Does Flash Builder have any tool for detailed memory monitoring? When my program is run for a long time it gets slower, and I would like to identify the problem. When I press ctrl-alt-del to check my program memory it is increasing, but I am not able find which part of program is responsible for this increase.
View 3 RepliesWell i am not asking about the tool to compress or measure the size of swf file , i need a tool that can show me how many bytes or mbs, my swf is using ??
View 1 RepliesI'm using Adobe Flash CS 4 and would like to know are there any profiler or memory analysis tools available for it ? (actionscript 3). I know there are available tools for Flex, but are there for Flash CS 4 instead?
View 3 RepliesI'm working with a large modular app, and most of the swfs were made in Flash Professional. When I load the app in the Flash Builder Profiler, the memory usage appropriately goes up and down as I add and remove modules. When I flip between two modules many times, I end up with the current memory in the Profiler more or less where I started at around 2 megs. System.totalMemory, however, shows that the flash player has only been allocating memory and is currently using 106 megs. Is there a certain bug known to do this, or is there a better way to detect memory leaks? I'm using the latest flash player debug version.
Note: The SWF modules are all permitting debugging, and the Profiler picks up objects in them.
I was using a trial edition of flash builder 4 professional and I figured before it ran out I would test the profiler. What shocked me was the number of objects that were left resident in memory. After seeing that I decided to set up a small test and had very bad luck. I was hoping someone can look at the following and tell me assumption i have that is just wrong.
[Code]....
Does anyone know if there is a way to make the new Package Explorer window in Flash Builder emulate Flex Builders 'Flex navigator' window?
Bottom line is I don't always need to peer into SWC's, and I don't like having a 'default package' automatically created for me. Not sure why the interface wasn't made simpler, allowing access to more power and complexity only if necessary. I want to focus on the code, not on how to navigate and use the bells and whistles in the coding environment.
I just upgraded to Flash Builder 4 (beta 2) from Flex Builder 3 which I have been using since it came out. Problem: All the projects that were in my workspace from Flex Builder 3 did not carry over into Flash Builder 4 (e.g. in the "Flex Navigator" view if FB3). Flash Builder 4 now uses the .FXP format to manage projects, but Flex Builder 3 did not. Is there an easy way to get all my projects back into Flash Builder 4?
View 2 RepliesI have a Flex3 application which has to be capable of uploading multiple files and monitoring each files individual progress using a label NOT a progress bar.
My problem is that a generic progress handler for the uploads has no way (that I know of) of indicating WHICH upload it is that is progressing. I know that a file name is available to check but in the case of this app the file name might be the same for multiple uploads.
My question: With a generic progress handler how does one differentiate between 2 multiple uploads with the same file name?
I am attempting to monitor the progress of an image scroller I've built and all of the images (thumbs) load separately. What would be the best way of figuring out what the total progress of the images that are loading? I was thinking it would be cool to use a generic loader and apply it to a function such as
myScroller.loadImages();
I wrote an application in flash AS3, and when I trace from flash the total memory usage of the total application is only about 9MB, But at the same time Task Manager Shows the memory usage as 110MB. Around 100MB difference.Flash Trace Method System.totalMemory difference of the Trace from the Beginning of the application to end of the application.
View 2 RepliesThe NativeProcess is having a big issue which would hang/sudden stop response after 1-2 mins of running. I wonder if anyone else encounter the same issue?I have tested on Windows 7 (64bit).If there any way to launch an exe and release the Nativeprocess handler from monitoring the process or other method will be appreciate.
View 1 RepliesI have an AIR project that I was working on Flash Builder 4.5 which now I'm trying to import to my updated Flash Builder 4.5.1 and it is prompting me to fix some paths before the import is completed. I'm kinda clueless what I should put in those fields.
[URL]
The project access a web server to retrieve data using JSON.
I am trying to migrate a project from Flash Builder 4.0 to Flash Builder 4.5. After Flash Builder prompts me to choose my new SDK, I choose 4.5, Then I get the following error:" error "The required skin state 'disabledWithPrompt' is missing".
View 1 RepliesI am attempting to make a simple class that I use to debug some of my code at runtime. I use a function in my debug class to pass a variable from another class that I want to monitor in realtime. For simplicity sake I am only passing Stings at the moment. I can pass the variable that I want successfully but I am stumpted as to how I to get my DebugClass to monitor that variable in realtime. Since the variable is being altered in another class, what would I needto do to have the debugClass monitor that variable without having to call a new function everytime the varible changes, which could be 300+ times a minute.
This is the current method I use to add the variable to my displayList:
protected function addDebugData(stringToAdd:String):void{
var debugText1:TextField = new TextField();
debugText1.border = true;
[Code]....
I'm trying to track the progress of a file upload in AS3, and I'm getting strange behavior. When I select a file and upload it, the progress is instantaneously 100% even if the file is 10 or more megabytes, but it's not finished. The onComplete event is fired about 30 second to a few minutes later (depending on file size) when the file has really finished uploading. I've tested this locally and on the server, the behaviour is the same. Has anyone else experienced this? Very frustrating ...
Otherwise, the file is uploading fine. The code is simple:
myFileReference.addEventListener(ProgressEvent.PROGRESS, onUploadProgress);
function onUploadProgress(e:ProgressEvent) {
var pctDone:Number = (e.bytesLoaded / e.bytesTotal) * 100;
trace(pctDone);
}
When setting up a source control repository for a Flex Builder workspace, what do you consider to be worth checking in? Do you exclude the workspace .metadata folder but keep the .project and other project specific files? Keep both? Throw away both? Is there a guideline you use to decide which is worth holding onto or do you do it out of practical experience?
View 2 RepliesFrom a video on AdobeTV, I tried to play with example empWeb (LiveCycle Data Services).In Flex Builder 3 (FB3) everything works fine. When I tried this on Flash Builder 4.0 Beta (FB4) it doesn't work. When I replaced original xmlns declarations (2009, spark, halo)with declarations from FB3 (2006) it works. Could you explain why?I'm using the default SDKs (Flex 3.2 for FB3 and Flex 4.0 for FB4). I investigated this (please see 3 source code examples). Source #1 works OK in FB3 and FB4, Source #2 gives a FB4 compilation error message: [code]
View 1 RepliesHow do you know if your compiled SWF file has a memory leak?
Are there tools, a firebug setting, etc... to see if there is a problem? I cannot find much in the debug Flash player besides file size and loading time.
I have a large Flash application that I maintain and suspect that is using way too much memory so I wanted to measure the amount of RAM being used while it executes to find key areas to optimize.
Is there any way i can get CPU usage and CPU memory usage details in flex? I know that flash can't access any system resources.
View 2 RepliesI am a flex programmer but i had nothing to do for handle manage memory in my projects. I think lack of memory management is reason for loading lag of swf file. Can any one help me to how to handle manage memory in flex/ as3 codes.
View 1 RepliesI have a Flex module created in Flash Builder 4 as a swf file. I am trying to load and run in within a Flash application. I can get the module loaded but I can not get the flash application to access any module functions. Here is how I load the module in Flash and the error I get. If I change the module to an application type swf then it loads and runs but now I have two applications on top of each other. I would like the loaded module swf to be able to have access the Flash stage object.
ReferenceError: Error #1069: Property application not found on MyModule__mx_core_FlexModuleFactory and there is no default value.
var loader:Loader = new Loader();
[code].....
Is there a debugging tool for Flex that functions like Silverlight spy or FireBug?
View 2 RepliesI just got CS5 master suite which includes Flash Builder 4 and Flash CS5 Pro. When I create a new AIR app in CS5 pro it says "AIR 2" but when I create a new AIR project in Flash Builder I do not see anything indicating that it is AIR 2 or 1.5?
Is there a way to tell which AIR runtime it is using?
I am using Flash Builder 4 on my MAC. Flex SDK 4.0. Flash Player 10.1.By executing this code below I only see the trace saying "start". And if I look at the Declaration of the ENTER_FRAME is see the error saying: "Source could not be found for flash.events.Event.Enter_Frame in...."But the playerglobal.swc source is there, and I have tried different SDK versions and FP versions.If this is a Flash Builder problem I can not be the only one having this issue?[code]
View 1 RepliesI have a flash application which consist of Grid Components, Button, Label, and Combo-box Components. All these components are used more than 70 times(simultaneously) with in the application. So Its takes too much of memory. So How can I test the memory usage of each component at the time of running. Is there any plug-in available for browsers to find the memory usage. I'm using flash CS3 and ActionScript 3.0. The application suppose to run in browsers.
View 4 RepliesCan someone explaine the deference between Flash CS5 and Flash Builder 4 and Flex CS5?
View 1 RepliesI'm setting up a build system for a Flash Builder 4 (Flex 4) based project; and I'm struggling to get a setup that compiles in the IDE the same as it does from the command line on the build server.I come from a C# background; and my expectation is that I'll be able to create a "solution" with a collection of "projects" that I can compile from the IDE, or from the command line on the build server.The best I've managed sofar is 2 separate build "scripts", a custom ant script for the build server, and the default Flash Builder IDE config based on a workspace; but this is making my DRY daemons jump around in fury.
View 1 Repliesi'm slowly making my way over to Flash Builder from doing all of my programming in Flash Professional.
it's not an easy transition since things i've taken for granted in Flash Professional are completely different in Flash Builder.
first, FB4 will always automatically convert my function (even pasted functions) to look like this:
[Code]...
I have some UI components (Toolbars and buttons) that I drew in Flash and was wondering how I can use it in Flex via the Flash Builder?
View 1 RepliesI've been working in Flash BUilder 4.0. I installed Flash Builder 4.5, and switched to the workspace I had used for 4.0. Then we were told to go back to 4.0, and now I can't run or debug. I can build, but then I have to double click on the .html file to run. Right clicking doesn't bring up run or debug, and the run and debug icons are not in my toolbar.
View 3 Replies