I am a newbie in flash and action script. I have a AS2 code which fetches the images and their URLs from a XML file and shows all of those images.I need to append my own images in those images however from the script itself therefore from Flash. I don't want to add that image in the XML.
View 5 RepliesI recently had to tell a client that I didn't want to work on their project because I was unclear about something. When you append a recording from a stream does the metadata get updated correctly after the append? I've worked with metadata before and from my recolection anytime a .flv was changed I had to manually update the metadata.
View 1 RepliesI developing a site where on the homepage, there are about 6 images that rotate, but if you click on a sub link, a different image loads. But the problem is that, the first image has to cycle through before the second image loads. I want the second image to load immediately.
[Code]....
I am loading images of different size and then images are scaled and border is drawn for each image as shown in below link,[URL]... I want that border of images to be of the same width and height and for that I need to find out the max width and height size image before loading all the images. Is there any way that I can know the width and height of an image before loading it completely?
View 1 RepliesI'm using Flash CS3 Actionscript 2. I'm loading an external file (it used to be an XML file but now it is an aspx file). Anyway, my actionscript for loading the file looks like this:
xmlFile = "flash/info.aspx?id=1"
Which works great with the aspx file I've created. But I need the "id=1" to append a dynamic number instead of the "1".
I have followed Kirupa's XML Image Gallery tutorial. Before you ask, I have double checked my code. When I hit command+enter (mac) to preview it, everything works just fine. XML loads the correct images. My problem is when I publish it and upload it via FTP to my web server, ONLY the first image displays. When I click the next button, the first image fades out, but then it fades back in. The captions and image numbers change (like they're supposed to), but the image does not.
It remains on the first image. I know that it is able to access the XML because it loads the first image specified in the XML. That image was never imported into the Flash document. I have double checked my paths, too. All of the paths are correct. Also, I'm sure that it's not accessing a local file, because for each path, I specify the full URL, such as "[URL]", rather than just "/images/image.jpg". What do I need to do to fix this? You can see what I'm talking about by going to [URL] and clicking on "photo+art".
[code]Whenever im preloading images, i get a NaN Error everytime. Sometimes all i see is a NaN error, not even load numbers like 89% or so. I got the swf online at url...If you go to any section in the designs menu (3d design, 2d design or webdesign) and click a image you get the script that gives the NaN.I only get NaN in Firefox, Internet Explorer just gives 0. But either way i would like to see percentages rather than 0 or NaN.
View 1 RepliesI load data from xml and want a list of thumbnails with text to be lined up. A handful of text-attributes to the xml-rows, including a src-attribute, which links to an image, goes through as wanted - text is shown, and images are shown. The image order, however, varies when I have more than two rows and is completely wrong. The text-attribute-order to each thumbnail remains perfect in all scenarios.The images bitmapData is taken etc., and the images are scaled to a proper thumbnail size. This might be where something goes wrong?
ActionScript Code:
function xmlLoaded(e:Event):void
{
[code]....
Explaination: MX 04' Pro Thumbnail Nav. loading images with XML Loader resizes and displays images when users click on Nav. reading XML Problem: Users click Thumbnail Nav. first image gets loaded and loader resizes to image. However the next choice by user on thumbnail click, the second image doesnt get resized in the loader. It goes beyond holder. Here is my code for Thumbnail and Loader:
[Code]....
Now the first image loads fine and the loader sizes to file from XML. However, when users click second choice from Thumbail the loader doesnt resize to new image size. It only gets resized on the first selction or if users click the next or prev. buttons then the images fade correctly but nothing fades back in. Now if they do hit next or prev and then hit a thumbnail option it loads and resizes.
im loading multiple images but how do I make sure the program will start once all images have dispatched a complete event. like make a universal loader for all the other "small loaders" if you understand.
View 1 RepliesI am pulling external images, I have my main image, and five small images, I have that to make the small images when click to appear in the place of the main image, but I am not obtaining to make they to click, I am placing my archive who to want to make download
View 2 RepliesThis is my first post as i m just beginner in Flash JavaScript. I want to prepare a FLash Movie in which all the images r dynamic and the images should change after a time say every 30 secs the image changes.
View 1 RepliesI need to load dynamically a few images (4-6) so that by clicking on particular image user would invoke particular action. Embedding images solves the problem but at the expense of file size. If I load them dynamically, they lose their ID.
<comps:ExercisesScroller id="scroller" x="300" y="100"
ex1="@Embed(source='assets/Exerc_1.png')"
ex2="@Embed(source='assets/Exerc_2.png')"/>
and so forth this works. But instantiated in CDATA it does not work:
import components.ExercisesSCroller;
private var custScroller:ExercisesScroller;
private function init():void {
[Code].....
I've tried a lot of online tutorials for photogalleries but can't find what I'm looking for.I need to bring in my images from xml so that they will fill the thumbnails (if the width of the image is greater than its height then it will scale to the height of the thumbnail) and center within that thumbnail.
Then, when I click on a thumbnail, I need that image to fill the space allowed for the large photo (this time if the width of the image is greater than its height then it will scale to the width of the photo space)and center within that space again.In terms if centering the image,I have created movie clips for both the thumbnail and the large photo space (let's call them "imageHolder")and within those movieclips there is an empty movie clip called "image" which is aligned to the centre of "imageHolder". I thought that this would work:
imageHolder.image._x = 0-(imageHolder.image._width/2);
imageHolder.image._y = 0-(imageHolder.image._height/2);
But no such luck.
As for resizing the images to fit the image holders,
I have typical situation where big loop is loading lots of images and its done asynchronous which make browser to frees during loading and I want to make it synchronous but having big trouble doing it. I found this class synchronous loader and it work great but you cant add mouse event listener to loader. Here is sample code:
[Code]...
I want to have an AS3 app load images from url supplied by the user. But I don't want a malicious user to be able to load an SWF file in place of the image, such as with an altered extension "maliciousSwf.png". Well, not sure how big a security threat that is above and beyond the ability of the hacker to decompile swf, but I think that ideally such behavior should not be allowed.
So, is there any way to prevent this? When people allow users to load images in their Flash apps, do they somehow guard against loading of SWF? Or is this really absolutely no big deal?
How would you defer loading of other graphics on the page until after the images in a Flash gallery's images.xml file are finished loading?Is there any way to detect for this, or would I only be able to check if the flash swf object is finished loading? I'm pretty sure the swf object would be loaded/ready as with document.getElementById('flashobject').onload = function(){}; before the corresponding images have loaded though, instead of after.
View 1 Replieshere is some code for a rotating crank that controls an image gallery. refer to the "image viewer stops?" thread in the flash mx forum (sorry don't know how to link to a forum yet!) for more info. attached is the fla. i want to be able to crank clockwise to scroll images forward and counterclockwise to scroll images backwards. If i keep cranking, i want the images to continue to change, if i stop cranking, i want it to stp on that image. it doesn't sem tooooo hard, i'm just numb from tryig to figure it out.
[Code]...
[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.
View 3 RepliesI tried searching for an answer to this on the forums and it seems you can't duplicate a movieclip that has a dynamically loaded jpg in it, I mean you just get a duplicate empty movieclip?What I want to do is have 3 copies of a pic, each tinted a little differently, and have them converge and reveal the "composite" of this pic. Do I then have to use loadMovie 3 times?Does loading the same 50kb image at the same time mean you're actually loading 150kb?
View 5 Repliesi was creating my portfolio using xml gallery script from this site. the thing is that it loads one picture at a the with a preloader between each load. is there a way to load the first image and keep loading the rest so there will be only one loading time? here is my action script:
[Code]....
Is it possible to capture the image loading event like when the image is fully loaded and such when it is assigned to the htmlText of the textFiel???
I have a scrollPane that contains a textField which is loading an image via img tag where there is no scrollbars initially because the textField is not large enough in the beginning, but it is larger than the scrollPane after the image is fully loaded.. and I am trying to update the scrollPane once the image is fully loaded..
I'm using a for loop to creat a bunch of identical movie clips I want to attach a different sound to each one of these clips. Is there a way to append a variable onto the end of another variable name. (ie. where i = [0,1,2,3,4,etc] variable[i] = variable0, variable1,variable2,variable3,variable4,etc.) below is the part of the code that I am trying to get working:
for (var i:Number = 0; i < xmlData.object_count; i++){
//create movie clips
var boxContainer_mc:boxContainer = new boxContainer();
[code]....
I'm writing an XML preferences file for an Adobe AIR project, and I'd really like to include XML comments. How does one append a comment to XML? The following doesn't work (the file just ends up with a blank line where the comment should be):
ActionScript Code:
var prefs:XML = new XML();
prefs.ignoreComments = false;
[code]....
I need to create a gallery to load images and display them. This part is fine:
/**
* @variable image_name to store the name of the selected item
*/
private function showimage(evt:Event):void
[Code].....
where imgMain is the id the image component.
But, I need a small twist. A transition image i.e. loading image should be displayed while the the image is being loaded.
I'm loading a .png image with loadMovie() and I need to center the image (for later dragging). I know flash has some issues with loading stuff, but I really need to get the movieclip's width. If someone knows how to get over this and get the movieclip's width
This is a part of a more complex app, so that's why I won't paste any code.
I made 1 image gallery. and i am facing a big issue. When one image is loading in my Loader object. If i click on next image button. It starts loading another image without canceling the existing image. So mutliple images appear at stage in this case. I want something that stops loading older image and start loading new image.
View 4 RepliesI am creating an image gallery and the images change but change right back to the original image. I had it working yesterday but today it doesn't work.
[Code]...
What I would like to do is simply add to a dataProvider, but when I do, I get an error. Here's the code I'm trying to run...
dg.dataProvider.addItem(obj.ResultSet.Result[i]);
It's inside a for loop, using i as the integer. It works great doing...dg.dataProvider = obj.ResultSet.Result But that won't work for me, because I need to add to the dataprovider more than once. I'm getting results in batches of 10, and I need to add each batch to the dataProvider when it's received. I also tried to to do...
var dgDP:dataProvider = new dataProvider(); But for some reason Flex doesn't recognize it...
I need to append 4 letters to my variable name when referencing it to get either spanish or english XML data. I am trying to reuse my functions without writing an if statement.
like so:
//two options for
var spa_my_videos:XMLList;
var eng_my_videos:XMLList;
[Code].....