I was to just put a button component and the script below for the page to go back to home when pressed:
[code]...
For some reason, it's giving the following error messages below Don't know why this is happening - it is supposed to be a simple script to work quickly error-free right?
look into the Fla when I press the submit button without filling the name field the error message displayed Enter Your Name, how I write the code for the combo box so that without selecting a country no body can proceed ?
View 2 RepliesI have referred this for creating error message tool tips, to be displayed continuously unless the error is resolved by the user. :: [URL]
But, this is being applied to a pop-up window visualized as a pop-up form.
When the user clicks 'CANCEL' button, I want the error message tooltips if present to be cleared off from the screen. The message tool tips remains on the screen even if the CANCEL button is clicked.
I am just retruning to flash from cs2 and its much, much harder.I want to create one simple mute button. Does anyone havea link to how I can do this from start to end in cs4? Everything I've found ends with me getting the error message: "Current selection cannot have actions applied to it" while tutorial carries on and neeer address this as a possibility.
View 1 RepliesI'm having a problem with Flash and InDesign (both CS4), installed as a bundle in one go from Adobe Master Collection discs, When trying to launch InDesign or Flash, I get a message that they are 'not supported on this architecture'.
I'm on a MacPro with 2x3GHz Quad Core and 4GB running 10.5.7.
All the other CS4 Master Collection apps have installed and run fine.
My volume is formated as Mac OS Extended (Journaled).
I wanted to report a problem I've been having with Flash CS5.5 on MacOS 10.5.8 When I drag an element (usually a line or shape) with the alt key pressed (in order to create a duplicate on the stage) sometimes I get a couple of message boxes appear that say "Panel x could not be created removing it from the list" where x is a number like 7 or 9. After I click through these the swatches panel appears in the middle of the screen.
This is quite annoying and holds me up as I have to click through these boxes & then close the swatches panel.
I'm trying to use server capabilities Flash Builder 4. But using different ways (i use 5 or 6 tutorial) get one and the same error within a week - "Channel disconnected - Channel disconnected before an acknowledgment was received." I looked up "gateway.php" and there was not even a closing tag ?>. Error repeated on a remote server (of course I changed all the settings to the mySQL database). Network monitor also gives error.Show where I can find a solution, please? It may be to blame Zend? But how to update it?
View 2 RepliesI'm wondering if there is a way to make flash creating a error message box when I want it to?
ex.
if( g_ContentLoaded == false )
CreateErrorBox( "Content was not loaded" );
I recently had an error dialog popping up on a site of mine online. I just noticed one on a well known newspaper website. Are these new? Do they only pop up if you have flash on your machine or do all users see them? Jpeg of the error message from the newspaper site attached. with my site the movie ran perfectly when I did test movie. Online the error message popped up, clearing it caused the movie to display incorrectly. Running in Debug mode showed the error and I fixed it. So in some way the error message was useful. Thing is the site had run perfectly well before the error dialogs mysterious appearance, the error was probably there but had no effect.
View 4 Repliesim getting an error message that flash cant find the base class. i put the as file and the fla file in the same folder, isnt that the first place in the classpath?
View 1 RepliesI have encountered a problem with the "message" property of the "Error" class.The problem consists in the difference of the message text between the Flash Player of the Flash program and the Flash Player of the browser.I am using the "try, catch" statement to catch en error and afterward I display the "message" property of the error in a text field.In the Flash program, the text field displays the full error message, something like:Code:Error #1085: The element type "something" must be terminated by the matching end-tag "</something>".But in the browser, it only displays the code, not the description of it as well:Code:Error #1085Is this an error ? Is there a way to go around this ?
View 3 RepliesI am trying to and I have the following message error:"the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found."
View 1 RepliesI've created some error handling for external images loaded via a path in XML. Within the Flash preview it's fine and shows the full error message (and most importantly, the URL that isn't loading).
But in the browser, even locally, it doesn't out put this message!
Here's my code:
function loadIOError(event:IOErrorEvent){
errorLog+=event.text+'
';
}
[Code]....
#1006: value is not a function. at MethodInfo-43() I don't know what the problem is, or where could it be, here is the problem code, but first a brief description: Every 3 seconds 3 enemies will be created with a random position, the enemies can't be appearing on top of the other so I check if they collide with any previously added enemies, if they do I assign other random coordinates and check again until there is no collision (I'm using the collision detection kit CDK for the collisions[URL]..the first 3 enemies appear correctly but afterwards the error appears and the next time the program enters the generation part the enemies begin appearing in ridiculous numbers.
[Code]...
i am new to flash (yet i have been using it for years) by that i mean, i struggle with it a lot. i was hoping someone could help me with the "incompatible override" error message and the "duplicate function definition" message.
[Code]...
i am currently trying to learn ZendAMF, but i have a hard time troubleshooting which makes learning it quite hard. Is there a way to make the PHP file throw an exception that gets traced as an error message in AS3 (not Flex), the only error i seem to be able to get is "Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Call.Failed", but it tells me jack ****.
i have gotten ZendAMF working, i just want to know how i can make error handling better, so that as an example can use PHP to tell flash that no results were found, or that the typed text was invalid. Is it better to use AS3 to check if the field was filled properly?
I have 3 insances of the button component on stage named 2_btn, 3_btn and 4_btn.They all are broadcasters and have been initialized.I want them to broadcast an event and pass a variable along each time they are pressed.[code]
View 1 RepliesI want to log errors of my flash application after I released it.I will save the logs on files on the web server.Do you know how to get error message and stack trace when you use normal version(not debug version) of flash player?
View 1 RepliesFlash version CS3 AS version AS3 Skill level - AS2 Flash 8 - better than Average. Skill level - AS3 - a little better than beginner.
Problem: Creating an FLV movie using CS3 / AS3 FLVPlayback component. Having problems with buffering issues - large FLV file 23 MB
I'd like to add either text or an animated movie clip that displays a "buffering" message before the movie is loaded enough to play AND if the play head catches the buffer, I want it to show again until the movie has rebuffered and then disappear when it starts playing again.
how this can be done with a custom player using netstream, but having a heck of a time finding anything that shows how to do it with the FLVPlayback component.
What I've done:
This is my video as it stands at the moment. [URL]
I have added a progress bar per the instructions in this tutorial [URL] (I used the section titled: "Adding a progress bar component" - the code is identical to what is displayed there.)
However, even though the progress bar is displayed, it is not displayed long enough for enough of the FLV to be buffered to play smoothly.
Hence my interest in adding a 'buffering' message. Either that, or display the progress bar long enough to buffer enough of the movie so that it doesn't stutter or stall during initial playback.
I have a component "child" which has a cancel button. Now this component is placed in a state called "newChildComp" I also have another component called "parent". In the parent component, i have a button that dispatches an event. Here is the event code:
[Code].....
so, basically,i am checking to see if the cancel button component in the Child component, while i am still in the parent Compoent, was clicked, if it was clicked, call the cancelButtonHandler. The problem is by the time the addNewChild handles the event, that cancel button was still null. My question is how do i solve this without using the itemCreationPolicy on the cancel button?
I have a custom TextInput-based component for date and time with certain restrictions on what's considered "within range". But it's still fine to insert dates that are outside the range. When a user types in a date, on valueCommit, I'd like to be able to display a hovering notification to the user, to inform/warn them that the date is outside the accepted range.
I'm thinking of notifications ala the Validators, but I'd rather not use the Validator mechanism because it's really not validation, just notification. Something like a tooltip, but it will only appear if the user changed the value. Maybe an effect of some sort?
I've been working on some actionscript 3 system. And all of a sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in Flash CS3, a white screen would open up (instead of the normal flash program) and no trace-output would be given.
Three hours later I found the cause of this weird problem.It's (simplified) the line:
var value:Number = -(true ? 1 : 0); // This one doesn't work.
Put this line in your script, and your entire program won't execute. And without any error message! I was wondering, why is that? By the way, the following lines do work[code]...
I am building a calculator which recommends battery chargers based on the value the user inputs. If the user inputer letters instead of numbers (including spaces) the numeric result displays as NaN, is there any way to create an error message which pops up when the result is NaN and tells the user what they did wrong I have tried [code]where ampSuggest is a numeric variable that is the resulting number from the users input and wrongInput is a one frame movieclip.This method gets no error messages but doesn't seem to actually do anything.
View 2 RepliesI'm just trying to figure out this error message that comes up when I am importing a video into flash. It says: 'NetStream.Play.StreamNotFound: Adobe flash tried to play a live or recorded stream that does not exist. Source can't be found'
View 2 RepliesOn the first frame of my timeline is the code for an MP3 player that exists in the 4 following frames, which are separated by frame labels. I am trying to call a different Mp3 URL in each different frame, but am getting this error msg: TypeError: Error #2007: Parameter url must be non-null.
Here is the code on the 1st frame:
Code:
var sndObject:Sound= new Sound();
var chaObject:SoundChannel= new SoundChannel() ;
var sndTransform:SoundTransform= new SoundTransform();
var reqObject:URLRequest = new URLRequest();
var sndBytes:ByteArray= new ByteArray();
var intPosition:int = 0;
var bolStop:Boolean= true;
function initMP3Player(reqObject:String):void {
[Code] .....
And this is how I am calling it on 4 following frames:
Code:
initMP3Player("[URL]");
Any work-arounds to what appears to be a bogus error message?Multiple buttons to control a movie and one (defined with the exact same process/steps as the others) results in the 1120 error.[code]No syntax error, but test run results in 1120 error on the P_button event.Instances are established for both and the names are spelled correctly. Is there some undocumented feature about what characters can't be used in instances and button/movie definitions?
View 2 Repliesit seems that I have installed wrong or corrupted component files, because every time i open Flash and try to use any component, there come error messages like "Unexpected file format" and Flash closes inmediatly after that... I reinstalled Fash , but it is still displaying that error... so I guess there must be a file where I can delete all the previous components installed, and make it work from scratch... how do i do it
View 6 RepliesI have custom validator apllied to many comboboxes in different tabs of application. Its is performing the same validation for all the comboboxes. The only difference is for ecah combobox the custom validator should return a different error messagae. How can error message be specified.?like some error property in mxml or by somehow passing the error message as parameters to custom validator class, as I dont want to have one custom validator for each component.
View 2 RepliesI have a class, called GMScores, and in it I have two variables gameStamp, and gameID.Here is a short version of the class:
ActionScript Code:
package {
import flash.display.Sprite;
[code]....
I was trying to create a play and pause button for a long animation. It was decided not to have a pause button, just a button to start. After deleting the pause button and all ActionScript to do with it, I now get this output error[code]...
View 2 Replies