So I'm creating a movie clip using flash... Is there any way to start playing the movie from a certain frame (lets say frame 550) which I hit Ctrl + Enter So I don't have to watch the entire movie to test it?gotoAndPlay(550) doesn't work.
View 2 RepliesI recently installed Adobe Flash Professional CS5, but now any SWF I have on my computer won't play. If you double click on them the files aren't recognized by any program. A pop-up window then asks if you would like to search the net for the appropriate program. I downloaded the latest flash player, but that didn't work either.
View 2 RepliesI have made a mp3 player that is working fine, it plays a mp3 radio stream for several hours (last crash was after 6,5 hours) and then it crashes without any message or exception. This is very difficult to debug because it only happen after a couple of hours with the same stream. It appear in all browsers so it is a Adobe Flash problem or is this a buffer problem?
Must i use other buffering settings to play MP3 streams? Does anybody know this problem and what can be done to avoid this? Also another question is why memory consumption after hibernation of the pc is growing dramaticly (every second it eats a couple of 10Kb). After refreshing the page it is stable again. Why is this happening? Mp3 player is made in Flash 9 (CS3) with AS3 and the player is Flash 10 (latest). Running on Windows XP Prof with 3GB RAM.
After installing the latest version of flash (10.1 I think) it keeps crashing while playing on a game that requires it. I have uninstalled and reinstalled and it just keeps happening.
View 2 RepliesI have tried really hard to find an example showing how to play speex encoded audio in flash. I tried the following code -
var connect_nc:NetConnection = new NetConnection();
connect_nc.connect(null);
var stream_ns:NetStream = new NetStream(connect_nc);
[Code]....
I tested the above code with .flv videos and AAC encoded audio files and it works just fine. But when I try stream_ns.play("sample.spx") I get a stream not found exception.
Am I using the wrong container (.spx) for speex audio. Is playing speex audio from a file supported?
I have tried really hard to find an example showing how to play speex encoded audio in flash. I tried the following code -
var connect_nc:NetConnection = new NetConnection();
connect_nc.connect(null);
var stream_ns:NetStream = new NetStream(connect_nc);
[code].....
Is there any possible way to play a .jpeg sequence using .flv player on-the-fly ? I mean, by not needing to convert the entire sequence into one single .flv ? Since I'm not familiar with flash neither action script, I was surfing the web in hope to find any template or tips about similar things to that but I couldn't...
Here's the main list of features:
1- Browse button to load a sequence eg. < filename >####.jpeg
2- Play button with a slider time
3- Previous and next frame-by-frame buttons
4- FPS slider from 0 to 30
My main reference is this stand app called Cyber-D's Image Sequence Viewer.
I am currently working to a Role-Playing Game in Adobe Flash CS3 with ActionScript 2. I must include doors inside rooms, but when I do that, my player dissapears. I use this code:
Code:
...
for (var i = 0; i<mapHeight; ++i) {
for (var j = 0; j<mapWidth; ++j) {
this.attachMovie("tile","t_"+i+"_"+j,++d);[code].....
I have a Flash Project that has 2 Animations in it and when I Play the movie and click the button that is specified to play the sample motion animation Both Animations Play one after another.
I am trying to use my buttons to single out each Animation and play each by ITSELF.
Can someone take a look into my file and see where I have messed up?
Here's the file: [URL]
this is a super newbie question, but i can't figure it out. I have a flash project(not mine), where i can find several symbol definitions in the Actions Frame. How to add symbol definitions there? I managed to create symbols by dragging (for example) items from library on stage and then pressing F8. I can get a reference on them in the Action Layer(frame 1) under Scene1, but i would like to know how to add these under Symbol Definition(s). Sorry for the question, but i am new to Flash Professional.
View 1 RepliesI have a flash file where the first frame contains two buttons, one of which takes the user to the second frame, and the other takes them to the third frame. At each of those frames, various text fields and variables can be manipulated via SimpleButtons. Both Frame 2 and Frame 3 have "back" buttons to take them back to Frame 1.
Currently when the user navigates back to Frame 1 for the second time (thus playing it for a third time), my second button appears to no longer exist, and I receive an error. Both buttons on Frame 1 were placed via the Flash IDE. Why is my button popping out of existence, when it did perfectly fine the previous two times? Below is my code for Frame 1. The "back" buttons simple remove event listeners and then call gotoAndStop(1)
var inited:Boolean;
var cache:SharedObject;
var libsans:Font = new libsansreg();
[code]....
I'm a newbie at Flash, so started playing with a pretty standard code sample: one layer contains a movie clip with a flying rectangle, another layer has a button to control it. All script code is in Main.as file. The rectangle was named square1 through the Property window. Here is the problem: the constructor for Main has a line: square1.stop(); to prevent clip from playing, but it doesn't help - it plays. I know the constructor fires, because it has trace("stuff") in it. The code does check that the stage has been created.
What strange is that square1.currentFrame always returns 1, and square1.totalFrames returns 1 as well. The layer has 24 frames on the timeline. I tried a tween with just 2 keyframes, then converted whole tween into frames - same result. I mean, the thing is flying before my eyes, how can it be 1 frame???
I even added a listener: square1.addEventListener(Event.ENTER_FRAME, onFrameChange); The event fires all the time, i.e. the frames change, but currentFrame is still 1. Also, tried to name individual frames and use square1.gotoAndStop("begin") and stuff like that. I am really stuck with this stupid problem.
This is quite often seen on video sites(to insert some advertisements),
the newly inserted frames should be dynamically generated from the web server,
how to implement it myself?
I was wondering if someone can help me. I have some difficulties playing a certain frame in another MovieClip. I have two MovieClips, MovieClip(content) and MovieClip(about_page). The about me button is placed in MovieClip(content) and I used the following code to go and play MovieClip(about_page) that is placed in the timeline:
about_btn.addEventListener( MouseEvent.CLICK, myrl1 );
function myrl1( event:MouseEvent ):void
{
gotoAndPlay("37");
}
But now when MovieClip(about_page) loaded i have a button that must go back and play a certain frame in MovieClip(content) I used the following:
close_btn.addEventListener(MouseEvent.CLICK,close1 );
function close1 (Event:MouseEvent): void
{
gotoAndPlay ("29");
}
[code]....
But for some reason it never goes back to Movieclip(content) and I get the following:
TypeError: Error #1010: A term is undefined and has no properties.
at content_fla::about_page_101/close1b()
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 RepliesI have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......
I have 5 frames in which a different song will be playing, this is the code i used on each frame:
var mySound:Sound = new Sound();mySound.load(new URLRequest("frameone.mp3"));mySound.play();
If im on frame 1 and click on the navigation button to see frame 2, both songs on these frames play simultaniously. how can i stop the background song on frame 1, and have frame 2 playing?
I have a small flash tidbit that is basically used like a menu. It scrolls through the thumbnails left and right, when clicked the pages navigates to the appropriate location. However, the flash movie jumps back to the beginning of the movie. Is there anyway I can get it to stay in the same spot when the page is changed? I tried using iframes, but this did not work out, it had the same result. ref:[URL] to see the problem scroll the images to the right and select 'wall boarder buddy' (fourth image from the left) this takes you the page and the flash resets to its original position.
View 12 RepliesI have a button on the main timeline. I would like to move the main timeline to a frame label called "history" and load and play a movie clip called "slideshow1".
I have the "gotoAndPlay" code working properly but can't seem to get the external swf "slideshow1" to load and play.
I've inserted the following code into the frame label "history" actionscript.
[Code]....
i want my movie to stay on one frame for 10second and second playing the next frame.
View 3 RepliesI have two movieclips on the same frame but on different layers located within the movieclip. The first movieclip plays just fine. However, the second one isn't going ahead even a single frame. The code that I have mentioned below is located withing the second movieclip containing background image. And I think this code is causing the issue because when I remove this it plays perfectly fine. The function of this code is to automatically re-size background image with the browser dimensions. The whole code just worked fine on the main timeline.However, when I shifted it inside a movieclip its causing an issue.
//set stage for FBF
stage.align = "TL";
stage.scaleMode = "noScale";
[code]....
Where I find the "Frame View" icon in Adobe Professional Flash CS3?
View 1 RepliesI was wondering if it's possible to set up a listener that is triggered when a movieclip hits a certain frame number.
I was thinking it would go something like this:
myClip.addEventListener(Event.ENTERFRAME, frameListener);
function frameListener(e:event):void {
if(myClip.currentFrame == 26){
[Code].....
A.swf has an empty_mc on it's stage. Loading into the empty_mc is B.swf. B.swf plays C.flv. After the C.flv is done playing I want B.swf to tell A.swf to go to frame 3
View 1 RepliesFlash CS3, and I have an FLV video(40 seconds) and a postcard which I want to show in the video farme after the video is complete. The postcard at the end will a link to a URL I've tried all the codes I could find on the internet, but I couldnt accomplish anything. I must be doing something wrong. Here is what I am doing:I put a FLVPlayback component in the first frame on the stage. Give the FLVPlayback component an instance name.Link the FLVPlayback component to a flv file on my server.Put the postcard in the second frame on the stage
View 12 RepliesIve got a standard flash file with the option to play one of three FLVs and when each flv is clicked it makes the others stop.What I need to do is set an action so that when an flv reaches the end of its duration it goes to a specific frame in the timeline?
ps. here is my code
Code:
stop();
import flash.events.MouseEvent;
import flash.media.SoundMixer;
[code]....
In my machine I have installed only Adobe Flash CS5 proffesional trial version. Now this installation is not supporting adobe.utils.Extension class in this version. I have tried with all latest updates from adobe site. My doubt is does adobe.utils.Extension class is available in licensed version of Adobe Flash CS5 proffesional?
View 12 RepliesI want to create a simple game (Adobe Air) based on 2 players using ActionScript 3.Let's assume I want to create online chess game.So that I can play with my friend at work, at home, from anywhere via internet.Should I use flash server? Or something similar for this purpose, or there is simpler way to connect 2 players and make fully functional interaction between them?
View 2 RepliesI am trying to do some scripting in flash. I have some sprites and need them to playing one by one in the main, one in each frame. Then when they are complete let the movie move on to the next frame. how can I do this?
View 1 Replies