I developing a site where on the homepage, there are about 6 images that rotate, but if you click on a sub link, a different image loads. But the problem is that, the first image has to cycle through before the second image loads. I want the second image to load immediately.
[Code]....
[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.
View 3 RepliesI am a php programmer who has no experience whatsoever with flash. I've got a swf on my website that calls an image. The images it calls can take a few seconds to load and I would like to display something in the meantime to let the visitor know that the site is working.[code]I've done some Googling and I think it is something to do with LoadListener. Am I right in thinking that this "self monitors" the process and that you can use this to display something in lieu of the actual swf loading??
View 10 RepliesI am trying to load multiple images into a scene and then cycle through the images one at a time.So, here are the essentials what I've put together in AS3:First I set up a counter and a Loader
[code]....
Then, after loading a list of images from an XML file, I call a function that I called "createImages". This function then takes the list of images and creates a bunch of loaders:
[code]....
So far, so good! I now have a bunch of loaders each with a different name "img1","img2","img3" etc.
I am getting a mysterious result when trying to load profile images from a logged in Facebook user's friends list into an as3 canvas app. In pretty much every (non-facebook) application I've made where loading an image is required I use the following:
private function loadPic():void
{
var url:String = Facebook.getImageUrl(_friendslistObjectArray[_loadCount].id);
_picLoader = new Loader();[code]............
I can't retrieve the image from the event object,and I am given no error at all.It all just fails silently.If I remove the line var image = evt.target.content, the process runs through the whole array.I can't think of any reason this would occur. Furthermore, if I look in firebug's net activity, I see I see the images get loaded as long as I do not have the line I just mentioned included. I just can't seem to get the image data from the event object to add it to stage or a container movieclip.
Is there a way to dispatch an event after Flex loads an mx:image? I'm loading image externally and don't know the width/height until it's loaded. I get an exception when I call width/height to the image before loading.
View 2 RepliesI am trying to change the images the following calls up. (Using CS4 and AS 2.0)
onClipEvent (load)
{
imageProperties = _root.getCurrentImageName(0);
loadMovie(_root.url + imageProperties.name, this.cont.pic);
[code]....
I get that I could find the image in the directory and just change it out with the same name/pixel size, but I'd also like to add more images to this particular project with the same conditions.
I am trying to change the images the following calls up. (Using CS4 and AS 2.0)[code]Where is the getCurrentImageName calling the image up from? or..Where is the imageProperties.link ToOpen pointing to?Honestly, I get that I could find the image in the directory and just change it out with the same name/pixel size, but I'd also like to add more images to this particular project with the same conditions.I'm probably one of those girls that knows enough to cause more damage than good, so at least point me in the right direction.
View 1 RepliesI'm a flash newbie and I am trying to change the images the following calls up. (Using CS4 and AS 2.0)
onClipEvent (load)
{
imageProperties = _root.getCurrentImageName(0);
[code].....
I am loading images of different size and then images are scaled and border is drawn for each image as shown in below link,[URL]... I want that border of images to be of the same width and height and for that I need to find out the max width and height size image before loading all the images. Is there any way that I can know the width and height of an image before loading it completely?
View 1 Replies[URL]
But I wanted to make mine cycle through each image every 2 or 3 seconds
I am a newbie in flash and action script. I have a AS2 code which fetches the images and their URLs from a XML file and shows all of those images.I need to append my own images in those images however from the script itself therefore from Flash. I don't want to add that image in the XML.
View 5 Repliesi was creating my portfolio using xml gallery script from this site. the thing is that it loads one picture at a the with a preloader between each load. is there a way to load the first image and keep loading the rest so there will be only one loading time? here is my action script:
[Code]....
I am a php programmer who has no experience whatsoever with flash. I've got a swf on my website that calls an image. The images it calls can take a few seconds to load and I would like to display something in the meantime to let the visitor know that the site is working.
Here is the start of my script:
stop();
var min_p = 0;
var max_p = 0;
[code]...
I've done some Googling and I think it is something to do with LoadListener. Am I right in thinking that this "self monitors" the process and that you can use this to display something in lieu of the actual swf loading?
I have followed Kirupa's XML Image Gallery tutorial. Before you ask, I have double checked my code. When I hit command+enter (mac) to preview it, everything works just fine. XML loads the correct images. My problem is when I publish it and upload it via FTP to my web server, ONLY the first image displays. When I click the next button, the first image fades out, but then it fades back in. The captions and image numbers change (like they're supposed to), but the image does not.
It remains on the first image. I know that it is able to access the XML because it loads the first image specified in the XML. That image was never imported into the Flash document. I have double checked my paths, too. All of the paths are correct. Also, I'm sure that it's not accessing a local file, because for each path, I specify the full URL, such as "[URL]", rather than just "/images/image.jpg". What do I need to do to fix this? You can see what I'm talking about by going to [URL] and clicking on "photo+art".
I am building a website with an image gallery using XML to load thumbnails and images.
Firstly, I was going to try to make the thumbnails act like buttons, so the mouse cursor would change to a little pointing finger like it does in buttonmode but i could not get this to work.
Secondly, I also wanted the alpha properties of the other buttons to reduce to about 0.75 to highlight the selected thumnail that would stay at its full alpha value of 1. Yet again i could not get this to work either.Can you build this type of functionality into the imported xml data or am I just kidding myself here?
I'm loading in a bunch of images with a for loop. The images do appear on stage so that part works, however, spacing them is the problem. this is what the following code traces out:
[Code]...
[code]Whenever im preloading images, i get a NaN Error everytime. Sometimes all i see is a NaN error, not even load numbers like 89% or so. I got the swf online at url...If you go to any section in the designs menu (3d design, 2d design or webdesign) and click a image you get the script that gives the NaN.I only get NaN in Firefox, Internet Explorer just gives 0. But either way i would like to see percentages rather than 0 or NaN.
View 1 Replies[URL] Above is a link to view the project I'm working on. Once the site loads if you go to the "Contact Us" page the content doesn't load correctly. I'm using an extrnal .xml and .css files for the content. I'm also embedding the fonts dynamicly. If I test the file locally on my computer is works fine the image loads as it's supposed to and content looks correct. However when I post the files to the server (which work exactly the same way) I get the white box when you can see from the link above. I'm at a complete loss as to how to to fix this.
View 3 RepliesI have a read a few ways to animate an image in AS3 and not sure what is the most efficient way.I want to load 4 images(in 4 files) in a class. Each image is a different frame of a walking movement of a character. What I want to do is load all the images in the constructor and assign the sprite the current frame to display.eg sprite=bitmap1 then after some time swap images sosprite=bitmap2 then after some time swap images so etcsprite=bitmap3....Is this the logic you do in AS3?The code loads 1 image so I can change this to 4 images to load (4 bitmaps and 1 sprite for the current frame?)
[code]...
I'm using the code contains onClipEvent(load) and onClipEvent(enterFrame) and duplicateMovieClip() to make the snowing effect in the 2 first movie-clips but then, i cannot stop them in the next movie-clips. (All of my movie-clips in 1 scene only.)
View 1 RepliesI load data from xml and want a list of thumbnails with text to be lined up. A handful of text-attributes to the xml-rows, including a src-attribute, which links to an image, goes through as wanted - text is shown, and images are shown. The image order, however, varies when I have more than two rows and is completely wrong. The text-attribute-order to each thumbnail remains perfect in all scenarios.The images bitmapData is taken etc., and the images are scaled to a proper thumbnail size. This might be where something goes wrong?
ActionScript Code:
function xmlLoaded(e:Event):void
{
[code]....
Is it possible to capture the image loading event like when the image is fully loaded and such when it is assigned to the htmlText of the textFiel???
I have a scrollPane that contains a textField which is loading an image via img tag where there is no scrollbars initially because the textField is not large enough in the beginning, but it is larger than the scrollPane after the image is fully loaded.. and I am trying to update the scrollPane once the image is fully loaded..
I am trying to load a colour image and then it is changed to black and white image. Here I am using a mask. But it is not getting worked. The code that i am using for this purpose is attached following: import
[Code]...
I have an application that I'm migrating from flex 3 to flex 4.5. In this application, there is some mx Image components that load a simple swf file (image). Spark image doesn't load swf files, so I was wondering, should I keep the mx Image, or should I change it to SWFLoader? Is there any advantages to using one or the other?
View 1 RepliesWhat would you use to create buttons which when pressed load an image in an image area within the same flash document?
View 1 RepliesThis shouldn't be too difficult, but what I have is a button, which in the 'over' state I want to load an external image, and then have the image disappear when the users mouse hovers off the button
View 2 RepliesI'm creating a moodboard application where the user can dynamically load an image onto the stage by pressing a thumb of the image in a menu item. I have most of that working but what I would like to know is that, if there is a way the user can interactively scale/transform the image when it is on the stage in the swf file?
View 2 Replieshow can I load in flex spark Image control and wait for complete loading? MX:image have method load() and listen COMPLETE event this is not in spark Image...is there only source?? or how can i listen when image is complete loading??
View 1 RepliesI need to create a gallery to load images and display them. This part is fine:
/**
* @variable image_name to store the name of the selected item
*/
private function showimage(evt:Event):void
[Code].....
where imgMain is the id the image component.
But, I need a small twist. A transition image i.e. loading image should be displayed while the the image is being loaded.