Flex :: Frames - Replaces The Top Level URL In The Browser Address Box With The URL
Jun 1, 2010
in my flex .swf file I check for "#/1" at the end of the URL in the browser address box (and if its present, use a local Flex SharedObject to restore a previous state). if "#/1" is not present, I call SWFAddress.setValue("1") which has the effect of appending "#/1" on the end of the URL in the browser address box, if that top level URL is also the url of the html page containing my .swf file.
My problem occurs when the html file containing the swf is in a frame, in which case calling SWFAddress.setValue("1") replaces the top level URL in the browser address box with the URL of this frame page (and then appends the "#/1" on the end of that), which then makes this frame page the top level, wiping out all the other frames. But I just want to append "#/1" on the end of whichever top level url address happens to be in the browser address box (not replace its entire content with the url of the frame page containing the swf.
View 1 Replies
Similar Posts:
Jul 23, 2009
I can find tons of articles/tutorials on custom scrollers but none of them actually replace the browser scroller. If the browser is made smaller the custom scroller and the browser scroller are there. [URL]...
View 1 Replies
Dec 8, 2009
through as3 how we can retive string of address bar in as3 ??
View 1 Replies
Feb 16, 2010
I'm looking at some requirements for an upcoming flash project. One requirement is for the browser url in the address bar to change as a user clicks around in the flash movie so that a user might copy/paste said address into an email and another visitor will be brought to the same location. Is this possible?
View 5 Replies
Jul 4, 2011
I have created a very dynamic application but realised that if the Browser zoom level is not set to 100% the dynamic positioning of objects are misplaced. some Flash AS3 JavaScript function to reset the Browser Zoom level to 100% every time user click on button?
What I am basically doing is loading external objects into emty movieclips, these are positioned according to the stage width and height. As a test I created a textfield to display the stage width. When I zoom in and click on the buttons (loading new content) the displayed stage width stays the same.
View 1 Replies
Nov 16, 2009
If you put a carriage return (13) newline (10) sequence into a TextArea, it is automatically converted in the TextArea to two carriage returns. (Did we know this?)
I'm using AS3 as the front end to an Oracle DB (communicating via ASP), and check fields to see if they've been edited (i.e., no longer match what's in the DB and need to be saved). TextAreas assigned the CR-NL sequence inherently never match.
Work Around: After I write variable text from the DB to the TextArea, I write the TextArea.text back into the variable.
View 2 Replies
Oct 6, 2011
so,im trying to make a button that replaces a movie clip.Basicly when you press on a button it replaces a movie clip that lets say i called ˝movie_1˝ that is already on the stage with a movie clip in the library i called ˝movie_2Both movie clip have this already as an action onClipEvent(enterFrame){ mouse.hide(); this._x=_root._xmouse; this._y=_root._ymouse; }
View 1 Replies
Mar 21, 2012
Replace all instances of a phrase in a text string with another phrase... for some reason only the first instance is replaced and the rest ignored. I botched a solution together by running it through the string replace function around 9 times so the end result has all the <br /> replaced but I'd like to know what I've done wrong...
My Code:
var importPostAddress = "123 Fake Street<br />Mytown<br />Mycounty<br />Mycountry<br />PO5 7CD<br /><br />";
var postAddress = importPostAddress.replace("<br />",", ");
Expected result when tracing postAddress
123 Fake Street, Mytown, Mycounty, Mycountry, PO5 7CD, ,
Actual result
123 Fake Street, Mytown<br />Mycounty<br />Mycountry<br />PO5 7CD<br /><br />
View 2 Replies
Jan 30, 2004
I have a function which adds movieclips dynamically into another movieclip. Inside the dynamic movieclip is a dynamic textbox (it gets it's content from a textfile via the function).However, if I add more than one movieclip, the previous added mc's gets the textbox value undefined (doesn't matter if it's an identical mc or a different one). And it hasn't got to do with levels, I've already checked that...
Here's the function:
[AS]
addTxt = function (src, objWidth, xpos, ypos, level) {
[code].....
View 3 Replies
Jan 30, 2004
I have a function which adds movieclips dynamically into another movieclip. Inside the dynamic movieclip is a dynamic textbox (it gets it's content from a textfile via the function).
However, if I add more than one movieclip, the previous added mc's gets the textbox value undefined (doesn't matter if it's an identical mc or a different one). And it hasn't got to do with levels, I've already checked that...
Here's the function:
[AS]
addTxt = function (src, objWidth, xpos, ypos, level) {
text_lv = new LoadVars();
text_lv.onLoad = function(success) {
[code]....
the function is called by an "XML-loop", and the level-var is changed for each mc that is to be created.
View 3 Replies
Jul 14, 2009
how to get your logo to appear next to the address of your web site when your website address is typed in,
for example if you look at the website address at the top of the screen you see (logo) [URL]
View 1 Replies
Aug 4, 2009
I'm attempting to make a Textfield that is a fixed size and that replaces the overflow text that an ellipse (...). Has anyone found any clever ways to do this?
View 6 Replies
Jan 12, 2011
How do I get the IP address of a certain website using Flex 4 via an AIR application? I know that this is do-able using ping but how can I replicate the same only this time, using AS3 in Flex 4 and as an AIR application.
View 1 Replies
May 25, 2011
I need to find the IP Address of the system my AIR App is running. I found a similar question here. But the solution is with SDK version higher than 3.5 it seems. Can this be done using Flex 3?
View 3 Replies
Apr 22, 2011
im trying to create a level select screen so the buttons unlock as you complete a level, so far i have this on each button:
on(release){
if(this.number <= currentItem){
gotoAndPlay(3);
}
}
[Code]...
View 0 Replies
Aug 31, 2009
In a flex tileList, is there a way to get the cell-address of a given item? i.e. for a given item, get the row/column location for that item in the list.
View 1 Replies
Aug 26, 2010
I am searching for a way to retrieve all emails addresses from a given string. For example: if i have the string "AB CD [ABCD@gmail.com]" i want to receive only "ABCD@gmail.com".
I guess i should use RegExp and String match function, but i am not sure how.
View 2 Replies
Jan 12, 2011
I would like to get the user's IP locally without any invoking any service.
View 1 Replies
Mar 27, 2012
I'm trying to come up with the optimal solution for validating IP addresses in Adobe Flex. My current solution is to use a regexp validator and look for dotted quad numbers, see code below. For some reason this will also allow an address like "1.2.3.4.5".
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="[URL]"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
<fx:Script>
[Code] .....
View 2 Replies
Aug 26, 2010
I have two layers in my FLA both with empty movie clips as follows:In mc_Empty1, I attach a faded background movieclip as I wait for mc_Empty2 to load a SWF. Once the SWF is loaded into mc_Empty2, I want to remove the faded background movieclip from mc_Empty1. When I load the SWF from the main timeline, the onLoad() function works and removes the faded background from mc_Empty1. However, when I load the SWF from mc_target, the SWF loads, but the onLoad() function does not. Here's my AS2 code:
//Loading SWF from main timeline
mc_Empty1.attachMovie("mcFadedBg", "mc_FadedBg", 1);
mc_Empty2.loadMovie("My.swf");mc_Empty2.onLoad = function():Void{ trace("loaded"); //This works removeMovieClip(mc_Empty1.mc_FadedBg); //This works}
[code]....
I know I'm targeting properly because the SWF loads as it should, but the onLoad() function does not.
View 3 Replies
Oct 2, 2010
This is making me a little kooky today. I thought I could defined a library path in PREFERENCES > ACTIONSCRIPT > ACTIONSCRIPT 3.0 SETTINGS then that library would be available to all AS3 FLA files, but that doesn't seem to work for me. If I use the PUBLISH SETTINGS and define the library path everything is fine.
Is there something that I could have done to disable the application level class path functionality? I guess I'm trying avoid having to set the library path for every new FLA I'm making.
View 1 Replies
Aug 6, 2009
I am working on a grid example in flex using advanced grid control. I know we can easily group data by specifying the field name. At the group node level, other than the gorup name I want to be able to show data in the rest of the cells ( calculated data ) and I am looking for some dataRowBound event or similar to be able to hook some data in it.
Example: Grid displaying list of towns grouped by state. At the group level ( for each state) I want to show the total number of towns in each state. Here how can i show the total number in the town column.
View 1 Replies
Dec 18, 2009
in other words, suppose I want to send data, like text, programmatically from a Windows app (such as a browser plugin) to a Flash app running in the browser. Well, conceptually, an example of this might be a Flash instant messenger with a textbox and button "Send"; so let's say I want to be able to programmatically paste the text and press Send or otherwise activate it. That's NOT what I am trying to do here in reality (i.e., no,I am not trying to spam other people's chat rooms or anything)but just an illustration of a similar situation.I can include in it whatever widget or hack that may be necessary.The reason why this problem is arising for me is that AFAIK the SDK that is providing me the data I want cannot be directly accessed from Flash, so I need a way to pipe the data from a regular app into Flash. can I have the Flash app interact with other apps through localhost IP? Or are there draconian restrictions on which server Flash in browser can and cannot interact?
View 1 Replies
May 20, 2010
I have an issue in flex which is causing a bit of a headache!
I am adding objects to an ArrayCollection but in doing so, another ArrayCollection is also picking up these changes even though there is no binding occurring.
I can see from the debug that the two ACs have the same address but for the life of me can't figure out why.
I have two Array Collections:
model.index.rows //The main array collection
model.index.holdRows //The array collection that imitates the above
This phantom data binding occurs only for the first iteration in the loop and for all others it will just write it the once.
The reason this is proving troublesome is that it creates duplicate entries in my datagrid.
public override function handleMessage(message:IMessage):void
{
super.handleMessage(message);
[Code]....
View 2 Replies
Jun 1, 2010
I'm working on file transfer application where client sends files to cpp server. At client side I can give the server's domain name but not IP address cuz it may vary. How can I get my server's IP address through it's domain name. I have to put this logic into air application.
View 1 Replies
Jul 29, 2010
i want to read MAC address of machine from Adobe AIR. I am using flex 3 and AIR 2.how can i do thisthe main purpose is i want to install that product in only one machine
View 3 Replies
Apr 20, 2011
when a marker is drag on google map we can get the latlong right.But i wanna get the location name whenever i drag the marker,
View 1 Replies
Jul 28, 2011
I want to truncate address line 2 to 10 characters if a value greater than 10 characters is returned in the address validation response for address line 2. we also have address line 1 which is set to max of 40 characters, if address line 1 exceeds 40 characters and the result comes to address line 2,and if the length for address line 2 reaches more than 10 characters then i need to truncate that to 10 characters.
View 1 Replies
Jan 11, 2012
I am using swfAddress 2.4 for browser navigation and everything (back and forth button in the browser) works fine as long as I stay in my flash website, but when I use back button eventually to go out of the website and then use the forth button to come back , it just takes me to the home page of my website, instead of the last page I was in my website before I hit the back button. it looks like I loose the history of my pages as soon as I go out of my flash application.
how can I make the browser navigation with swfAddress works when I go out of my flash application and want to comeback to that? and still have the history of my pages.
View 1 Replies
Oct 27, 2010
The title essentially is the question, how do I open the .swf without the browser's control bar junk? and maximize the window?
View 2 Replies
