i'm using swfloader to load swf file in the middle of the screen using the following command:
<mx:SWFLoader id="game_swf" source="crazy_counting.swf" x="198" y="0" width="721" maxWidth="721" height="531" maxHeight="531" />
now stage of the flash file takes the exact size that i stated by the flash file itself is overlapping the stage with some graphics
I want to load in a SWF and set it to fit in the window, whilst keeping it's aspect ratio.When I do this by setting the height and width of the SWFLoader, the SWF will resize to best fit in the space (as it is keeping it's aspect ratio).However I can't find a way to detect the height and width of that SWF now it has been resized. The size of the SWFLoader reflects what I set it to, and the SWFLoader.LoaderInfo size seems to be totally random.
I have also tried the loaderInfo.content, but again I don't get a value that compares to the size of the SWF I have loaded (or at lease the size of what is visible).The only thing I can think to do is to know the height and width before and then figure out the aspect ratio, so if I resize the width to 50% of the window, I can do the maths on the height to make the swf loader the same height as it's scaled content.
I've created a Flash Animation (CS5, ActionScript 3) and converted it to SWF. The flash animation needs the values of 3 variables (defined in the swf timeline) BEFORE it starts running in my Flex application. I've embedded the swf file using swfloader in Flex, but I need to pass the parameters from Flex into Flash before the animation starts. How do I do this?
The way I have my flex code setup below, the variables are not being updated. I get an exception every time it gets to the changeParams function because it can't find "Type", "Num1", etc.
Part of My flash code:
//These 3 variables need to be populated via Flex BEFORE the animation starts...
var Num2:int;
var Num1:int;
[Code]....
In Flex 3 I have a SWFLoader[url]...
and after some time I invoke player.unloadAndStop(). And I always get this error:
ReferenceError: Error #1056: Cannot create property __tweenLite_mc on _swftest_mx_managers_SystemManager.
I have one Swfloader. This swfloader loads file A.swf.On creationComplete event, File A.swf loads another swf(file B.swf).
Everything works fine when I run the application once in the same machine.But when I run two or more instance of the application, the first works fine (both file A and B are loaded) but the second swf (file B) is not loaded by file A.why the first swf (file A) doesn't load file B, when the application is running in multiple instance ?
I'm compile a .air file of my AIR application in FB4 and i'm getting that error when I try to install. I tried creating a new app, and just copying the code over and I get the same error. What am I doing wrong?I've even recreated the certificate multiple times.
View 3 RepliesI have a swf file sample.swf which has its actionscript class in Main.as. This Main.as has various objects declared as public in it. For instance lets consider an object myData of class MyData (in MyData.as).
I am loading this swf file in my AIR app using swfLoader. I want to know how do I access myData.func() using swfLoader.loaderInfo.content.
I am using SWFLoader to load a little animation into my flex environment but for some reason the animation is sped up a lot. This is the case with all of the animations I tried. Is there a way to slow it down or fix this?
View 1 Replies[URL] With regards to a parent SWF loading a child SWF via the Loader class, is it possible to prevent the loaded child SWF from:
Making any network calls, or Making calls to specific domains Basically, I'm looking for a programmatic version of allowNetworking:
[URL]
Additionally,Are there any Flash Player version and Actionscript version discrepancies?Are there any discrepancies if using Flex's SWFLoader is used instead?
Flex is good at produce code, whereas Flash is good at animation, how the integration is done? If I want to insert the animation produced by flash, what's the recommend way to do the integration? Do I need to use SWFLoader?
View 1 RepliesDoes anyone know the file size limitation of flex file uploader?
Currently I'm working on a project that uses flex and cake php. I heard that there is a 1GB of file size limitation in flex file uploader.
I am doing a elearning project in flex and it consist in a secuence of swf files and a player that load it based in a xml file, the problem is all swf files contents narrations and I need to control the volume of narrations from the player interface, anybody know how I can control the volume of a swf file from flex??
View 1 Repliescan i save a screenshot from a loaded swf using the SWFLoader class ?
View 1 RepliesHow can I hide a component and what AS3 code to use to hide a Flex Component from an external swf file?
View 1 RepliesI have a MainPage, on initialize I am calling a method which would create a SWFLoader object (aka LoginPage) and loads it in the MainPage. When we run the MainPage in 800x500 window, the LoginPage loads in that window size, however when we maximize the window the content of the LoginPage gets resized to 1027X660, but the border remains 800x500, and the remainig area of the window stays blank.
View 1 Replieswhat is difference between swfLoader(load application) and ModuleLoader(load module)?
View 1 RepliesI created a "Loading" spinner in a SWF. I display this spinner in my main application SWF using SWFLoader.How do I make the SWFLoader transparent? Currently it uses Flex's default background color even though I've set backgroundAlpha="0".
My spinner SWF's main MXML: (Note the use of backgroundAlpha)
[Code]...
I have a symbol in a .swf's library, with a linkage name of "Pana". The Pana symbol is just a 100 frame animation that I would like to have timeline control over in Flex. So how can I load the .swf and then add the Pana symbol to the display list and control it's timeline?
View 2 RepliesI want to create a panel (or any other component) inside a component that has a 5 pixel border on all sides, but scales fully when the window is resized. I know I can set width to "100%" to make it resize, but that gives me no borders. If I put it to "95%",I have borders, but they scale annoyingly. Also, that only works for borders on the right or lower bounds, and not to the left or upper sides.Is there a convenient way to do this without having to write tons of resize-code (in which case I will not bother and just accept bad rescale behaviour, as it is for a private pet project).
EDIT: I know that I can just overwrite the display handling and set the positions manually every frame. I wondered if there is a cheap way to do it in the mxml-structure, along these lines:
<mx:Panel>
width="100%" height="100%"
</mx:Panel>
Coming from C++ and Java, I am intrigued by the option of setting something to "95%" and let the library work out the details, instead of having to write many lines of code, just so my text-area always keeps a 5 pixel distance from the border, but scales with window width.If there is no easier way to do it than figuring out pixel sizes by hand and setting the coordinates.
I compile my Flex application with several swc's (libraries) and it creates a swf file. The sum of the swc's is roughly 4 MB yet the actual swf generated is only 1.6 MB. How is this possible?
View 3 RepliesI am using Flex Builder 3. Even for a small project, my exported .air file's size is around 400k. Is it because of all the Flex libraries being compiled into my application. I wanted to know if it is possible to remove the libraries that I don't use.
What are libraries like "qtp.swc" and the "automation" libraries?
How can I hide (visible=false) a component and what AS3 code to use to hide a Flex Component from an external swf file?I have found out this doc, but I have no idea on how to implement it:
View 1 Repliesi am doing a project and i am loading .swf files in a FLEX 3 SWFLoader. i made a HSlider as a seeker to control the .swf file (forward and backword); BUT... if the swf file has sound and i drag the seeker forward or back word the sound does not effect i want to control the sound as i control the swf file note:: the sound is in the .swf file not loaded
View 1 RepliesI have an AIR application, I use SwfLoader to load another swf file to display in this app. The problem is the CPU Usage always takes over 50%, but it only takes 15% when the swf file runs in standalone mode.
View 1 RepliesHow can i play youtube video using SWFLoader?
Currently, i can play only 1 video at a time (suppose its name is A), if i try to play video B it doesnt play it. but if again i play vidoe A, it works.
I'm using Flex Builder 3 to build what will be a fairly large project. I'm suffering from modules stepping on each other and a conflict between application/module. My structure looks something like the following:
[Code]...
I have a flex application that's compiled with flex 4.1.I want that flex application to load an swf that contains the variable score and i want to be able to modify this variable.I wrote two versions of swf, one compiled with as2 code and the other with as3. this is my flex application:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"[code]......
I am using SWFLoader to load a swf file. The code is below:[code]
View 2 RepliesI'm trying to load windowed sub-application in another windowed application, The requirement is to replace one loaded application with another on user action.
I tried the documented method of unloadAndStop() on the swfLoader in the main windowed application, but somehow during memory profiling I could see the instances of those applications were maintained in the memory even after explicitly running garbage collection.
Where as If I make those windowed application as modules, and then try to load them using the Moduleloader things work smoothly and unloaded modules are removed from memory.
I am trying to scale a swf that has been loaded via a swfloader. When I get the complete event or the init event the dimensions of the swfloader are still zero. I don't see a value in the dimensions until I do a resize of the browser window. The swf is just an animation. Trying to resize the actual swf content gives inconsistent results.
View 1 Replies