 Replies
Aug 13, 2011
I want to put each button to be addEventListener. But the compiler throw the error message that $alph is a undefined method.What can I do
"D_btn","E_btn","F_btn","G_btn","H_btn" ,"I_btn","J_btn","K_btn","L_btn","M_btn","N_btn","O_btn","P_btn","Q_bt n","R_btn","S_btn","T_btn","U_btn","V_btn","W_btn","X_btn","Y_btn","Z_ btn");
[code].....
View 5 Replies
Nov 11, 2009
I have this map I'm creating in Flash. You click on a state, then you can click on an icon to view a tooltip/popup of some information. What I was trying to do was instead of creating new functions and event listeners for every different icon is to use a for loop...but it's not going so well.[code]...
View 2 Replies
Jan 8, 2010
I have created a navbar in flash with 5 different movieclips I use as buttons. Each movieclip(button) has a different instance name. Is there a way to use addeventlistener so that I dont have to do soemthing like this[code]...
View 1 Replies
Sep 10, 2009
I want to add a series of event listeners. they work fine in individual lines of code:
ActionScript Code:
home.addEventListener(MouseEvent.CLICK, route);
resume.addEventListener(MouseEvent.CLICK, route);
portfolio.addEventListener(MouseEvent.CLICK, route);
contact.addEventListener(MouseEvent.CLICK, route);
but when i use this loop, i get a 1006 error, "value is not a function":
ActionScript Code:
var buttonNumber:Number;
var buttonName:Array=new Array("home","resume","portfolio","contact");
for (buttonNumber=0;buttonNumber<4;buttonNumber++) {
buttonName[buttonNumber].addEventListener(MouseEvent.CLICK,route); }
is there something obvious that's wrong with my last line in that loop? i've narrowed it down to the part where I call the array value. but after that - I'm at a loss!
View 2 Replies
Dec 18, 2009
I'm trying to use addEventListener with a SimpleButton object. In an earlier version of my movie, I had identical addEventListener code on a button from the library, and it worked great. But I had to switch to creating the button in AS3 instead, and now the code won't execute. [cpode]...
View 3 Replies
