Is there a way to dispatch an event after Flex loads an mx:image? I'm loading image externally and don't know the width/height until it's loaded. I get an exception when I call width/height to the image before loading.
View 2 RepliesI am getting a mysterious result when trying to load profile images from a logged in Facebook user's friends list into an as3 canvas app. In pretty much every (non-facebook) application I've made where loading an image is required I use the following:
private function loadPic():void
{
var url:String = Facebook.getImageUrl(_friendslistObjectArray[_loadCount].id);
_picLoader = new Loader();[code]............
I can't retrieve the image from the event object,and I am given no error at all.It all just fails silently.If I remove the line var image = evt.target.content, the process runs through the whole array.I can't think of any reason this would occur. Furthermore, if I look in firebug's net activity, I see I see the images get loaded as long as I do not have the line I just mentioned included. I just can't seem to get the image data from the event object to add it to stage or a container movieclip.
I have imported 5 images to my mc using "for loop" and have add an event listener for loading complete. I can able to know, in which movie clip it is complete. the code is below:
Code:
for (var a:Number=0; a<arr.length; a++) {
var tmc:MovieClip=new MovieClip();
thumbMc.addChild(tmc);[code]....
Now I need to know is, the name of the image which is loaded for each and every loading.
I have encountered a bitmap problem while embeding my image into my project. Since event listeners don't work on Bitmaps I am having troubles on what to do next so I can use event listeners on my image. Main Class - The section that adds the image in the class:
[Code]...
I developing a site where on the homepage, there are about 6 images that rotate, but if you click on a sub link, a different image loads. But the problem is that, the first image has to cycle through before the second image loads. I want the second image to load immediately.
[Code]....
[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.
View 3 RepliesI'm new to as3 but I have a project where 9 buttons call 9 external swfs to the stage into a container. However, I want to have the "movie01.swf" play when the main swf is loaded. I don't know how to get "movie01.swf" to play only once.I figure i need to remove the eventListener but I know what I have below is wrong. (only button01 is included here so you have an idea of what I'm doing).
Code: Select all
container.addEventListener(Event.ENTER_FRAME, loadmc);
function loadmc(e) {
[code].....
is there an event listener that triggers only once when the movie loads?If not how can I simulate this?
View 4 RepliesI am changing image through flex every time i change it saved into server directory with same name(which i am referring to show). So when i refresh my page my browser didn't send new request to server since it's already in request.so didn't getting new image.Tip:- when i clear browser history it will come with new image
View 2 RepliesHow would I make an image I load using AS3's loader class into a button with an event handler on it? Below is what I have started. And below that is my error I get when I click the message.
AS:
//call function that starts loading my image
callButtons();
function callButtons():void {
[code]....
the error I am getting when I click the spanish.png on the stage is: ArgumentError: Error #1063: Argument count mismatch on MyVideoPlayer_CS4_fla::MainTimeline/playSpanish(). Expected 0, got 1.I NEEDED TO ADDED evt:MouseEvent
Is there a way to make the transparent area from an png image not to register when I add with a mouse event to that image? What is happening is the rectangle around the symbol is effected by the mouse event.
View 2 Repliesi want to rotate 3D an Image called img1 in Flex. I want to rotate it around y axis 180 degree. I can do this by using 3D effect already built in Flex but i want to do a bit more different. I want during rotating, there's another image called img2 appear on back of img1 (in default case, the image appear on the back is img1) and when rotating finish, the image will be img2.
View 2 RepliesCan i create img map and then add several click event?for example this imgI have 4 area for event top-left, top-right etc.
View 2 RepliesI'm currently working on this website (http:uel...) and I created a little gallery. When you press the image it becomes the background of the website. Now this has some problems if the background is white and you look at the other pages again, you can't read the text any more.I would like it to be when you go back to another page, the background changes to it's original one. So basically I'm looking for the page (component?) load event or something alike, but I can't seem to find it.
CreationCompleted doesn't work for this, because when you navigate to it the second time it's already created, this the background doesn't change.I'm setting the background like this:
Main page:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark" [code]....
I also have the problem that the images become stretched, because I can't set the fillmode NOR can I center them,
1) if I create items in a for loop, is correct to add a new eventListener for each item ? Or should I add only 1 eventListener to the parent ? and call the event through ID ? 2) if I want to scale my item, (a LinkButton with icon image), I noticed that the icon is sometimes resized with delay, so I have a bit of flickering when I trigger the event. Should I not use icons, and set the image in another way ? How can I fix this?
View 1 RepliesCore of my code is following:
var img:Image = new Image;
img.source = 'http://..........';
img.autoLoad = true;
[Code]....
I found that, the complete event does not occur for some images. How can I catch complete event without signal leaks?
I am creating one desktop application of facebook.
So here I am getting streams from facebook post. So when any facebook application's long image link I am getting that I can't display in Image container, this is not displaying image.
One also fact is that, When I am giving this link directly then it is working.....
When I have seen this in Charlse Debugging proxy then it is displaying 403,Forbidden error of image.
set some filters on the bitmap after it has been loaded.During development (Debug mode), everything worked and the even has been fired just fine.But now I switched to Release mode and the complete event doesn't fire anymore.To load the image, I set the source property of the image to an URL that points to a PNG image. That does still work in release mode, so the image appears correctly.It's just that the "complete" event doesn't fire, no matter what I try.
View 1 RepliesFor some reason the squares of color that are supposed to load behind the image that acts as a mask load first, momentarily showing while the image loads, which looks bad. Hre is the code:
[Code]....
I have experimented with adding the square child elsewhere (such as in the code where it is created twice), but that proves even more disastrous.
I've having an annoying browser issue and wondering if anyone can shed some light. I'm working on an flv player that displays 3 different kinds of 'mid-roll' ads: text, image or video. I got the text and video working (still needs some tweaks but essentially it's working) and thought the image ads were working as well but when I tried testing on my server it's working in fine in IE but in firefox the image doesn't load and seems isn't even called.Here's the code to load the image:
ActionScript Code:
if (ads[nextAd].type == 'image') {
var container_ref:MovieClip = mcVideoPlayer.createEmptyMovieClip("container_clip",
[code]....
Ok this isn't as much of a flash issue but I can't figure out why the page loads this way. For those that can't see the image when myspace loads it automatically has the typing indicator on the search bar so if one of my friends trys to use my cmd prompt he types something in it searches on mysace. The only way around this is to click in the grey area / off the search bar then click the input box to begin typing. I'm wondering if there is a way if you guys know the where my flash input box gets priority over the typing indicator blinky thing.
View 1 RepliesprintableInvoice.addEventListener(batchGenerated, printableInvoice_batchGeneratedHandler);Results in this error: 1120: Access of undefined property batchGenerated. I have tried it as FlexEvent.batchGenerated and FlashEvent.batchGenerated.
The MetaData and function that dispatches the even in the component printableInvoice is all right. It I instantiate printableInvoice as an mxml component instead of via action-script it well let put a tag into the mxml line: batchGenerated="someFunction()
I am a php programmer who has no experience whatsoever with flash. I've got a swf on my website that calls an image. The images it calls can take a few seconds to load and I would like to display something in the meantime to let the visitor know that the site is working.[code]I've done some Googling and I think it is something to do with LoadListener. Am I right in thinking that this "self monitors" the process and that you can use this to display something in lieu of the actual swf loading??
View 10 RepliesI'm creating a movie where I need to have several copies of the same external image.It seems that when viewing the movie in Firefox the external image is downloaded only once regardless of the number of copies I make, which seems correct.In IE the external image is downloaded once each time I copy it within the movie.And that just doesn't seem right.(I've upgraded both IE and FF to Flash Player 10.)For testing purposes I've written the following code
Code:
var pages = new Array();
pages[0] = "images/Page_01.jpg";
[code].....
Im creating a portfolio, and one of the "pages" is a xml gallery. What is happening is that when the gallery is loaded over the menu, the area where the gallery covered the menu button are disabled even when I load, for example the "contacts"page... it remains only a really small clicable area over the buttons... heres the website in case you wanna check out (the website is fluid so be sure to resize the window so the gallery covers some part of the buttons):
[URL]
I've got a dynamic text field [var = NameLast] that is given a value when I an ASP page to call the database. When NameLast is equal to a certain value, I would like it to call a function that loads an image.I'm sure this is simple, but I can't seem to get it to work. Here's my code:
if (NameLast="Smith") {
_root.createEmptyMovieClip("container",2);
loadMovie("mag1.jpg","container");[code]....
I'm making a flv movie with dynamically loaded cuepoints (from xml).On every cuepoint there should fade in an image (jpg) . The path to this image is sent with the cuepoints.To be sure an image is loaded before the cuepoint is passed, i've created a preloader that preloads 4 image from the xml before even starting the video.After the video is started the preloader preloads the remaining images in the background.All works well expect for 1 thing:Flash does not seem to cache my preloaded images. In the bandwidthprofiler i can see that when a cuepoint passes, flash loads the preloaded images again. why does flash reload the image while it is already preloaded?[code]
View 3 Repliesi'm trying to make a class that loads an image easily for me, and runs a callback function when its loaded.
I'm not sure if it would make sense to use a static function for this or create an instance of the class, I did it both ways. I'm wondering what ways better or if theres an even better way to do it.
LoaderPro:
Code:
package com.farzher {
import flash.display.Loader;
import flash.events.Event;
[Code].....
They both work but i'm not sure if LoaderPro could get garbage collected before it loads the image, doing something like this without referencing it in a variable.
Code:
new LoaderPro(xml.image[0].src, sup);
Is it possible to get a loader to load and display a random image?My background images are quite large so I would prefer to use a loader to keep the file size down but I'm struggling to work out how to randomise the images.
View 2 RepliesI'm working on this flash project which loads an external image via XML, the problem is the image resolution is a whooping 11472x6000! I think flash wont allow you to render greater than 4000px(correct me if I'm wrong), Is there any solution for this?
View 7 Replies