I have problems with Darwin Streaming server 5.5.5 on Debian.When i'm trying to open some stream, for ex.player reports it can't load stream and breaks connection."Access History" section reports file was requested, so, at least initial connection is working, but nothing more.
View 2 Repliesi have to implement flash streaming for the relaunch of our video-on-demand system but either because i haven't worked with flash-related systems before or because i'm too stupid i cannot get the system to work as it has to.
[Code]...
I have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 Repliesi try to play video on Mac OS system using the standard embed code:
<object height="409" width="600"><param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" /><param name="flashvars" value="src=rtmp%3A%2F%2Fmy-server%2Fvod%2Fflv%3Amy-videoposter=http%3A%2F%2Fosmf.org%2Fimages%2Fposter_cathy_fmp.jpg" /><param
[Code].....
on Safari and Firefox but it doesn't work!
Is it a FSM problem or Flash Player problem?
We are streaming a one hour F4V from streaming media server 3.5.2 and for some reason it is seeing our one hour video as being 10 hours long. We have tons of other videos and never ran into this problem in any of the other files. This is the only file that exceeds one hour. This occurs in the default player from the streaming server.
View 1 RepliesWe (the university I work for) want to add an IP camera to the top of a building (so it has to be IP, we can't put a machine up there, so USB is out of the question) to stream a live view of the quad. The problem is, I can't find a way to stream any IP Cameras through the flash live encoder. I tried a camera by Axis, but their capture driver only supported MJPEG which the live encoder does not.
View 3 RepliesHow can i connect to my own server to watch my streaming video from another computer?
View 10 RepliesAs of Flash 10.1, they have added the ability to add bytes into the NetStream object via the appendBytes method URL...The main reason for this addition is that Adobe is finally supporting HTTP streaming of video. This is great, but it seems that you need to use the Adobe Media Streaming Server (URL...) to create the correct video chunks from your existing video to allow for smooth streaming.I have tried to do a hacked version of HTTP streaming in the past where I swap out the NetStream objects (URL...), but there is always a momentary pause between the chunks. With the new appendBytes, I tried to do a quick mock up with the two sections of video from the preceding site, but even then, the skip still remains.Does anyone know how the two consecutive .FLV files needs to be formated in order for the appendBytes method on the NetStream object to create a nice smooth video without a noticeable skip between the segments?
View 6 RepliesThe company I work for installed FMS on a server running Centos for a customer who needed streaming media capabilities. It worked fine for 3 months until today the customer called us and informed us that their client program can no longer connect to the streaming media server. No one has done anything to the server to cause this to happen. When attempting to access the admin console to diagnose the program, the streaming server returned a 500 Internal Server Error. So I tried another page. Same result. Reboots of both the hardware server and the FMS have changed nothing.
View 5 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesThe $995.00 version is listed as not supporting server side playlists. Is it possible to implement internet TV station like functionality using that version? I would like to have a list of files to play out and have it so those connected are all viewing the same thing.
View 1 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI am using progressive streaming with VideoDisplay, the HTTP URL provided gets buffered completely even if I have configured it to start playing the video when the buffering reaches 20%, the trace message shows that the playing started(using mozilla /Flashbug+Firebug), but it doesnot show the video till the buffercounter reaches 100% How can I get the video stream to play at the 20% of stream.Code Segment where the check takes place
var loadedPct:uint = Math.round(100 * (event.bytesLoaded / event.bytesTotal));
trace('waiting...');
mainVideoCanvas.addChild(LoadingImage);
VidLoadingLabel2.text = loadedPct.toString();
[code].....
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I've been trying to insert a video in a flash project that is hosted on a flash media server. I put the address wich by the way is [URL] and it doesn't work, I'm pretty sure that the address is right, am I misssing something?
View 2 RepliesWe are running Adobe Flash Media Server 3.5.2 Streaming Edition. It is running on a dedicated physical server with 4 cores and 4 gigs of RAM.
I tested the FMS thoroughly before moving to production. I tested by throttling my bandwidth to simulate different connections. Streaming worked great, but almost all of the testing was INTERNAL, not external. We recently started publishing some videos external. We are getting complaints all over the place that the video is choppy.
During our troubleshooting, we started using one of the native videos from the FMS install. The video is only 5 MB. We have tested from several different connections... Fiber, Cable, DSL.... The test video from our Flash Media Server is choppy... It buffers quickly all the way through playback, it is horrible. We published the same video on a public FMS and it works flawlessly from all of our test connections. Our expert developer has published a CF page with both videos, one from our FMS and one from the public.
I am testing the P2P function of Flash Media Server 4.I have setup two environment for testing, but only one can success to using the P2P.However, i found that there is some problem in network connection.Here is my procedure to create the Peer to Peer Multicast.1. Using Multicast Config Tool ( oolsmulticastconfigurator) to create the "Peer to Peer" type (Generate the manifest.f4m and copy the publisher stream name to flash encoder) --> multicast type: Peer to Peer --> RTMFP URL: rtmfp://true ip/miltocast --> stream name: livestream --> publish password: password --> group name: fms.multicast.example --> ip multicastaddress and port: 224.0.0.254:30000 Using Flash encoder with the public stream name connect to flash media server.3. In client side, we use the example player ( oolsmulticastmulticastplayer)
First Environment (A) - not work
1. Flash Media Server (Data center)
Data center reported that "All the port have opened (TCP/UDP)
[code]....
I know that is possible to make a p2p webcam stream with Cirrus/Stratus or with Adobe liveCycle, but the first is not for commercial use and the second use an adobe's server. Is possible to set up a my own server with Flash media server 4 and then create a application to do what i want? I would to create a webcam stream 1->n using p2p. I cant find any example or any documentation about that and how work the rtmpf protocol of fms4. If i was not clear make me any question.
View 1 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesI would like to ask if Adobe Flash Media Streaming Server (not Interactive) supports the following Stream.play (server-side streaming), but not necessarily server-side playlists which I know is a FMIS featureunsigned server-side asctionscripts (main.asc) The difference is in the price of course, one is $1000, the other is $5000, so if the two above are supported, I will buy FMSS
View 1 Repliesis it possible to built a Video Chat without the need for server side code so that I can run it on a Flash Media Streaming Server?
View 7 RepliesFlash media server 3.5 to stream live video to a webpage with flex GUI embedded in it.For this I have used Adobe flash media server start screen .I could able to stream video correctly.I want to know how long it could be do like this.ie suppose I have to stream like this for 3 or 6 months
View 2 RepliesI have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 Replieshow can we catch streaming from Shoutcast in Flash?
View 2 RepliesI download the Flash streaming server and install it its work fine.I want know about the following question: how to stream the video using playlist? What is the format of the playlist? can i create a playlist from visual studio.Net and pass the value to the player?
View 1 RepliesI am a professional video editor specializing in corporate video and occassionally TV commercials. We often post "review" videos in Flash format to our website for our clients to check progress, etc. These videos are usually around 3 minutes in length and occasionally reach 20 minutes Trt. We use Adobe Production Premium CS4 which includes Flash CS4. I usually export the videos at the included preset, "Web Large Widescreen". The playback is almost instantaneous on most DSL and T1 connections. I use the "Full Screen" option button and when the videos are viewed full screen, they look amazing.
Here is the issue: I have recently created a video for a client that contains text and is approx. 50 minutes in length. The video format is 4x3 and the client wants the transcoded Flash video to display at a 640x480 square pixel dimension. The video plays fine over most DSL connections. It chokes on T1. Question: Can streaming Flash video provide better quality and playability for longer duration Web videos? Could any of you direct me to a chart that compares streaming Flash with the "simulated" streaming typically exported from Premiere CS4's Media Encoder?
we are using flash interactive server 3.5 and have just noticed that when flash player upgrades to 10r32 the streaming fails? Is this a known issue and does anyone know if it is specifically a rtmp prob?
View 4 RepliesIs it possible to capture/encode a video file on a slow machine, then upload it live to a Red5 or Adobe Streaming server, and have that server stream to file live to flash clients? If so, what protocol is used to stream the data from the encoding machine to the Red5 / Adobe server? I see a lot of things about RTMP, but am I correct that this protocol is used between Streaming Server and Flash client, but not from encoding machine to Streaming Server?
View 1 RepliesWe are deploying a media management system within a local network. FMS will be used to serve the media within the local network. Since we will only have max 100 users and we have a powerful dual 4 core xeon and the plan was to install IIS and FMS on the same machine. But now I read that there will be a conflict because the embedded Apache server that FMS installs will fight for port 80 with IIS.
So one possible solution: I've been reading in the Adobe docs that RTMP is far more efficient than tunneling through HTTP, so if we make sure all client machines allow RTMP (firewall exception) can we then change the configured Apache port and assume that Apache will never ever be used?
Heck in this case can we configure FMS and choose not to install Apache at all and be OK?