I made 1 image gallery. and i am facing a big issue. When one image is loading in my Loader object. If i click on next image button. It starts loading another image without canceling the existing image. So mutliple images appear at stage in this case. I want something that stops loading older image and start loading new image.
View 4 RepliesI have an existing MovieClip called mc1 on the Stage. That MovieClip has 2 keyframes, the first one has an image in it, and the second one is an empty keyframe.After compiling, I want to load an image (image1) from the library into the the firstkeyframe, and replace the existing image.
I know I need to right click on the image in the library, export it, give it a class name, and I need to assign an url to it which would be 'image1' in this case.I was thinking of this, but I cannot get the url right, and I dont know how to refer to the firstkeyframe after I've loaded it...
var Imagecontainer:Loader = new Loader();
var image:URLRequest = new URLRequest('image1');
Imagecontainer.load(image);
mc1.addChild(Imagecontainer);
I have an existing MovieClip called mc1 on the Stage. That MovieClip has 2 keyframes, the first one has an image in it, and the second one is an empty keyframe.
After compiling, I want to load an image (image1) from the library into the the firstkeyframe, and replace the existing image.
I know I need to right click on the image in the library, export it, give it a class name, and I need to assign an url to it which would be 'image1' in this case.I was thinking of this, but I cannot get the url right, and I dont know how to refer to the firstkeyframe after I've loaded it..
var Imagecontainer:Loader = new Loader();
var image:URLRequest = new URLRequest('image1');
Imagecontainer.load(image);
mc1.addChild(Imagecontainer);
I developing a site where on the homepage, there are about 6 images that rotate, but if you click on a sub link, a different image loads. But the problem is that, the first image has to cycle through before the second image loads. I want the second image to load immediately.
[Code]....
[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.
View 3 RepliesIs it possible to capture the image loading event like when the image is fully loaded and such when it is assigned to the htmlText of the textFiel???
I have a scrollPane that contains a textField which is loading an image via img tag where there is no scrollbars initially because the textField is not large enough in the beginning, but it is larger than the scrollPane after the image is fully loaded.. and I am trying to update the scrollPane once the image is fully loaded..
I am using a qui developed as an opensource flash and running a php script to convert this to xml to drage data from database, this works absolutely fine, but I want to load an image into an empty movie clip and not sure where i am going wrong[code]...
View 0 RepliesI need to create a gallery to load images and display them. This part is fine:
/**
* @variable image_name to store the name of the selected item
*/
private function showimage(evt:Event):void
[Code].....
where imgMain is the id the image component.
But, I need a small twist. A transition image i.e. loading image should be displayed while the the image is being loaded.
I'm loading a .png image with loadMovie() and I need to center the image (for later dragging). I know flash has some issues with loading stuff, but I really need to get the movieclip's width. If someone knows how to get over this and get the movieclip's width
This is a part of a more complex app, so that's why I won't paste any code.
I'm looking to develop an application that essentially allows the user to upload their company logo and have it appear on an image to simulate what a product might look like with their branding on if that makes sense. Does this kind of app have a proper name or search term I could work from? Ideally there'd be a prebuilt solution as my flash isn't very good. I have an idea to achieve this with say PHP and a combination of jquery and css but I think a flash solution would be more elegant.
View 1 Repliesi purchased a slideshow.but slideshow's next&prev button doesnt skip if an image is lost. i want the slider to jump to the next image which is exist. check out the code below.
HTML Code:
function TRANSITION(obj:Object, B:int = -1){
var _a:int = c_pos
var _b:int
[Code]....
I have a database (phpMyAdmin 2.6.0-beta2 ) which holds information which i want to display in a flash form so i'm using an XML file to bridge the gap. After building the application in FLASH and running it the text from the database comes through but no the images. Details of what i'm trying to do are as follows: The XML file
[Code]....
im working on an image viewer and im loading an image to a loader and then add the loader to the stage.I want the user to be able to drag and drop the image but since it's a loader i dont know how to do it.
I tried
imageLoader.startDrag = true;
imageLoader.content.startDrag = true;
but im getting an error on both.
i want to rotate 3D an Image called img1 in Flex. I want to rotate it around y axis 180 degree. I can do this by using 3D effect already built in Flex but i want to do a bit more different. I want during rotating, there's another image called img2 appear on back of img1 (in default case, the image appear on the back is img1) and when rotating finish, the image will be img2.
View 2 RepliesI am working on an Image manipulation application which will be developed using Flash/ C#.Net. Is this possible to save the image manipulations (not the image) saved from Adobe Lightroom for a specific image & then merge these change sets with an image to make a new image using C#.Net?
Also, the application for image manipulation will be developed in the Flash/ Action Script. Please share some links as to how we can save the image manipulations for an image (not the image) so that it can be merged with an image later on.
I am loading images of different size and then images are scaled and border is drawn for each image as shown in below link,[URL]... I want that border of images to be of the same width and height and for that I need to find out the max width and height size image before loading all the images. Is there any way that I can know the width and height of an image before loading it completely?
View 1 RepliesI tried searching for an answer to this on the forums and it seems you can't duplicate a movieclip that has a dynamically loaded jpg in it, I mean you just get a duplicate empty movieclip?What I want to do is have 3 copies of a pic, each tinted a little differently, and have them converge and reveal the "composite" of this pic. Do I then have to use loadMovie 3 times?Does loading the same 50kb image at the same time mean you're actually loading 150kb?
View 5 Repliesi was creating my portfolio using xml gallery script from this site. the thing is that it loads one picture at a the with a preloader between each load. is there a way to load the first image and keep loading the rest so there will be only one loading time? here is my action script:
[Code]....
I am changing image through flex every time i change it saved into server directory with same name(which i am referring to show). So when i refresh my page my browser didn't send new request to server since it's already in request.so didn't getting new image.Tip:- when i clear browser history it will come with new image
View 2 RepliesI have taken over a project that I didn't start and have a quick question. The file loads an external image, which works well. I need it to load a second one but haven't been successful. Here is the current AS3 that works fine:
Code:
import src.JPGEncoder;
import com.dynamicflash.util.Base64;
import flash.utils.ByteArray;
[code]....
I thought I could just initialize a myLoader2 and do everything myLoader does after it does it, but that doesn't work.
This code is loading the xml correctly, populating the mainClipArray correctly, but only adding the last image to the stage.I think it is not waiting for completeClipLoad() to complete. I tried removing :void from the function to see if waiting for a return would do it, but no luck.[code]
View 9 Replies(Building on the chap. 10 example, ActionScript 3.0 for ADOBE FLASH CS4, CIB)Using the 'setSong' function, I am successfully pulling data from the <artist> child of my xml, no problem. But I also want to display the jpg in the <image> node and am having great difficulty. I've tried adding more variables to the setSong function, but am frustratedCould someone shine a little light and point this beginner in the right direction?
function setSongs():void {for(var i = 0; i < 4; i++) {var artistText:String = songList_XML.song[i + songCount].artist;var clipArtist = this["song" + (i + 1)].artist;clipArtist.text = artistText;}}
[code]....
right I'm using unique identifiers to register when an mc has been loaded,I am also calling the mc ["m"+ muid]problem is it aint sticking it in the MC specified... (i've done the same before and it worked it ain't now.
Code:
muid = "m"+dog+"s"+sel+"i"+item+"m"+myv;
//
mpath = ["m"+muid]
[code]...
I am trying to load an image from the twitter api xml file into a movieclip "pic.inner" but something's bugging me and i can't work it out.All the text loads fine but the image won't, sure it's something simple.here is my code:
Code:
package {
import flash.display.MovieClip;
[code].....
I have a fairly simple script that loads an image from XML into a blank movie clip.When I preview it in flash the image loads (and changes) fine. When I view it live in a browser the image does not load but everything else works.This is one child node from the XML:
PHP Code:
<airport name="PBI -Palm Beach International" bgcolor="374B9F" photo="/images/pbi.jpg">
[code].....
I want to load an external jpg,Is it possible to get the dimensions of the file loaded after? It seems straight forward enough and easy to do - but I don't ever remember seeing such a functionality in Flash before.
View 4 RepliesNeed some help on getting my images to load in order rather than trying to all load at the same time. The code I am using at the moment is ..
Code:
var imagesx = new XML();
imagesx.ignoreWhite = true;
imagesx.load("content/xml/action.xml");
imagesx.onLoad = function (success)
[Code]...
I have a page that I'm trying to build that has a scrolling image bar at the bottom but I want to also show the full size image in flash above the images that come up in the thumbnail array when you mouse over each image in the array. I found some code that makes the thumbnail array work but I have no idea how to display the second larger image on mouse over because its loading the images externally... what can I do? Feel free to email me back.
View 1 RepliesCode:
stop();
var imagearr:Array = new Array();
[code].....
i have an image carousel, images being pulled from xml..right now, when you click the image, it slides over and some text appears also comming from the same xml file.. xml set up like this
<?xml version="1.0"?>
<icons>
<icon image="image/Dunne_Lexan.crushed.png" content="Test"
/>
[Code]....
what I would like to happen, is when the user clicks the image, and it slides over, I want a new image to appear from the same xml file here is my AS